Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune IF Series inset receding door mechanism lets an upward-opening cabinet door lift and recede using an up and under flipper slide, so doors clear the work area while staying accessible above the opening. This IF-H360S-16 set is classified as an up and under flipper slide in the multimedia and workspace components category, which fits projects where doors need to move out of the way instead of swinging into the room. The mechanism is designed for inset doors, so the door sits within the cabinet frame when closed, helping maintain clean cabinet lines in workspace or overhead applications. The set is configured for a single door and uses an inset receding motion, which helps when doors are installed over equipment or work surfaces that benefit from overhead clearance.
The IF-H360S-16 mechanism is designed for upward-opening cabinet doors, so the motion supports overhead installations where a lifting action keeps the door above the user. The mechanism handles inset doors with thickness from 11/16 inch to 1-3/16 inch, which defines the construction range that will work with this hardware. A soft-close feature is built into the mechanism, so the door slows as it nears the closed position, which reduces impact at shut. The set also provides adjustable soft-closing speed, so the closing action can be tuned to the movement characteristics of a specific door size within the recommended use range.
The Sugatsune IF Series inset receding door mechanism is categorized under shelf, closet, and garage organization as well as multimedia and workspace components, so it aligns with overhead storage or equipment cabinets where door clearance is critical. Its up and under flipper slide classification defines the motion path, sending the door upward and back, which is well suited to applications above work surfaces or electronics where a swinging door could interfere with use. With a recommended door height of 13-3/4 inches, the IF-H360S-16 pairing supports doors in this size range, which benefits smaller overhead compartments commonly found in multimedia or workspace cabinetry. The single left side stay layout means the support hardware is concentrated on the left, which guides how the cabinet interior is laid out around the mechanism.
The upward-opening design of this Sugatsune IF Series mechanism directs the door to lift clear of the user, which supports uninterrupted access to the cabinet interior during work. The inset configuration keeps the door face within the cabinet frame when closed, which helps maintain aligned fronts in built-in storage or workspace runs. Door thickness compatibility from 11/16 inch to 1-3/16 inch gives flexibility to use different panel materials and build-ups while staying within the system's intended range. The soft-close feature slows the door at the end of travel, which reduces closing impact on the cabinet structure. Adjustable soft-closing speed lets the closing behavior be matched to the door's mass and height within the recommended 13-3/4 inch door range, which supports consistent motion across similar cabinets.
The IF-H360S-16 mechanism is designed for upward-opening cabinet doors using an up and under flipper slide action, so the door lifts and recedes above the opening.
The Sugatsune IF Series inset receding door mechanism supports doors from 11/16 inch to 1-3/16 inch thick, which covers many common cabinet door constructions.
The IF-H360S-16 has a recommended door height of 13-3/4 inches, which aligns the hardware geometry with typical smaller overhead cabinet doors.
The Sugatsune IF Series inset receding door mechanism has a soft-close feature that prevents slamming by slowing the door as it reaches the closed position.
The IF-H360S-16 mechanism offers adjustable soft-closing speed, so the closing rate can be tuned to the specific door within the supported size range.
The IF-H360S-16 configuration uses one left side stay, so the primary support stay is positioned on the left side of the cabinet opening.
The Sugatsune IF Series inset receding door mechanism set with one left side stay provides an up and under flipper slide solution for upward-opening cabinet doors, supporting door thickness from 11/16 inch to 1-3/16 inch and a recommended 13-3/4 inch door height. The soft-close feature with adjustable soft-closing speed adds controlled closing for overhead or workspace cabinets where consistent motion is important. For projects using inset doors in shelf, closet, garage, or multimedia workspace layouts, the IF-H360S-16 specification aligns the door motion with overhead clearance and controlled closing behavior.
