Dynabrade DynaCut Extreme sanding disc is a 3 inch 320 grit hook and loop aluminum oxide on film sanding disc designed for controlled, fine sanding where surface quality matters. The premium P graded aluminum oxide abrasive is engineered for fast cut, so material removes efficiently while still holding a consistent scratch pattern on the workpiece. The 3 mil film backing is extremely tough and tear resistant, so the disc stays intact under edge pressure and during extended runs. That same high performance film backing helps generate the finest finishes, which supports uniform stain or coating appearance on finished parts. The film backing also delivers up to 4X the life of paper discs, reducing abrasive changeovers during a shift. The hook and loop attachment system allows quick disc changes, helping workers move between grits without interrupting workflow. Discs can be saved for future use when not completely worn, which helps stretch abrasive budgets on repeat jobs.
The 6-hole aluminum oxide on film sanding disc features an Extreme vacuum hole pattern that directs sanding dust and debris toward the center extraction holes, where vacuum draw is the greatest. This focused dust movement keeps the abrasive surface clearer, which helps the disc maintain its cut rate and consistent finish over longer cycles. The clog free coating is pigment free and provides a build-up resistant abrasive surface, so loading from fine dust is reduced in use. That resistance to build-up further extends disc life on dust-prone materials. The hook and loop attachment system holds firmly during sanding yet releases cleanly, so operators can change discs quickly without damaging the backing pad surface or wrestling with stuck abrasives.
This 3 inch 320 grit hook and loop aluminum oxide on film sanding disc fits abrasive disc workflows that demand fine surface preparation in a compact footprint. The premium P graded aluminum oxide abrasive is suited to removing previous sanding marks while leaving a tight, uniform scratch that supports even finishing. The extremely tough and tear resistant 3 mil film backing works well when operators sand near edges or contours, because the backing resists tearing when part geometry changes. The Extreme vacuum hole pattern directs sanding dust and debris to center extraction holes, so connected vacuum systems can clear dust effectively at the highest draw point. That dust movement helps keep the abrasive cutting rather than skating on packed dust. The proprietary clog free coating is pigment free and build-up resistant, which matters when sanding light-colored materials where surface contamination and swirl from loaded discs can be an issue. Together, these details make the disc suitable for jobs that need repeatable fine finishes across multiple parts.
The high performance 3 mil film backing generates the finest finishes and extends disc life up to 4X compared to paper discs, so crews can stay on a single disc through longer sanding runs without quality drift. That durability helps maintain consistent scratch depth from part to part, reducing the chance of visible transitions in clear or semi-transparent finishes. The proprietary clog free coating maintains a cleaner abrasive surface, so operators spend less time clearing loaded discs and more time achieving the required finish. Because the coating is pigment free, there is no added color transfer from the disc, which supports clean results on light materials or high-visibility surfaces. The hook and loop attachment system makes disc changes quick and easy, allowing fast progression through grit sequences when dialing in a finish. Being able to save discs for future use when not completely worn lets teams return to a partially used 320 grit disc that already matches a specific material response, supporting consistent results on repeat jobs.
The Dynabrade DynaCut Extreme sanding disc uses premium P graded aluminum oxide abrasive, which supports fast cut while maintaining a controlled scratch pattern on fine sanding work.
The 3 mil film backing is extremely tough and tear resistant, so the disc stays intact under pressure and generates the finest finishes with up to 4X the life of paper discs.
The Extreme vacuum hole pattern directs sanding dust and debris to center extraction holes, where vacuum draw is greatest, helping keep the abrasive surface clearer during use.
The proprietary clog free coating is pigment free and build-up resistant, so dust loading is reduced and the disc maintains cut rate and finish quality longer on the job.
This 3 inch 320 grit sanding disc uses a hook and loop attachment system, allowing quick disc changes and reliable grip during sanding operations.
This sanding disc is designed so discs can be saved for future use when not completely worn, supporting reuse on similar materials and reducing abrasive waste.
The Dynabrade DynaCut Extreme 3 inch 320 grit hook and loop 6-hole aluminum oxide on film sanding disc combines premium P graded aluminum oxide, a 3 mil film backing, an Extreme vacuum hole pattern, and a clog free coating to support fine, repeatable finishes with extended disc life. When a workflow calls for compact, controlled sanding with strong dust handling and quick disc changes, this disc provides the construction details needed to hold finish quality from part to part. Use it wherever a 3 inch, 320 grit, film backed disc with vacuum-friendly design fits your established abrasive process.
Sold In: 1 Package