Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune Free Swinging Pivot Hinge gives you a screw-on black hinge option for glass or acrylic doors where pre-drilling on glass/acrylic is not required, which helps keep installation focused on layout and alignment instead of hole preparation. The hinge is identified as a PIVOT UPPER SIDE GLASS DOOR HINGE LH, so it is set up for a defined orientation on the upper side of the door, simplifying how you plan your door swing. This hinge is described as left for left-lower/right-upper, so you can assign it to the correct corner of the door and frame based on the door position. The manufacturer part number GPH-41HL-G ties this hinge directly to Sugatsune America documentation and matching components during planning, which supports consistent hardware selection across a job.
This PIVOT UPPER SIDE GLASS DOOR HINGE LH is defined as a screw-on black hinge, so it mounts by screwing the hinge into its mating surfaces rather than relying on pre-drilled glass holes. Because pre-drilling on glass/acrylic is not required, the installation focuses on accurate hinge placement on the glass or acrylic edge area instead of drilling alignment through the panel. The description identifying the hinge as left for left-lower/right-upper gives you a clear pattern for which corner of the door this piece is intended to serve, guiding how you position the door relative to the cabinet or case opening.
The product is categorized under Hinges and Glass Door Hinges, so it is targeted at glass door hinge applications where a pivot action is needed. The SAP description PIVOT UPPER SIDE GLASS DOOR HINGE LH points to its use on the upper side of a left-hand corner in a glass door setup, helping you assign it to that specific pivot position in the design. The note left for left-lower/right-upper further clarifies that this hinge suits a configuration where a left-lower or right-upper corner carries this part, so you can match it to the door swing direction and frame layout. The brand identification as Sugatsune America means it is part of the Sugatsune hinge system, so it can be incorporated into projects already using Sugatsune glass door components for consistent operation. The classification as a glass door hinge aligns it with glass or acrylic doors, fitting situations where transparent or translucent panels are part of the casework.
The description pre-drilling on glass/acrylic not required means the hinge is intended to mount without putting drill holes through the glass or acrylic panel, which keeps the workflow centered on controlled screw-on attachment at the mounting area. As a screw-on black hinge, it relies on screw fastening, allowing you to base placement on precise edge and reveal measurements rather than glass drilling tolerances. The orientation note left for left-lower/right-upper gives a repeatable rule for which corner uses this hinge, supporting consistent door alignment from one cabinet to the next. The web description references that GPH-40R-G and GPH-40L-G should be used with the socket PHB4, indicating that specific related Sugatsune parts are associated through socket PHB4 in similar hinge setups, which helps when you are planning coordinated glass door hardware in a project.
The hinge is categorized as a glass door hinge and described for glass/acrylic, so it is aimed at supporting glass or acrylic door applications in hinge layouts.
The hinge is described as screw-on black, so it is mounted using screws to fasten it to its mating surfaces in the glass or acrylic door assembly.
The PIVOT UPPER SIDE GLASS DOOR HINGE LH description identifies it as a left-hand hinge used on the upper side of a glass door, defining its position.
The web description states pre-drilling on glass/acrylic not required, so the hinge is intended to be installed without drilling through the glass or acrylic.
The description left for left-lower/right-upper explains that this hinge is intended for either the left-lower or right-upper hinge position on the glass door.
The web description notes that GPH-40R-G and GPH-40L-G should be used with the socket PHB4, identifying related Sugatsune hinge components.
The Sugatsune Free Swinging Pivot Hinge, identified as PIVOT UPPER SIDE GLASS DOOR HINGE LH with part number GPH-41HL-G, gives you a screw-on black option for glass or acrylic doors where pre-drilling on glass/acrylic is not required. The left for left-lower/right-upper description defines its positional role in the hinge set, supporting a consistent door layout. For projects using glass or acrylic doors and targeting Sugatsune America hardware, this glass door hinge aligns with that specification for an upper side pivot position.