Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme 3 inch sanding disc is a 180 grit hook and loop abrasive disc built for fast cut and long life, so each disc stays productive longer in regular sanding work. The disc uses premium P graded aluminum oxide abrasives, which deliver consistent cutting action across the surface, helping produce predictable finishes from disc to disc. An extremely tough and tear resistant high performance 3 mil film backing supports aggressive sanding without failing prematurely, which matters when pushing harder on edges or corners. The disc is made as a 3 inch diameter piece, fitting sanders designed for that size so contact stays focused on tight areas and smaller faces. With its 6-hole design described as a vacuum hole pattern directing sanding dust and sanding debris to center extraction holes where vacuum draw is the greatest, the disc works with vacuum sanders to move dust away from the work area during operation.
This Dynabrade DynaCut Extreme 3 inch 180 grit hook and loop disc uses a hook and loop attachment system, so it mounts to compatible hook and loop backup pads by pressing the disc onto the pad surface. That attachment method allows quick disc removal when switching abrasives, which is useful when moving between different grit steps during finishing sequences. The 3 inch size focuses cutting action into a relatively compact sanding footprint, which suits work where control around profiles, edges, or smaller panels is important. A 6-hole Extreme vacuum hole pattern routes sanding dust and sanding debris toward center extraction holes where vacuum draw is the greatest, which works with vacuum-capable sanders to move dust through the pad instead of across the work. The 3 mil film backing stays flat on the pad, helping the abrasive maintain full contact and even pressure against the surface.
This Dynabrade DynaCut Extreme aluminum oxide on film sanding disc is specified at 3 inches in diameter, so it targets work where a compact disc is preferred over larger pads, such as furniture parts, small cabinet components, or localized repairs. The 180 grit rating positions the disc in a medium-fine range, where it can refine prior coarse sanding scratches and prepare surfaces for finer grits or intermediate finishing steps. Premium P graded aluminum oxide abrasives are manufactured for fast cut and long life, which allows the disc to remove material efficiently while still holding up across repeated passes. Because the abrasive is bonded to an extremely tough and tear resistant high performance 3 mil film backing, the disc can track around profiles and edges while resisting tearing, which helps maintain a consistent scratch pattern instead of creating random damage from backing failure. The proprietary clog free coating is pigment free and provides a build-up resistant abrasive surface, which is useful when sanding materials where dust can load quickly, as the open surface helps keep the cutting points exposed.
The Extreme vacuum hole pattern on this Dynabrade 3 inch disc is designed to direct sanding dust and sanding debris to center extraction holes where vacuum draw is the greatest, so dust is moved toward the strongest airflow path instead of lingering between the disc and workpiece. That routing supports more efficient dust collection on suitable vacuum-ready tools, which in turn helps the abrasive stay cleaner and maintain cutting ability over a longer span of use. The hook and loop attachment system makes disc changes quick and easy, because the disc can be pulled from the backup pad and pressed back into place without tools, supporting rapid grit changes during staged sanding processes. Since discs can be saved for future use when not completely worn, partially used 180 grit discs can be removed after a job and reapplied later, which makes better use of remaining abrasive life and reduces waste. With its combination of 3 mil film backing, P graded aluminum oxide, clog free coating, and dust-directing vacuum hole pattern, the disc is configured to generate the finest finishes and up to 4X the life of paper discs while supporting efficient, repeatable sanding workflow.
This Dynabrade DynaCut Extreme disc uses premium P graded aluminum oxide abrasives, which deliver fast cut and long life for consistent sanding performance across multiple passes.
The 3 mil film backing is extremely tough and tear resistant, generating the finest finishes and up to 4X the life of paper discs during repeated sanding tasks.
The proprietary clog free coating is pigment free and build-up resistant, helping the abrasive stay open longer so cutting performance and disc life are extended.
The Extreme vacuum hole pattern directs sanding dust and sanding debris to center extraction holes where vacuum draw is the greatest, improving dust removal at the sanding interface.
This DynaCut Extreme disc uses a hook and loop attachment system, so discs are pressed onto or pulled from compatible pads for quick and easy changes between sanding steps.
This Dynabrade disc can be saved for future use when not completely worn, allowing remaining abrasive life to be used on later sanding tasks.
The Dynabrade DynaCut Extreme 3 inch 180 grit hook and loop 6-hole aluminum oxide on film sanding disc combines premium P graded aluminum oxide abrasives, an extremely tough 3 mil film backing, and a proprietary clog free coating to support demanding sanding routines. Its Extreme vacuum hole pattern directs sanding dust and sanding debris to center extraction holes where vacuum draw is the greatest, while the hook and loop attachment system makes disc changes quick and easy and lets usable discs be saved for future use. For operations needing a compact 3 inch disc with fast cut, long life, and strong dust management, this configuration is built to keep sanding work moving efficiently.
Sold In: 1 Package