Vauth-Sagel COR Flex Planero 17-1/2" Opening 4 Tray Blind Corner Kit with Soft-close Slides in Carbon Steel Gray, BOMCORFLEXPL17CSG

Vauth-Sagel COR Flex Planero Blind Corner Kit Use

Vauth-Sagel COR Flex Planero 17-1/2" Opening 4 Tray Blind Corner Kit describes a blind corner organizer that fits a 17-1/2 inch opening, so it targets common blind base cabinet sizes and helps reclaim otherwise hard-to-reach storage space. The product class as blind corner organizers means the trays pull outward from the corner, giving direct access to stored items instead of reaching deep into the cabinet. The minimum installation depth of 21-5/8 inches defines the cabinet interior space required, which helps plan cabinet layouts so the frame and slides operate without interference. The minimum installation height of 20-1/3 inches sets the vertical clearance needed, guiding tray spacing so the full stack of four trays moves freely. The frame finish in carbon steel gray provides a neutral appearance that coordinates with many interior cabinet colors while presenting a consistent, professional look inside the cabinet.

Blind Corner Organizer Details That Support Workflow

• The minimum installation depth of 21-5/8 inches allows the slide mechanism to extend fully, which supports smooth tray travel when the cabinet carcass meets that depth requirement.
• The minimum installation height of 20-1/3 inches establishes the vertical envelope for the four-tray stack, so the trays can move without contact with face frames or internal obstructions.
• The unhanded installation means the same kit can mount in either left- or right-hand blind corners, which simplifies planning and reduces the need for separate part numbers on different cabinet runs.
• The integrated soft-closing and self-closing on both pull-outs slows the closing motion, which helps the trays return to the cabinet in a controlled way and reduces slamming against the frame.
• The weight rating of 17 lb per shelf defines a load capacity per tray, which guides how heavily each tray can be loaded while maintaining intended performance.
• The tray bottom finish availability in carbon steel gray and walnut offers two visual options, supporting cabinet designs that call for either a uniform gray interior or a warmer, contrasting tray surface.

Blind Corner Kit Installation And Fit Parameters

The COR Flex Planero 17-1/2" opening blind corner kit uses an installation template that allows mounting without independent measuring, which streamlines layout and helps repeat the same position in multiple cabinets. The unhanded installation characteristic means the same frame and slide mechanism fits either cabinet orientation, so crews can standardize on one configuration. The minimum installation depth of 21-5/8 inches and minimum installation height of 20-1/3 inches define the cabinet envelope, which supports predictable motion of the pull-outs when those dimensions are present. Integrated soft-closing and self-closing on both pull-outs is built into the slides, so the closing behavior does not depend on external dampers and remains consistent across installations in a project.

Using This COR Flex Planero Blind Corner Organizer

Where This Blind Corner Pull-Out Kit Fits Best

The COR Flex Planero 17-1/2" opening blind corner kit is classified under kitchen and bath cabinet accessories and blind corner pull-outs, so it is intended for use in blind corner base cabinets in those spaces. The minimum installation depth of 21-5/8 inches suits base cabinets with standard depths that meet or exceed that dimension, allowing the frame and soft-close slides to function through their full travel. The minimum installation height of 20-1/3 inches aligns with typical interior space in many base cabinets, leaving room for the four trays to stack while still clearing the cabinet opening. The unhanded installation feature supports use on both left and right blind corners within the same job site, which keeps layout flexible without changing the product. The frame finish of carbon steel gray provides a contemporary interior color that blends with many hinge arms and drawer systems that also use gray finishes.

Details That Support Repeatable Installation Results

The installation template provided for the COR Flex Planero blind corner pull-out means installers can place the frame and slide mechanism using a fixed reference, which helps maintain consistent clearances between jobs. The integrated soft-closing and self-closing on both pull-outs is engineered into the slide system, so once mounted according to the template the closing action remains smooth and uniform across all trays. The weight rating of 17 lb per shelf defines the upper load expectations for each tray, which supports planning for stored items so the movement and soft-close function stay within the slide design. The kit structure as a four-tray configuration organizes the vertical space inside the blind corner, which helps allocate items across multiple levels instead of concentrating weight in one area. The tray bottom finish options of carbon steel gray and walnut allow selection of a surface tone that complements surrounding cabinetry, which can be important on open or glass-door installations where interior hardware is visible.

Common COR Flex Planero Blind Corner Questions

Choose This Blind Corner Kit For Targeted Cabinet Use

The COR Flex Planero 17-1/2" Opening 4 Tray Blind Corner Kit with soft-close slides is defined for blind corner cabinet applications, giving a clear match between product and installation type. The minimum installation depth of 21-5/8 inches and height of 20-1/3 inches outline the cabinet parameters, helping align this kit with suitable base units. The unhanded installation and integrated soft-closing on both pull-outs simplify planning across left and right corners. For projects needing a carbon steel gray frame finish and tray bottoms available in carbon steel gray and walnut, this Vauth-Sagel organizer offers those specific interior appearance options.