Dynabrade DynaCut Extreme 5 inch sanding disc uses premium P graded aluminum oxide abrasive, so each disc cuts aggressively while staying consistent across the surface, which helps produce predictable finishes job after job. The 320 grit rating positions this disc for fine sanding and finish prep, giving cabinet and woodworking projects a smooth surface ready for the next step. An aluminum oxide on film construction combines sharp abrasive grains with a stable base, so the disc resists wear while keeping the cut uniform. The scalloped edge design allows the disc to feather more gently at the perimeter, which helps blend edges and reduces visible swirl marks along profiles and transitions. This disc is part of the Dynabrade DynaCut Extreme line, giving installers and shop users an abrasive option aimed at fast cut and long life on compatible hook and loop backing pads.
The 5 inch 320 grit hook and loop sanding disc uses a hook and loop attachment system, so it mounts directly to compatible hook and loop backing pads without tools, supporting quick swaps between steps. This system lets installers move from aggressive sanding to finer finishing simply by lifting one disc and pressing on another, which keeps the sander in hand and production moving. The no hole layout gives a full abrasive face across the disc, so the entire surface contributes to material removal and finish refinement where vacuum extraction patterns are not required. With aluminum oxide on film construction and a scalloped edge, the disc stays flat across the pad while the perimeter flexes more gently, which helps maintain contact in corners, along edges, and over profiles.
The aluminum oxide on film sanding disc uses an extremely tough and tear resistant high performance 3 mil film backing, so it stays stable during extended passes across panels and frames. That backing supports the premium P graded aluminum oxide abrasive, which is specified for fast cut and long life, so the same disc can move across multiple components while still delivering a fine 320 grit scratch pattern. The scalloped edge shape lets the outer edge flex slightly around contours and along inside corners, which helps reduce sharp edge lines and improves blending where flat discs can leave visible transitions. The proprietary clog free coating being pigment free and build-up resistant keeps sanding dust from bonding heavily to the surface, so the abrasive grains remain exposed longer and feel more consistent through the life of the disc.
The DynaCut Extreme designation identifies this disc as part of a high performance line built for fast cut and long life, so shops can use it where throughput and repeatable finishing are important. Because the premium P graded aluminum oxide abrasive is uniform, the 320 grit disc leaves a controlled scratch pattern that prepares wood or similar materials for later finishing steps without deep random scratches. The extremely tough and tear resistant high performance 3 mil film backing keeps the disc intact around the scalloped edge, so operators can work close to edges without the disc fraying prematurely. The proprietary clog free, pigment free coating keeps dust from building up into hard spots on the disc, which helps avoid streaks and uneven cutting across the workpiece. The hook and loop attachment system supports quick disc changes and allows saving partially used discs, which helps installers and fabricators organize their abrasives by remaining life and grit.
This Dynabrade DynaCut Extreme disc is manufactured with premium P graded aluminum oxide abrasives, so it delivers a fast, consistent cut and maintains performance across repeated sanding passes.
The extremely tough and tear resistant high performance 3 mil film backing supports the abrasive, so the disc resists tearing and keeps a uniform surface under pressure and along edges.
The proprietary clog free, pigment free coating creates a build-up resistant surface, so dust does not load heavily on the disc and cutting action stays effective longer.
The hook and loop attachment system lets the disc attach and detach quickly, so changing grits or reusing partially worn discs fits smoothly into normal sanding workflow.
The scalloped edge on this sanding disc allows the perimeter to feather more gently, so transitions along edges and contours can be blended more smoothly.
This Dynabrade DynaCut Extreme sanding disc is 5 inches in diameter and 320 grit, so it suits fine sanding and finish preparation tasks where a smooth surface is needed.
The Dynabrade DynaCut Extreme 5 inch 320 grit hook and loop sanding disc pairs a premium P graded aluminum oxide abrasive with an extremely tough and tear resistant high performance 3 mil film backing, so it supports fast cut and long life on fine sanding tasks. A proprietary clog free, pigment free coating reduces build-up on the abrasive surface, which helps maintain cutting efficiency over more workpieces. The scalloped edge and no hole design work with hook and loop mounting to give installers and woodworkers a flexible disc that handles edges, profiles, and flat areas with consistent results.
Sold In: 1 Package