Nova Pro Scala H186 Drawer Member Set with 154lb Capacity, Full Extension, Soft-Closing, 7-5/16", Silver, 26

Nova Pro Scala H186 Drawer Member Set For Heavy Use

Nova Pro Scala H186 drawer member set is a Grass America drawer construction component designed for projects that need a slim, deep metal drawer side with integrated adjustment. The set is part of the Grass Nova Pro Scala drawer system, so it works within that platform when building drawers that match the system layout. The drawer member has a height of 7-5/16 inches, giving you a tall side for higher drawer fronts or deeper storage, which helps keep contents supported during opening and closing. Its 26 inch (650 mm) length provides a long, stable runner for cabinets built around that nominal depth. A full extension design lets the drawer travel completely out of the cabinet on the slides, so stored items remain accessible from front to back without reaching over the front rail. Soft-closing functionality is built in, so the drawer transitions into a controlled closing movement at the end of travel, reducing slamming forces on the cabinet and front.

Key Nova Pro Scala Drawer Performance Details

• The drawer member set is rated for a dynamic load capacity of up to 154 lb (70 kg), so the slide system supports heavier drawer contents in service when matched with a cabinet and drawer box built for that load.
• High stability is specified for this slim, deep drawer side up to a front height of 780 mm (30-11/16 inches), which supports the use of tall fronts without excessive side flexing during repeated opening.
• Fully synchronized slide technology keeps both runners moving together during opening and closing, which helps the drawer track straight and reduces racking forces on the box and cabinet side.
• The soft-close damping system slows the final part of the closing action, so the drawer settles into the cabinet more quietly, which can reduce wear on fronts, face frames, and internal stops over time.
• Integrated height, side, and tilt adjustment at the drawer connection lets the installer fine-tune the front position within the opening, helping align reveals and correct for minor casework variation on site.

Installation And Adjustment For Drawer Alignment

The Nova Pro Scala H186 drawer member set is designed as a full extension slide within the Grass Nova Pro Scala drawer system, so it installs as part of that coordinated hardware group. Integrated height adjustment at the connection point allows vertical movement of the drawer front relative to the cabinet opening, which helps bring multiple fronts into a consistent top line. Side adjustment shifts the front horizontally, so small gaps between fronts or between front and cabinet side can be evened out after the drawer is hanging on the runners. Tilt adjustment lets the front be set slightly in or out at the top, which is useful for matching adjacent fronts on tall banks where carcass conditions vary from level or plumb, and it supports a cleaner visual line.

Using Grass Nova Pro Scala Members In Cabinet Runs

Where This Nova Pro Scala H186 Member Fits Best

The Nova Pro Scala H186 drawer member set from Grass America is specified as a slim, deep drawer side, so it suits applications where the metal side forms both the drawer wall and part of the visual design. The 7-5/16 inch nominal height supports drawer fronts up to 780 mm, which aligns with projects using tall fronts such as deeper storage drawers or contemporary wide fronts in kitchen, bath, or shop cabinets that follow the Grass Nova Pro Scala system layout. Its 26 inch (650 mm) length matches cabinet depths built around that measurement, so it fits installations designed for a 26 inch runner without needing alternative slide lengths. The 154 lb dynamic capacity is suited for drawers intended to hold heavier contents when the cabinet, bottom, and joints are engineered to carry that loading over the life of the installation.

Why The Slide Technology Supports Repeatable Results

The fully synchronized slide technology on this Nova Pro Scala H186 member set coordinates both sides of the drawer during movement, which helps the box open and close without the uneven feel that can occur when one runner advances faster than the other. This synchronized action reduces twisting stress on the drawer box joints, which is particularly important with taller drawer sides and higher fronts that can amplify racking under load. Full extension travel gives the same predictable stop point at every cycle, so hole patterns and clearances designed around the 26 inch length remain consistent from cabinet to cabinet. Integrated height, side, and tilt adjustments let the installer tune the front position using the hardware already part of the runner connection, which streamlines alignment work compared to systems that rely only on repositioning the box. Soft-closing damping at the end of travel supports repeated closings with a similar feel, which helps maintain front alignment over time because fronts are not subjected to abrupt impacts at the face of the cabinet.

Common Questions About This Nova Pro Scala Set

Selecting This Nova Pro Scala Member For Your Project

The Nova Pro Scala H186 drawer member set from Grass America combines a 26 inch full extension runner, 7-5/16 inch slim deep side, and 154 lb dynamic capacity in a silver finish. For projects built around the Grass Nova Pro Scala drawer system, this member provides synchronized slides, soft-close damping, and integrated height, side, and tilt adjustment that support precise front alignment on heavier or taller drawers.