Vauth-Sagel COR Flex Scalea 17-1/2" Opening 4 Tray Blind Corner Kit with Soft-close Slides in Maple, BOMCORFLEXSC17MPL

Carbon Steel Gray and Maple Trays That Unlock a Blind Corner Cabinet

The Vauth-Sagel COR Flex Scalea blind corner kit brings four pull-out trays to a corner cabinet that would otherwise waste most of its depth, delivering stored goods to the front of the cabinet in a smooth, controlled motion.

Key Features

• Four maple-finished trays on carbon steel gray frames extend in sequence to clear the cabinet corner and bring contents forward.
• Soft-close slides slow and control the closing motion so the tray set returns quietly every time.
• Non-handed design installs in a left- or right-hand corner without selecting a specific orientation at the time of order.
• 17-1/2 inch minimum cabinet opening width fits a standard blind corner base cabinet; also requires a minimum depth of 21-5/8 inches and a minimum height of 20-1/3 inches.
• 21 pound weight capacity handles a typical load of pantry goods, small appliances, or cleaning supplies across the four trays.
• Metal construction with maple wood trays keeps the frame rigid while the tray surfaces carry the natural warmth of maple.

Putting a Blind Corner to Work

Blind corner cabinets sit where two runs of cabinetry meet at a corner, and the geometry means a large section of cabinet depth is blocked from direct access by the adjacent cabinet box. Contents pushed to the back stay there. The COR Flex Scalea addresses that with a sequential tray system: the first tray clears the corner opening, and the remaining trays follow in a staggered pull, so a single motion draws the full stack into the open. The result is a corner that earns its square footage instead of storing things that never come back out.

Frame Finish, Tray Material, and Motion

The carbon steel gray metal frame holds four maple-faced trays. The two-material combination keeps the hardware visually receded while the tray surfaces present a wood tone that reads naturally in a kitchen with maple cabinetry or lighter wood interiors. The soft-close slide mechanism handles the return: as the trays are pushed back, the damped close takes over for the last portion of travel, preventing slamming on a loaded tray set. Because the unit is non-handed, the same SKU serves both corner orientations without special ordering.

Where This Kit Fits Best

This organizer is the right choice for a face-frame or frameless base cabinet where the blind corner pocket has gone unused or become a catch-all for things no one can find. Cabinet shops specifying a kitchen with a corner run will find the non-handed design reduces SKU complexity at the planning stage. Designers working with maple or light-wood kitchens will find the maple tray surface integrates cleanly with the cabinetry. Homeowners retrofitting an existing corner cabinet can add the system to a cabinet that already has the required opening. Confirm the cabinet's clear width, depth, and interior height against the minimum opening dimensions before ordering.

Common Questions

A Corner Cabinet That Actually Delivers

Choose the COR Flex Scalea to convert a blind corner from dead storage into four accessible, soft-closing tray levels, finished in maple and carbon steel gray to suit a kitchen where wood tones are already doing the work.