Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune pivot hinge free swinging design in the GPH-40L model supports inset glass or acrylic doors where smooth pivoting is needed, so you can plan door motion without built-in closing force. This hinge is classified as a glass door hinge in the Sugatsune America line, giving installers a dedicated option for framed or casework projects using glass panels. The left-hand GPH-40L pattern is specified for left-lower and right-upper positions, which clarifies hinge orientation when laying out a door set. That same orientation detail helps avoid trial-and-error on site, because the mounting position is defined by the part number. A black finish on this hinge creates a dark, low-visibility look against dark frames or shadow lines, which supports clean sightlines in display, furniture, or architectural applications.
The GPH-40L description states that pre-drilling on glass or acrylic is not required, which affects installation by allowing the hinge interface to engage the panel without hole boring operations. Because the hinge is screw-on, the fastening is directed to the supporting structure rather than to drilled glass, so casework or frame members carry the screws. The orientation note "Left: For left-lower/right-upper" ties hinge position directly to the part, simplifying layout when you locate the pivot points on an inset door. That same orientation mapping also keeps left and right door stations consistent where multiple openings share the same hardware pattern.
The SAP description calls this part a pivot inset glass door hinge in black, which defines its role in installations where a glass or acrylic door sits within the cabinet or frame opening. Within the Sugatsune America glass door hinges category, this hinge is suited to applications that specify a free swinging pivot rather than a controlled-close unit. The Web description notes it for glass and acrylic, so it fits projects like display cases, wall units, or furniture doors that use clear or plastic panels. Because the hinge is left-hand and mapped to left-lower and right-upper positions, it is especially relevant on installations where a matched right-hand hinge will be used on the opposite corners.
The designation GPH-40L clearly identifies this hinge as a specific left-hand component, which matters when ordering and staging hardware by position on the door. The guidance that the left version is for left-lower and right-upper locations turns the part number into a layout reference on drawings and shop tickets, reducing rework when doors are hung. The Web description further states that GPH-40R-G and GPH-40L-G should be used with the socket PHB4, showing how this pivot family interfaces with that socket for supported mounting at the pivot points. Because pre-drilling on glass or acrylic is not required, the hinge concept avoids aligning to factory-drilled holes, giving fabricators flexibility to set hinge positions to suit reveals and clearances around the inset glass panel.
The GPH-40L is described as a pivot inset glass door hinge for glass or acrylic doors, which directs it toward framed openings where the panel sits inset.
The product name identifies the Sugatsune free swinging pivot hinge design, so the hinge allows the door to pivot without an integrated self-closing mechanism.
The hinge is described as screw-on, so it is fastened with screws to the supporting structure, allowing typical casework fastening methods around the pivot point.
The Web description states that the left version is used at left-lower and right-upper positions, guiding where the GPH-40L should be located on the door corners.
The description specifies that pre-drilling on glass or acrylic is not required, so the hinge interface does not depend on drilled holes in the panel.
The Web description notes that GPH-40R-G and GPH-40L-G should be used with socket PHB4, indicating how this pivot family is paired with that socket component.
The GPH-40L Sugatsune pivot hinge combines a free swinging action, screw-on attachment, and no pre-drilling requirement for glass or acrylic, which supports straightforward installation planning. Its defined use on left-lower and right-upper positions helps organize parts by door corner, while the inset glass door classification focuses it on framed openings using glass panels. For projects needing a black glass door hinge that aligns with Sugatsune America component references and the PHB4 socket pairing guidance, this model provides a clearly identified option to specify and deploy.