Sugatsune IF Series 11/16" - 1-3/16" Door Thickness Inset Receding Door Mechanism Set with 1-Left Side Stay, Recommended Door Height 21-13/16", - IF-H360S-24
Description
Sugatsune IF Series Inset Receding Door Mechanism
Sugatsune IF Series inset receding door mechanism is a set designed for upward-opening cabinet doors, so it handles the lift and slide motion that keeps a front up and out of the way during access. The mechanism is specified as an up and under flipper slide, which means the door can move up and then recede, helping keep the opening clear while the cabinet is in use. This set is listed with a recommended door height of 21-13/16 inches, giving a clear target when planning door size around the mechanism geometry. The door thickness range of 11/16 inch to 1-3/16 inch covers many common cabinet door constructions, which matters when matching this hardware to existing or new doors. The mechanism is identified as IF-H360S-24, so it aligns with Sugatsune America documentation for this specific configuration.
Key Working Details For Cabinet Door Planning
- The mechanism is described as an up and under flipper slide, which supports doors that need to move up and then recede, helping keep the cabinet front clear in tight workspaces.
- This set is for upward-opening cabinet doors, so the motion assists doors that need to pivot up rather than swing out, which can reduce door interference with adjacent fixtures.
- The recommended door height of 21-13/16 inches ties the hardware to a defined door proportion, helping keep the lifting and receding motion within its intended operating range.
- The door thickness range of 11/16 inch to 1-3/16 inch gives a defined envelope for door construction, which helps align core material choices with the mechanism design.
- The set is specified with one left side stay, so the working components on that side manage the controlled motion for the upward-opening action.
- The mechanism is identified as Sugatsune America IF-H360S-24, which links the job directly to a named part number for ordering and documentation.
Soft-Close Motion And Adjustment In Use
This Sugatsune IF Series mechanism is noted as having a soft-close feature that prevents slamming, so the hardware slows the final portion of travel as the upward-opening cabinet door returns to the closed position. That matters where repeated use could otherwise create noise or impact at the face frame. The mechanism also has an adjustable soft-closing speed, so the damping can be tuned within its design range to better match the door size and thickness supported by the specified 11/16 inch to 1-3/16 inch range. Being described as an inset receding door mechanism means it is intended for doors that sit within the cabinet opening and then move up and under, which affects how the closing speed adjustment is perceived during everyday operation.
Using This Up And Under Flipper Slide On Jobs
Where The IF-H360S-24 Mechanism Is Applied
The IF-H360S-24 mechanism is described as a Sugatsune IF Series inset receding door mechanism set with one left side stay, so it is oriented to applications where the stay on the left side manages the upward-opening motion. Being categorized under overhead flipper slides and noted as an up and under flipper slide ties it to overhead or upper cabinets where doors need to rise rather than swing, such as workspace or multimedia cabinet fronts. The recommended door height of 21-13/16 inches anchors this hardware to medium-height fronts, which can balance weight within the door thickness range of 11/16 inch to 1-3/16 inch. Because the mechanism is specified for upward-opening cabinet doors, it fits layouts where a traditional hinged door could project into work zones, so the up and under motion helps keep that area clearer during use.
Why The Verified Details Support Repeatable Results
The Sugatsune IF Series designation, combined with the IF-H360S-24 part number, gives a precise hardware identity, which supports consistent selection across multiple cabinets on the same project when the same motion is required. The defined door thickness range of 11/16 inch to 1-3/16 inch narrows material choices, helping keep the door weight and edge build within what the mechanism is described to work with. The recommended door height of 21-13/16 inches ties into leverage and motion control, which supports smoother operation within the capabilities of the up and under flipper slide design. Having a soft-close feature that prevents slamming directly affects long-term door handling, because the impact is reduced at every cycle. The adjustable soft-closing speed gives another tuning point, so the installer can align closing behavior with the specific upward-opening cabinet door dimensions and construction that fall within the stated ranges.
Common Questions About This Sugatsune IF Mechanism
What type of cabinet doors is the IF-H360S-24 designed for?
The IF-H360S-24 mechanism is designed for upward-opening cabinet doors, so it supports doors that need to lift rather than swing out in front of the cabinet.
How tall should the door be for this IF Series mechanism?
The IF-H360S-24 mechanism lists a recommended door height of 21-13/16 inches, guiding door sizing so the up and under motion operates within its described range.
What door thickness range does this inset receding mechanism support?
The Sugatsune IF Series inset receding door mechanism set is specified for door thickness from 11/16 inch to 1-3/16 inch, covering many common cabinet door builds.
Does this up and under flipper slide offer soft closing?
The IF-H360S-24 mechanism has a soft-close feature that prevents slamming, so the door slows at the end of travel during closing for quieter operation.
Can the soft-closing speed be adjusted on this Sugatsune mechanism?
The Sugatsune IF Series mechanism is described with adjustable soft-closing speed, so the closing behavior can be tuned within its design range for the specific door.
What does the left side stay detail mean for installation layout?
The mechanism set is specified with one left side stay, so the working stay installs on the left side to control the upward-opening door motion.
Selecting This IF-H360S-24 For Your Next Cabinet
The Sugatsune IF Series inset receding door mechanism IF-H360S-24 combines an up and under flipper slide layout with soft-close operation, so it supports upward-opening cabinet doors that need controlled, quiet motion. With a recommended door height of 21-13/16 inches and a door thickness range of 11/16 inch to 1-3/16 inch, it targets a defined set of cabinet door sizes. The one left side stay arrangement shapes how the motion is supported along that side. For projects calling for this style of upward-opening cabinet door hardware, aligning door dimensions to these verified details helps this mechanism perform within its described operating range.