Dynabrade Extreme 320 grit sanding sheet uses an extremely sharp, friable P-graded aluminum oxide abrasive that delivers fast cutting action under light pressure, so material removes efficiently without leaning on the tool, helping control heat and surface quality. The abrasive is bonded on a film backing, which keeps the grit support stable as you work, supporting a consistent scratch pattern from the first part to the last. Its 320 grit rating targets fine sanding and finishing, so surfaces are prepared for subsequent steps in a controlled, predictable way. The sheet measures 3 inches by 4 inches, fitting sanders and pads designed for that footprint, which helps concentrate cutting action in tight or detailed areas. The design is a no hole, hook and loop style, so the face stays solid for uniform contact while still attaching quickly to compatible hook pads.
The 3 inch by 4 inch format places the Dynabrade sheet squarely on hook and loop pads sized for that footprint, creating full-face support so the film and abrasive stay flat during fine sanding. Premium loop scrim laminated to the foam engages directly with hook and loop pads, allowing quick attachment when stepping through 320 grit stages and easy removal when the sheet is spent. The no hole layout keeps the working surface intact, so the abrasive engages the substrate evenly in each stroke. The combination of film backing and urethane foam support lets the sheet conform to slight surface variations while still holding the grit in a controlled plane, which supports even pressure and helps maintain a uniform scratch pattern during finishing work.
The P-graded aluminum oxide abrasive on this sheet is designed to cut fast under light pressure, which suits operations where constant hand force is not practical over many parts. At 320 grit, the sheet supports fine sanding that prepares surfaces for later finishing or coating, bringing down minor high spots while leaving a refined texture. The film backing stabilizes the abrasive while the proprietary orange urethane foam provides the correct firmness, so the sheet can work flat on planar surfaces yet flex to follow uneven or contoured areas. That combination lets a user move between edges, profiles, and flats without changing to a different style of abrasive for each small transition. The 3 inch by 4 inch size helps target smaller areas or detailed zones that benefit from a controlled contact patch.
The friable P-graded aluminum oxide grain fractures during use to keep fresh, sharp cutting points at the surface, which maintains a steady cut rate and finish level instead of glazing over. Because this grain is extremely sharp and designed for use under light pressure, a user can let the abrasive do the work, helping reduce unwanted deep scratches that come from heavy-handed passes. The film backing carries the abrasive in a thin, uniform layer, contributing to a consistent scratch pattern that can be repeated across multiple pieces in a production run. The orange urethane foam underlayer balances firmness and flexibility, pressing the grit into high spots while still conforming to dips, which helps avoid isolated pressure points and promotes a more uniform surface. Premium loop scrim laminated to the foam allows repeat attachment to hook and loop pads without damaging the backing, supporting multiple sheet changes during extended sanding sessions.
The sheet uses extremely sharp, friable P-graded aluminum oxide, which delivers fast cutting under light pressure and maintains a consistent finish as the grain fractures during sanding.
The aluminum oxide is applied on a film backing, giving a stable base that helps hold the grit pattern and supports even surface contact for predictable finishing results.
The proprietary orange urethane foam provides the correct firmness for cutting while still allowing flexibility, so the sheet can conform to uneven surfaces during fine sanding.
A premium loop scrim laminated to the foam attaches to hook and loop pads, allowing fast sheet changes and clean removal when moving through 320 grit stages.
The 3 inch by 4 inch size matches pads designed for that footprint, focusing the abrasive on smaller or detailed areas where controlled sanding is required.
The no hole design keeps the abrasive face continuous, providing uninterrupted contact on the work surface when vacuum extraction through the sheet is not needed.
Dynabrade Extreme 320 grit sanding sheet combines P-graded aluminum oxide on a film backing with orange urethane foam support and a premium hook and loop scrim, giving controlled cutting, conformity on uneven surfaces, and quick changes between sanding steps. For buyers needing a 3 inch by 4 inch, no hole, hook and loop film-backed option at 320 grit, this sheet aligns well with fine sanding and finishing workflows. Choose this Dynabrade sheet when a stable film base, light-pressure fast cut, and consistent surface results are priorities in everyday abrasive work.
Sold In: 1 Package