Vauth-Sagel COR Flex Scalea 17-1/2" Opening 4 Tray Blind Corner Kit with Soft-close Slides in Walnut, BOMCORFLEXSC17WNT

Vauth-Sagel COR Flex Scalea Blind Corner Kit

Vauth-Sagel COR Flex Scalea blind corner kit is a 4-tray blind corner organizer designed to turn a blind cabinet space into accessible storage using a guided frame and trays. The 17-1/2 inch opening specification defines the cabinet opening size the kit is engineered around, which helps plan where this organizer fits into a run. The product sits in the Blind Corner Organizers class, so it is built specifically for corner base cabinets where part of the cabinet is hard to reach. The frame uses soft-close slides, so the pull-outs close in a controlled way, which reduces slamming at the end of travel. The trays use a walnut tray bottom finish option, giving a wood-look interior surface that visually upgrades the cabinet interior. The system is sold as a kit, which means the frame and trays are designed to work together inside the stated size range.

Blind Corner Organizer Details That Support Use

• The minimum installation depth of 21-5/8 inch sets how deep the cabinet interior must be, so the frame and sliding motion operate without binding at the back.
• The minimum installation height of 20-1/3 inch establishes the vertical space requirement, so the full stack of 4 trays can move without interference from shelves or obstructions.
• The unhanded installation design means the same kit works on either cabinet side, which simplifies layout decisions during a project with multiple blind corners.
• The integrated soft-closing and self-closing on both pull-outs manage the final travel of the trays, which reduces impact on the cabinet and helps keep tray positions consistent.
• The 17 lb per shelf weight rating defines what each tray is intended to carry, which guides how much load can be placed on the organizer in everyday kitchen or bath use.
• The frame finish in Carbon Steel Gray provides a neutral, modern-looking structure, which blends with many cabinet interiors while supporting the moving components.

Installation Dimensions And Layout Workflow

The COR Flex Scalea 17-1/2 inch opening requirement ties directly into the cabinet front calculation, which affects how the door and front framing are designed around this organizer. The minimum installation depth of 21-5/8 inch lets installers plan base cabinet depth and any rear obstructions so the slide path stays clear. The minimum installation height of 20-1/3 inch defines how tall the interior cavity must be, which helps decide shelf placement or removal before fitting the frame. The unhanded installation feature reduces layout complexity, because the same setup works on either left or right blind corners without separate part numbers. The installation template described as no measuring necessary when installing into cabinet streamlines positioning, because the frame location is guided directly during install.

Using This COR Flex Scalea Blind Corner Organizer

Where This 4 Tray Blind Corner Kit Fits Best

This blind corner organizer is part of the Kitchen & Bath Cabinet Accessories category, so it is oriented toward kitchen and bath base cabinets with blind corner sections. The 17-1/2 inch opening description points it toward cabinets that can provide that clear front width, which influences face-frame or frameless design choices. The minimum installation depth of 21-5/8 inch aligns it with standard-depth base cabinets that provide enough interior room behind the face. The minimum installation height of 20-1/3 inch fits many base cabinet interiors where a full-height cavity is available, which suits lower cabinet compartments more than shallow drawers. The 4-tray construction gives four storage levels within the same footprint, which concentrates storage into a blind corner zone that would otherwise be difficult to reach. The tray bottom finish option in walnut provides a warm interior look, which can complement wood-toned cabinet fronts and create a consistent appearance when the trays are extended.

Details That Support Repeatable Blind Corner Results

The integrated soft-closing and self-closing function on both pull-outs manages the last portion of the slide travel, which helps the trays return to a consistent home position after every use and reduces shock loads to the frame. The 17 lb per shelf weight rating offers a clear load guideline for each tray, which helps plan what types of items are stored on each level to stay within the designed capacity. The frame finish in Carbon Steel Gray gives a defined structural surface that can handle daily movement, which supports long-term sliding performance when used within its ratings. The tray bottom finish options in Carbon Steel Gray, Walnut, and Maple allow the visual side of the installation to align with different cabinet interiors, which matters when the trays are opened frequently in busy kitchens or baths. The manufacturer part number BOMCORFLEXSC17WNT ties this specific 4-tray, walnut-bottom configuration to catalog and project documentation, which helps keep reorders and matching components consistent across a job.

Common COR Flex Scalea Blind Corner Questions

Selecting This COR Flex Scalea Kit For Your Project

The Vauth-Sagel COR Flex Scalea blind corner kit pairs a 17-1/2 inch opening design with a minimum 21-5/8 inch depth and 20-1/3 inch height, which clearly defines the cabinet envelope it suits. The 4-tray layout, 17 lb per shelf rating, and integrated soft-closing and self-closing on both pull-outs align this organizer with everyday kitchen or bath storage tasks. The combination of a Carbon Steel Gray frame and tray bottom options in Carbon Steel Gray, Walnut, and Maple lets the system match different cabinet styles while staying within a single part family under BOMCORFLEXSC17WNT.