Vauth-Sagel COR Flex Planero 17-1/2" Opening 4 Tray Blind Corner Kit with Soft-close Slides in Platinum/Maple, BOMCORFLEXPL17WNT

Vauth-Sagel COR Flex Planero Blind Corner Kit Use

Vauth-Sagel COR Flex Planero blind corner kit turns a 17-1/2 inch opening blind corner cabinet into a four-tray pull-out organizer, so hard-to-reach space becomes accessible storage that can be brought out to the front of the cabinet.

This blind corner kit is classified as a Blind Corner Organizer within Kitchen & Bath Cabinet Accessories, which means it is designed specifically to organize and present contents from a blind corner base rather than acting as a general shelf system.

The kit uses a frame and slide mechanism to support four trays, so each level operates as a defined storage surface, helping cabinets stay organized by separating items on individual trays instead of stacking everything on a single deep shelf.

The product is identified by manufacturer part BOMCORFLEXPL17WNT, giving installers a precise reference when matching this blind corner pull-out to drawings, orders, or future service work on the same cabinet installation.

The tray bottom finish is available in Carbon Steel Gray and Walnut, so the storage surfaces can visually coordinate with different cabinet interiors, helping installations align with project finish selections where a specific interior look is specified.

Practical Details That Support Blind Corner Work

• The minimum installation depth of 21-5/8 inches defines how far the cabinet must extend, so installers can verify cabinet depth against this value to understand whether the slide mechanism has full travel.
• The minimum installation height of 20-1/3 inches sets the required interior vertical space, which determines whether four trays can be stacked with proper clearance inside the blind corner cabinet.
• The frame has a Carbon Steel Gray finish, so the structural parts present a uniform appearance inside the cabinet, supporting projects where interior hardware color needs to coordinate with other gray-toned components.
• The tray bottoms are available in Carbon Steel Gray and Walnut finishes, giving flexibility to match darker or wood-toned interiors so the trays visually integrate with surrounding cabinetry.
• The product is sold as a 4-tray kit, which means the organizer provides four distinct storage levels, allowing installers to plan how to distribute items across multiple tiers in the blind corner.

Installation Dimensions And Soft-Close Slide Action

The minimum installation depth of 21-5/8 inches defines the cabinet interior depth needed for the slide mechanism to operate, so when that depth is present, the pull-out action can run within its designed travel range.

The minimum installation height of 20-1/3 inches establishes the interior height required to fit the frame and four trays, which affects how this kit aligns with neighboring drawers or shelves in the same base cabinet run.

The kit uses integrated soft-closing and self-closing on both pull-outs, so the trays return into the cabinet under controlled motion, reducing abrupt closing and supporting smoother operation every time the organizer is used.

The installation template feature means installation uses positional guidance instead of manual dimension layout, which removes measuring steps from the workflow and allows repeatable hole and frame placement across multiple cabinets.

Using COR Flex Planero Kit In Cabinet Projects

Where This Blind Corner Organizer Fits Best

This product is a blind corner pull-out within the Kitchen & Bath Cabinet Accessories category, so it is intended for use in blind corner base cabinets in kitchen or bath installations where a pull-out organizer is specified instead of fixed shelving.

The 17-1/2 inch opening requirement defines the cabinet opening width this COR Flex Planero 4-tray kit is designed around, which guides cabinet selection or layout so the door and face frame provide enough clearance for the trays to move.

The minimum installation depth of 21-5/8 inches means this organizer is suited to cabinets that meet or exceed that depth, helping installers know when a standard-depth blind corner base can accommodate the frame/slide mechanism.

The minimum installation height of 20-1/3 inches aligns the product with base cabinets that have a clear interior zone at or above that height, so projects with taller toe kicks or interior obstructions can be evaluated against this requirement during design.

The frame finish in Carbon Steel Gray makes this kit visually appropriate in cabinets that use similar-toned hinges or drawer slides, supporting projects where the interior hardware is expected to share a coordinated gray appearance.

Details That Support Repeatable Blind Corner Results

This COR Flex Planero blind corner kit is unhanded, so the same product can be used in left or right blind corner layouts, simplifying ordering and inventory because a single kit serves both cabinet orientations on the job site.

The integrated soft-closing and self-closing on both pull-outs control the final part of the tray travel, which helps the trays return fully into position without manual pushing, reducing the chance that fronts remain slightly open.

The weight rating of 17 lb per shelf defines the maximum load per tray, so installers and designers can size contents to stay within that rating, helping preserve slide performance when the trays are filled with stored items.

The installation template attribute, described as no measuring necessary when installing into the cabinet, means hole and frame locations are guided by the template, which supports consistent positioning across multiple units and reduces layout variability between installers.

The tray bottoms, available in Carbon Steel Gray and Walnut, provide options for interior styling, letting projects align tray color with cabinet interiors so the blind corner organizer looks integrated rather than appearing as a mismatched insert.

The combination of a Carbon Steel Gray frame and the selected tray bottom finish establishes a defined interior hardware aesthetic, which can be coordinated with other Vauth-Sagel components when a project standardizes on a particular interior color scheme.

Key Questions About COR Flex Planero Blind Corner Kit

Choose COR Flex Planero For Organized Blind Corners

The Vauth-Sagel COR Flex Planero blind corner kit with four trays, soft-closing and self-closing pull-outs, and a Carbon Steel Gray frame turns a 17-1/2 inch opening blind corner cabinet into structured storage that operates within defined depth, height, and load ratings.

When projects call for a blind corner pull-out using a 21-5/8 inch minimum depth and 20-1/3 inch minimum height, this unhanded organizer provides four tray levels with Carbon Steel Gray or Walnut tray bottoms to align function and appearance.