Dynabrade DynaCut Extreme sanding disc is a 3 inch, 100 grit hook and loop aluminum oxide disc designed for coated abrasive sanding where fast cut and long life are important. The premium P graded aluminum oxide abrasives provide a fast cut, so stock removal moves quickly while still controlling scratch pattern for finishing stages. The disc uses a high performance 3 mil film backing that is extremely tough and tear resistant, which helps the disc stay intact under edge contact and higher pressure, reducing disc failure in the middle of a job. This film backing also generates the finest finishes, so you can move from leveling to pre-finish sanding without unnecessary grit steps. A proprietary clog free coating is pigment free and provides a build-up resistant abrasive surface, which keeps the disc cutting instead of loading, especially when sanding materials that tend to gum up abrasives.
The hook and loop attachment system makes disc changes quick and easy, so switching discs between grits or swapping out a worn disc takes minimal time at the sander. Because discs can be saved for future use when not completely worn, partially used grits stay in rotation for spot work without wasting remaining abrasive life. An Extreme vacuum hole pattern directs sanding dust and sanding debris to center extraction holes where vacuum draw is the greatest, which helps move dust off the work surface while sanding. The 3 inch disc size paired with this vacuum hole pattern supports controlled sanding in smaller areas while improving dust movement toward extraction.
This 3 inch, 100 grit aluminum oxide on film sanding disc fits sanding tasks that need an intermediate cut with controlled scratch before finer grits. The abrasive is manufactured as coated abrasives with premium P graded aluminum oxide, supporting consistent performance on repeated passes. As part of the Abrasives and Abrasive Discs category, it is suited to general sanding workflows where a 3 inch disc format is preferred for control. The 3 mil film backing is extremely tough and tear resistant, which supports use on profiles, edges, and smaller faces without the disc breaking down prematurely. The pigment free, clog free coating and build-up resistant abrasive surface help when sanding materials that can load a disc, because the surface stays more open for cutting. The Extreme vacuum hole pattern is designed to direct sanding dust and sanding debris to center extraction holes where vacuum draw is the greatest, so dust collection setups can pull more material off the workpiece as you sand.
The premium P graded aluminum oxide abrasives provide fast cut and long life, which supports consistent removal rates from disc to disc in a job run. Because the same construction generates the finest finishes, the 100 grit disc can contribute to smooth surfaces that transition predictably to higher grits. The extremely tough, tear resistant high performance 3 mil film backing resists tearing under pressure, which keeps the disc flat and stable on the pad, improving tracking marks and reducing random failures. The proprietary clog free coating is pigment free and provides a build-up resistant abrasive surface, so the cutting points stay exposed longer, keeping the scratch pattern more uniform over the life of the disc. The Extreme vacuum hole pattern focuses sanding dust and sanding debris toward the center extraction holes, helping vacuums work at their highest draw location to clear the sanding path. With the hook and loop attachment system, discs can be swapped quickly while remaining discs that are not completely worn can be saved for future use, which supports organized disc management and consistent sanding results across multiple work sessions.
The Dynabrade DynaCut Extreme disc is a coated abrasive disc using premium P graded aluminum oxide for fast cut and long life, supporting sanding where efficient stock removal and extended disc life are needed.
The 3 mil film backing is extremely tough and tear resistant, helping the disc stay intact under pressure and generating the finest finishes for smooth, even sanding results.
The proprietary clog free coating is pigment free and build-up resistant, helping the abrasive surface resist loading so the disc keeps cutting effectively over more passes.
The Extreme vacuum hole pattern directs sanding dust and sanding debris to center extraction holes where vacuum draw is greatest, improving dust movement off the work surface.
The hook and loop attachment system makes disc changes quick and easy, and allows discs that are not completely worn to be removed and saved for future use.
The Dynabrade 79853 disc is a 3 inch, 100 grit aluminum oxide on film sanding disc, suited to intermediate sanding where moderate material removal and controlled scratch are needed.
This Dynabrade DynaCut Extreme 3 inch, 100 grit hook and loop aluminum oxide on film sanding disc combines premium P graded aluminum oxide, a high performance 3 mil film backing, a proprietary clog free coating, and an Extreme vacuum hole pattern to support fast cut, extended disc life, and improved dust movement. Sold in packs of 50, it suits shops and installers who need a consistent 3 inch abrasive disc for repeated sanding tasks. Use this disc where controlled intermediate sanding and efficient dust extraction are central to your workflow.
Sold In: 1 Package