Vauth-Sagel COR Flex Planero 15" Opening 4 Tray Blind Corner Kit with Soft-close Slides in Carbon Steel Gray, BOMCORFLEXPL15CSG

Vauth-Sagel COR Flex Planero Blind Corner Kit Use

Vauth-Sagel COR Flex Planero 15" opening blind corner kit organizes a blind corner cabinet with four trays, so the interior space becomes easier to reach and to use in a kitchen layout. This blind corner organizer kit is built as a frame and slide mechanism with soft-close, so both pull-outs move smoothly back into the cabinet and stop gently, which matters when a cabinet is opened and closed many times a day. The blind corner unit is rated at 17 lb per shelf, so each tray can handle typical stored items up to that load without overstraining the system. Minimum installation depth of 21-5/8" defines the cabinet interior space this blind corner pull-out needs, so the trays clear the opening and the mechanism works within the box. Minimum installation height of 20-1/3" sets the vertical opening required, so the four-tray kit fits between cabinet bottom and any obstructions above.

Key COR Flex Planero Details For Cabinet Projects

• The minimum installation depth of 21-5/8" positions the frame correctly inside the cabinet, which lets the slides run their full travel without binding on the face frame or back.
• The minimum installation height of 20-1/3" defines the usable opening, which helps the four trays move in and out without hitting a cabinet shelf or underside of the countertop.
• The 17 lb per shelf weight rating sets a clear load guideline, which helps plan what to store on each tray so the blind corner organizer operates consistently over time.
• The frame finish in carbon steel gray provides a uniform look, which helps the hardware blend with modern cabinet interiors using similar neutral tones.
• The tray bottoms available in carbon steel gray and walnut offer finish options, which lets the installer align tray appearance with cabinet color or project design intent.

Blind Corner Kit Mounting And Slide Operation

The Vauth-Sagel COR Flex Planero blind corner pull-out uses integrated soft-closing and self-closing on both pull-outs, so each movement into the cabinet is pulled gently to the final position and held shut, which can reduce door bounce and racking on the frame. The blind corner organizer uses unhanded installation, so the same unit works on either left or right applications, which simplifies planning when cabinet layouts change during a project. An installation template is provided so no measuring is necessary when installing into the cabinet, which streamlines layout and drilling and helps keep mounting positions consistent between multiple units on a job.

Using This COR Flex Planero Blind Corner System

Where The Vauth-Sagel Blind Corner Organizer Fits

The COR Flex Planero blind corner pull-out is specified for a 15" opening, so it targets cabinets built around that front access width, which is common in many kitchen blind corner configurations. The minimum installation depth of 21-5/8" means the cabinet box must extend at least that far from the front, which positions the slide mechanism so trays can swing and extend without clipping the back panel. Minimum installation height of 20-1/3" sets the vertical envelope around the trays, which helps when coordinating toe kick height, cabinet bottom thickness, and any interior obstructions. With four trays in the kit, the organizer uses the available height for multiple storage levels, which can concentrate frequently used items toward the front and keep other items accessible deeper in the cabinet. The frame finish in carbon steel gray pairs with tray bottoms offered in carbon steel gray and walnut, which supports different interior looks while keeping the same structural layout for each project.

Details That Support Consistent Blind Corner Performance

The integrated soft-closing and self-closing on both pull-outs controls the last part of the slide travel, which reduces sudden impacts at full close that can shift stored items or stress mounting points over repeated use. The 17 lb per shelf weight rating applies to each tray in the four-tray kit, which provides a predictable capacity reference when distributing heavier and lighter contents across the system. The unhanded installation design allows the same BOMCORFLEXPL15CSG blind corner unit to serve either left or right cabinet corners, which can simplify ordering and inventory for shops outfitting multiple kitchens. An installation template that requires no measuring during cabinet installation creates repeatable hole locations, which supports faster workflow when installing several units and helps keep alignment between frame, slides, and trays consistent. The specified 15" opening, depth, and height parameters act as fixed layout constraints, which allow designers and installers to coordinate cabinet construction, adjacent appliances, and interior storage plans around this blind corner organizer kit.

Common Questions About COR Flex Planero Blind Corners

Selecting This Blind Corner Kit For Your Project

The Vauth-Sagel COR Flex Planero 15" opening blind corner kit combines a 15" opening specification, 21-5/8" minimum depth, and 20-1/3" minimum height, so it fits defined cabinet conditions when planning new or retrofit work. The four-tray layout, 17 lb per shelf rating, and integrated soft-closing and self-closing on both pull-outs create a structured storage system that supports everyday kitchen access. With unhanded installation and an installation template that removes measuring from the process, this blind corner organizer kit suits shops and installers who want repeatable results on multiple cabinets using the BOMCORFLEXPL15CSG unit.