Vauth-Sagel COR Flex Scalea 15" Opening 4 Tray Blind Corner Kit with Soft-close Slides in Maple, BOMCORFLEXSC15MPL

Vauth-Sagel COR Flex Scalea Blind Corner Kit

Vauth-Sagel COR Flex Scalea blind corner kit organizes a blind corner cabinet by using a 4-tray pull-out system, so the hard-to-reach space turns into accessible storage that can be pulled out smoothly instead of staying dead space.

The COR Flex Scalea 15 inch opening design matches cabinet openings that accept a 15 inch opening blind corner layout, so the trays move through the opening without binding, which helps the pull-outs operate cleanly in everyday use.

This 4 tray blind corner organizer maple version uses trays with a maple finish on the bottoms, so the storage surface has a warm wood look that blends with many cabinet interiors while still working within the same frame system as other finishes.

The product sits in the blind corner organizers class within kitchen and bath cabinet accessories, so it is built specifically for blind corner pull-outs rather than general shelving, which keeps the motion and clearances focused on this cabinet application.

The kit uses integrated soft-closing and self-closing on both pull-outs, so each movement pulls in smoothly and finishes closed without slamming, which reduces impact on the cabinet structure and keeps stored items steadier as the trays return.

Key Blind Corner Organizer Details For Daily Use

• The minimum installation depth of 21-5/8 inches defines how deep the cabinet interior must be, so once that depth is present the pull-out frame and trays can travel fully without the back of the mechanism hitting the cabinet wall.
• The minimum installation height of 20-1/3 inches sets the vertical clearance requirement, so when the cabinet opening and interior height meet this number, the 4-tray stack fits without the upper tray rubbing the top or the lower tray dragging the bottom.
• The unhanded installation design means the same blind corner organizer kit can be mounted for either left or right blind corners, so installers do not need separate part numbers for cabinet runs that mirror each other on a project.
• The frame finish in carbon steel gray protects the structural components while presenting a neutral appearance, so the mechanism looks consistent inside modern cabinet interiors and the metal frame supports the trays through repeated pull-outs.
• The tray bottom finish in maple provides a light wood tone surface on each tray, so stored items rest on a visually warm platform that coordinates with maple cabinet interiors or contrasts cleanly against darker cases.
• The 17 lb per shelf weight rating sets the loading limit for each tray, so when stored items stay within that rating the trays move on the soft-close slides without overloading the runners or stressing the frame.

Installation Dimensions And Slide Function Details

The minimum installation depth of 21-5/8 inches determines how far back the cabinet must extend, so when that depth exists the frame and slides can mount flush at the front and still retract fully within the blind area.

The minimum installation height of 20-1/3 inches also governs vertical layout, so the four trays can stack with proper spacing between them, which helps items stand upright on each level without scraping the underside of the tray above.

The unhanded installation layout allows the frame and slide mechanism to be positioned on either side of a blind corner opening, so a single Vauth-Sagel COR Flex Scalea blind corner kit serves both left and right installations on a job.

The integrated soft-closing and self-closing on both pull-outs use the same slide mechanism that is supplied with the frame, so the trays glide out to present storage and then pull themselves closed, which supports consistent motion from cabinet to cabinet.

Using This COR Flex Scalea In Blind Corner Runs

Where The Vauth-Sagel Blind Corner Kit Fits

This blind corner organizer kit belongs in kitchen and bath cabinet accessories under blind corner pull-outs, so it is aimed at blind base cabinets where a portion of the space is concealed behind an adjacent cabinet and otherwise hard to use.

The COR Flex Scalea 15 inch opening specification ties the mechanism to cabinet openings built for a 15 inch front, so when a run of cabinets uses that opening width the trays are proportioned to travel through the face frame or front edge without catching.

The minimum installation depth of 21-5/8 inches maps directly to standard base cabinet depths, so when a base cabinet meets or exceeds that dimension, the frame can sit against the side panel inside the blind space while still allowing full extension of both pull-outs.

The minimum installation height of 20-1/3 inches positions this organizer in base cabinets that offer enough interior clearance above the bottom, so installers can place the frame at a working height that leaves hand room above each tray level for loading and unloading items.

The frame finish in carbon steel gray suits the interior of many contemporary cabinet lines, so it visually recedes against darker casework while still presenting a finished look when trays are pulled out in front of the door opening.

The tray bottom finish options listed as carbon steel gray, walnut, and maple describe the appearance of tray surfaces, and this maple version uses the maple tray bottom look so the visible shelves present a light, furniture-style interior when extended.

Why These Organizer Details Support Consistent Results

The unhanded installation feature means one Vauth-Sagel blind corner organizer kit handles either left or right blind layouts, so planning and stocking for larger jobs simplifies because the same manufacturer part BOMCORFLEXSC15MPL serves mirrored cabinet corners.

The integrated soft-closing and self-closing on both pull-outs control the last segment of travel, so each tray set retracts steadily and lands in a consistent closed position, which supports alignment with adjacent fronts and helps reduce door adjustments over time.

The 17 lb per shelf weight rating defines how heavily each tray can be loaded, so layout decisions for stored items such as cookware or pantry goods can be based on that limit, helping the soft-close slides operate within their design range.

The carbon steel gray frame finish protects the structural members of the pull-out mechanism, so daily cycles of loading, unloading, and sliding do not leave raw metal exposed inside the cabinet, which supports long-term visual consistency across an installation.

The maple tray bottom finish on this version sets the contact surface under stored items, so any marks from normal use show on a light, wood-toned background that many customers prefer in kitchen interiors, and the finish helps visually separate items on each level.

The product class listing as blind corner organizers clarifies that this unit is designed around blind corner traffic patterns, so the sequence of pull-outs is engineered for this cabinet type, which supports predictable movement when multiple cabinets in a run use the same system.

Common COR Flex Scalea Blind Corner Questions

Selecting This Blind Corner Kit For Your Project

The Vauth-Sagel COR Flex Scalea blind corner kit with 4 maple-finished trays, carbon steel gray frame, and integrated soft-closing and self-closing on both pull-outs suits blind base cabinets meeting the 21-5/8 inch depth and 20-1/3 inch height requirements, so it is ready to organize a 15 inch opening blind corner layout on your next kitchen or bath cabinet project.