Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme 5 inch sanding disc describes a 5 inch abrasive disc from Dynabrade that is built for sanding tasks where fast cut and long life matter on the job. The disc is manufactured with premium P graded aluminum oxide abrasives, which provide a fast cut so material removal keeps pace with each pass. That same P graded aluminum oxide also supports long life, allowing installers and woodworkers to stay at the tool longer before changing discs. The disc uses an aluminum oxide abrasive on a film backing, giving a consistent cutting surface that helps maintain even finishes across panels or parts. This disc is rated at 80 grit, which delivers an aggressive enough scratch pattern for shaping or intermediate sanding while still leaving a surface that can be refined with finer steps. The scalloped edge sanding disc shape supports edge work by presenting a contoured edge as it tracks along profiles.
The hook and loop attachment system on this disc allows it to connect to a matching hook and loop backing pad, so mounting is done by pressing the disc into place rather than aligning a pressure-sensitive adhesive. Because the hook and loop interface is reusable, the disc can be removed and repositioned when grit changes are needed, helping maintain pad alignment on the tool. The 5 inch diameter sizing matches setups built around that disc size, so the sanding area is predictable as the disc sweeps across a panel or face frame. The no hole configuration keeps the full disc surface in play for contact, which matters where sanding coverage and consistent scratch are more critical than vacuum flow patterns through the disc face.
This aluminum oxide on film scalloped edge sanding disc is built around premium P graded aluminum oxide abrasives, so cutting performance stays strong as the disc moves over wood or similar materials during cabinet and woodworking operations. The scalloped edge sanding disc outline gives a series of small arcs around the perimeter, which helps the edge of the disc track along contours or transitions without presenting a hard circular edge. That contour-friendly edge geometry is useful on shaped parts where uniform contact around the profile is important to the final appearance. The 80 grit rating provides a balance between stock removal and surface preparation, so it can be used to level surfaces or remove marks while leaving a scratch pattern that transitions well to finer grits. The no hole layout keeps abrasive across the entire 5 inch face, which supports even contact across the pad when the tool is run flat to the work surface.
The extremely tough and tear resistant high performance 3 mil film backing under this disc generates the finest finishes by holding the P graded aluminum oxide in a stable layer, so the abrasive stays flat and consistent as it wears. That same 3 mil film backing is engineered to deliver up to 4X the life of paper discs, which means fewer disc changes during extended sanding runs. A proprietary clog free coating that is pigment free creates a build-up resistant abrasive surface, helping the disc shed dust and swarf instead of loading, so the cutting surface remains open longer into the disc life. Because that coating is pigment free, it avoids adding coloring agents at the abrasive face, which matters when the appearance of the sanded substrate must stay true. The hook and loop attachment system supports quick disc changes and allows discs to be saved for future use when not completely worn, so installers can pull a partially used 80 grit disc back into service for touch-ups or matching scratch patterns on follow-up work.
The Dynabrade DynaCut Extreme 5 inch sanding disc uses premium P graded aluminum oxide abrasives, giving fast cut and long life during sanding passes.
The 3 mil film backing is extremely tough and tear resistant, generating the finest finishes and providing up to 4X the life of paper discs for extended use.
This aluminum oxide on film scalloped edge sanding disc is 80 grit, supporting aggressive material removal while preparing the surface for finer sanding steps.
The proprietary clog free coating is pigment free and creates a build-up resistant surface, so the disc resists loading and maintains cutting efficiency longer.
The no hole design provides uninterrupted abrasive coverage across the 5 inch disc face, supporting consistent contact and scratch pattern across the work area.
The hook and loop attachment makes disc changes quick and easy and allows partially worn discs to be removed and saved for future use on matching tasks.
This Dynabrade DynaCut Extreme 5 inch hook and loop no hole aluminum oxide on film scalloped edge sanding disc with 80 grit and premium P graded aluminum oxide abrasives supports fast cut, fine finishes, and extended disc life. The extremely tough and tear resistant high performance 3 mil film backing and proprietary clog free coating work together to keep the abrasive cutting longer with fewer interruptions. The hook and loop attachment system makes disc changes quick and easy and allows discs to be saved for future use when not completely worn, supporting efficient use across multiple sanding stages.
Sold In: 1 Package