ABRASIVE SHEET, 150 GRIT describes this Dynabrade Dynacut 150 grit PSA silicon carbide sanding sheet that creates a thinner scratch than aluminum oxide, so sanding leaves a finer pattern that is easier to refine between steps on wood or similar materials. The silicon carbide grain cuts faster than aluminum oxide, which removes material quickly during light deburring and scouring when you need to clean up an edge or surface without excessive pressure. The sheet uses silicon carbide on film, so the abrasive is bonded to a film backing that supports consistent cutting action across the 3-1/2 inch (89 mm) width and 2-3/4 inch (70 mm) length. The no hole PSA back lets the sheet adhere over its full area, which helps maintain even contact when used on appropriate sanding blocks or flat fixtures.
The 150 grit rating defines this sheet as a medium-fine abrasive, which balances cutting speed and surface refinement for light deburring and scouring where a smooth finish is needed. The 3-1/2 inch (89 mm) width and 2-3/4 inch (70 mm) length let the sheet sit neatly on appropriately sized sanding blocks or pads, so the abrasive area stays supported during strokes. The PSA backing adheres the sheet to a suitable flat support, which keeps the silicon carbide on film layer from shifting as it cuts, so edges track straight and surfaces stay uniform through repeated passes.
This Dynabrade Dynacut 150 grit no hole PSA silicon carbide on film sanding sheet is specified for light deburring and scouring, so it serves detail clean-up and surface preparation tasks where controlled removal is essential. Because the silicon carbide grain creates a thinner scratch than aluminum oxide, it leaves a more refined pattern that supports follow-up sanding or finishing operations without deep grooves. The 3-1/2 inch (89 mm) width lets you focus on smaller faces and edges, so it fits well in operations that address trim pieces, narrow parts, or localized repair zones. The 2-3/4 inch (70 mm) length keeps the abrasive area compact, which helps operators move around contours or tight sections while still keeping the sheet fully supported on an appropriate block or pad.
The combination of silicon carbide on film and 150 grit means this Dynabrade sheet cuts faster than aluminum oxide while producing a thinner scratch, so each stroke removes material efficiently yet leaves a surface that needs fewer additional passes to refine. The no hole PSA design places adhesive across the back, so the sheet maintains close contact with the mounting surface, which helps the abrasive track flat and reduce uneven spots that can appear when loose sheets shift. The defined size of 3-1/2 inch (89 mm) by 2-3/4 inch (70 mm) means the working area is predictable, allowing setups that align edges and corners to the sheet dimensions for repeatable results. In light deburring and scouring work, these combined traits support consistent, repeatable surface quality from one part to the next.
The Dynabrade Dynacut 93131 sanding sheet uses silicon carbide grain on film, which cuts faster than aluminum oxide and creates a thinner scratch pattern for smoother follow-up finishing.
The 150 grit on this abrasive sheet provides a medium-fine cut that suits light deburring and scouring, leaving a surface that transitions efficiently to finer grits or finishing steps.
The Dynabrade Dynacut 93131 sheet measures 3-1/2 inch (89 mm) wide by 2-3/4 inch (70 mm) long, giving a compact abrasive area for focused sanding tasks on smaller surfaces.
The PSA backing on this sanding sheet adheres it to a suitable support surface, keeping the silicon carbide on film stable so the 150 grit cuts evenly across each pass.
This abrasive sheet is suited for light deburring and scouring tasks where silicon carbide's faster cut removes small burrs or residue while the 150 grit maintains a reasonably smooth surface.
On this Dynabrade sheet, silicon carbide cuts faster than aluminum oxide and produces a thinner scratch, which supports efficient material removal with a finer surface profile.
This Dynabrade Dynacut 150 grit no hole PSA silicon carbide on film sanding sheet combines a medium-fine 150 grit cut with silicon carbide grain that creates a thinner scratch than aluminum oxide, giving controlled removal and a smoother pattern for ongoing work. Its 3-1/2 inch (89 mm) width and 2-3/4 inch (70 mm) length provide a compact abrasive area that suits focused light deburring and scouring operations. Choose this ABRASIVE SHEET, 150 GRIT when a fast-cutting silicon carbide sheet on film backing with PSA adhesion aligns with your sanding and clean-up tasks.
Sold In: 50 Each