
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Dynabrade Extreme 220 Grit sanding sheet is a 3 x 4 aluminum oxide abrasive sheet on a film backing designed for fast cutting under light pressure. The extremely sharp and friable P-graded aluminum oxide abrasive cuts quickly while shedding worn grain, so material removal stays consistent across the life of the sheet. The film backing supports the abrasive layer during use, helping the sheet maintain a predictable cutting face on each pass. This sheet uses a hook and loop attachment interface, so it connects to matching pads without tools and releases cleanly when it is time to change grits or swap out worn pieces. The 220 grit grade suits tasks where controlled stock removal and a finer finish are required in the same step. The Dynabrade brand positioning in abrasive sheets focuses this product for professional and serious shop workflows.
This 3 x 4 hook and loop sanding sheet is built to mount on hook and loop pads through its premium loop scrim laminated to foam, so the sheet anchors firmly while sanding yet pulls away cleanly when changed. The film-backed aluminum oxide construction keeps the abrasive layer stable during use, so the sheet tracks true while moving over edges or flat runs. The orange urethane foam under the loop scrim adds support between pad and abrasive, which helps the grain stay engaged with the work surface across both flats and minor variations. Because the abrasive is P-graded and friable, it refreshes the cutting edges as it fractures, so the mounted sheet continues to cut and finish in a predictable way from start to finish.
This Dynabrade aluminum oxide sanding sheet in 220 grit is positioned for workflows that demand fast cutting under light pressure with a consistent finish. The 3 x 4 size suits tools and pads designed around that footprint, so the abrasive covers the expected contact area during sanding passes. The film backing under the P-graded aluminum oxide helps the sheet run smoothly over surfaces, supporting the grain while it fractures and renews its cutting points. The orange urethane foam bonded to the loop scrim lets the sheet conform to uneven surfaces, so it can follow slight curves, edges, and transitions instead of riding only on high spots. That combination of film backing, friable abrasive, and foam support lets the sheet address both shaping and finish-level refinement at 220 grit on the same workpiece.
The extremely sharp, friable P-graded aluminum oxide abrasive is engineered to break down in a controlled way, which continually exposes fresh cutting edges, so the sheet maintains removal rates and finish quality over its service life. This behavior reduces the tendency for the surface to gloss over before the grit rating would suggest, supporting consistent results from one area of a panel to the next. The proprietary orange urethane foam is tuned to provide enough firmness for the grain to engage fully, while still flexing to support the abrasive across contours, helping avoid isolated high-pressure spots that can gouge. Premium loop scrim laminated to the foam forms a stable hook and loop connection, so sheet movement stays tied to the pad without slippage during sanding strokes. Together, these construction choices support repeatable sanding passes that combine control, coverage on uneven areas, and a uniform 220 grit finish.
The sanding sheet uses extremely sharp, friable P-graded aluminum oxide abrasive, so it cuts quickly under light pressure and continues to renew cutting edges as the grain fractures.
The premium loop scrim laminated to the foam connects to hook and loop pads, so the sheet mounts securely for sanding and detaches smoothly when changing sheets or switching grits.
The proprietary orange urethane foam provides the correct firmness for the abrasive grain to cut while flexing enough to support the sheet over uneven surfaces and contours.
The foam-backed design allows the product to conform to uneven surfaces, so the abrasive maintains contact across dips, profiles, and transitions instead of only on high spots.
The P-graded aluminum oxide abrasive supports consistent material removal and finish throughout the life of the product, so panels and parts match from section to section.
The film backing supports the aluminum oxide abrasive layer, helping the sheet keep a stable, predictable cutting surface at 220 grit during both shaping and finishing passes.
This Dynabrade Extreme 220 Grit sanding sheet combines P-graded aluminum oxide on a film backing with an orange urethane foam and hook and loop attachment, so it supports fast cutting, conformity to uneven surfaces, and quick pad changes in professional sanding workflows.
Sold In: 1 Package