Sugatsune IF Series 11/16" - 1-3/16" Door Thickness Inset Receding Door Mechanism Set with 1-Left Side Stay, Recommended Door Height 11-13/16", - IF-H360S-14
Description
Sugatsune IF Series Inset Receding Door Use
Sugatsune IF Series inset receding door mechanism set is designed for upward-opening cabinet doors so you can move doors cleanly out of the way during use. The mechanism is built as an up and under flipper slide, so the door lifts and recedes rather than swinging out into the work area, which helps keep access to shelves or equipment clear. This set is configured for inset doors, so the door sits within the cabinet frame for a flush front that supports clean, planned layouts. Sugatsune America engineering focuses this IF Series mechanism specifically on receding movement, so doors travel in a guided arc and slide that supports consistent operation on repeated cycles. The mechanism is identified by manufacturer part number IF-H360S-14, which ties directly to its dimensional range and stay configuration for planning multiple openings.
Key IF-H360S-14 Details For Project Planning
- The recommended door height of 11-13/16 inches matches the IF-H360S-14 geometry, so the up and under motion tracks correctly across the opening and keeps the door aligned during travel.
- The door thickness range of 11/16 to 1-3/16 inch allows the mechanism to work with common cabinet door builds, so you can pair it with doors that match your construction without changing core materials.
- The set uses a single left side stay, so the support and control act from the left, which helps when you are laying out asymmetric cabinets or matching existing left-driven hardware.
- The IF Series inset design keeps the door positioned inside the cabinet frame when closed, so you can maintain a flush facade across multiple openings and keep face lines consistent in a run.
- The IF-H360S-14 mechanism is classified as an up and under flipper slide, so the movement path is defined for receding doors, which simplifies selecting hardware for overhead or workspace cabinets.
Upward-Opening Door Fit And Soft-Close Control
The IF-H360S-14 mechanism is specified for upward-opening cabinet doors, so the hardware motion supports doors that pivot up before receding, useful for overhead or workspace cabinets where swing-out doors would obstruct access. The soft-close feature is built into this mechanism so the door slows as it approaches the closed position, which reduces impact at the cabinet front and supports quieter operation in regular use. Adjustable soft-closing speed allows you to tune how quickly the mechanism draws the door closed, so you can balance door weight, user feel, and alignment based on the actual door construction.
How This IF Series Mechanism Works In Use
Where The IF-H360S-14 Receding Door Mechanism Fits
This IF Series unit is categorized as an up and under flipper slide, so it suits projects that need an upward-opening door to rise and then recede above or behind the opening, such as cabinets over benches or multimedia components. The recommended door height of 11-13/16 inches aligns the pivot and slide relationship with the opening, so the door clears the face frame or case edges while traveling. The 11/16 to 1-3/16 inch door thickness range means the mechanism accommodates doors built from typical cabinet materials, so you can use standard panel builds while staying inside the working geometry. With a single left side stay defined in the description, the IF-H360S-14 suits layouts where motion control is concentrated on the left side of the opening, which can coordinate with adjacent hardware, wall conditions, or service clearances in the shop or field.
Why IF-H360S-14 Details Support Repeatable Results
The upward-opening cabinet door design of the IF-H360S-14 sets the motion pattern, so once door height and thickness fall within the specified ranges, the hardware delivers predictable travel that simplifies repeating the same configuration across multiple cabinets. The inset receding door design keeps the closed door flush with the cabinet plane, so alignment marks, reveals, and gaps can be replicated from cabinet to cabinet using the same reference positions. The soft-close feature reduces closing shock at the contact point, which helps maintain consistent gaps and reduces the tendency for doors to bounce back from the face. Adjustable soft-closing speed lets you match the mechanism response to each door build, so differences in material weight or width can still run on the same model while you dial in the closing behavior for a uniform feel across an installation.
Common Questions About The IF-H360S-14 Mechanism
What type of cabinet doors use the IF-H360S-14?
The IF-H360S-14 mechanism is for upward-opening cabinet doors, so it suits overhead, multimedia, or workspace cabinets that need the door to lift and move out of the way.
How does the door thickness range affect use?
The 11/16 to 1-3/16 inch door thickness range lets the mechanism work with common cabinet door builds, so typical panel constructions fall inside the supported geometry.
Why is the recommended 11-13/16 inch door height important?
The recommended 11-13/16 inch door height matches the IF-H360S-14 motion path, so the door clears the cabinet opening and follows the intended up and under travel.
What does the single left side stay do on this set?
The single left side stay on the IF-H360S-14 carries control on the left, so lift and receding motion are governed from that side for consistent movement.
How does the soft-close feature change cabinet operation?
The soft-close feature slows the door as it shuts, so closing is quieter and impact at the cabinet front is reduced during everyday use.
What is the benefit of adjustable soft-closing speed?
Adjustable soft-closing speed lets the IF-H360S-14 match different door weights, so the closing feel can be tuned for smoother, more controlled motion.
Selecting The IF-H360S-14 For Your Next Cabinet Run
The Sugatsune IF-H360S-14 inset receding door mechanism set ties upward-opening motion, soft-close action, and a defined door height and thickness range into one up and under flipper slide, so cabinet runs with overhead fronts gain a clear operating standard. By working within the 11-13/16 inch recommended door height and the 11/16 to 1-3/16 inch door thickness range, you can design doors that follow the intended path and gain controlled soft-closing. For projects calling for an inset upward-opening cabinet door with a single left side stay, this IF Series mechanism offers a focused solution you can specify and repeat.