Dynabrade DynaCut 120 grit sanding sheet is a 3/4 x 2 inch aluminum oxide abrasive designed for controlled material removal, so finish work on wood, metal, and other substrates can stay consistent across multiple parts. The sheet uses premium P grade aluminum oxide, which cuts sharply on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, helping bring surfaces to a uniform scratch pattern before finishing. Its 120 grit rating balances stock removal with surface refinement, making it useful between aggressive shaping and final finishing steps where predictable scratch depth matters. The abrasive is built as a coated abrasive sheet, so the grain distribution stays even across the working area, supporting repeatable results when sanding multiple edges or small surfaces. This format suits shop workflows that rely on small strips for focused sanding rather than full-size sheets.
This DynaCut 120 grit PSA strip is a no-hole sanding sheet on C weight paper, so the entire 3/4 x 2 inch surface can be used for contact on flat or slightly contoured workpieces. The durable paper backing resists tearing, supporting firm hand pressure when leveling filled areas or cleaning edges on fabricated metals. Moderate flexibility in the backing allows the sheet to conform along profiles or around small radii, which helps keep the scratch pattern even when sanding trim or shaped components. As a coated abrasive on P grade aluminum oxide, the sheet delivers a sharp, controlled cut that supports blending tool marks and preparing primed or painted surfaces for subsequent coats on many shop materials.
This Dynabrade aluminum oxide sanding sheet is designed for use on a broad range of shop materials, so it can cover multiple tasks without frequent abrasive changes. On hard and soft woods, the P grade aluminum oxide grain cuts sharply, which helps flatten joints, smooth profiles, and prepare surfaces for stain or clear finishes. When used on plastics and fiberglass, the free cutting action supports shaping and edge cleanup while helping manage heat buildup by maintaining an open cutting surface. On composites and fabricated metals, the 120 grit texture provides enough bite to remove minor imperfections and blend transitions while leaving a surface that is ready for finer grits or coating prep. The 3/4 x 2 inch strip format works well wherever access is limited, such as narrow faces, inside corners reachable by a strip, or edges that benefit from a controlled contact area. The non contaminating, non-loading coating is particularly useful with soft materials and coatings, because it resists clogging and keeps the cutting face active as sanding progresses.
The combination of 120 grit, P grade aluminum oxide, and C weight paper backing shapes how this sheet behaves in real use. The 120 grit level gives a medium cut that removes tool marks and surface irregularities while leaving a manageable scratch pattern for subsequent finishing steps, reducing rework between grit changes. The P grade aluminum oxide grain is engineered to stay sharp and free cutting on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, so each stroke continues to remove material efficiently across mixed-material builds. The C weight paper backing resists tearing yet stays moderately flexible, which allows firm pressure on flat surfaces without premature sheet failure and still lets the strip follow gentle contours or rounded edges. The non contaminating, non-loading coating resists clogging when sanding soft materials and coatings, helping the abrasive maintain its cut rate and extending usable life on tasks like leveling primed or painted surfaces, solid surface materials, and softer substrates. Together, these details support a consistent sanding workflow and predictable surface readiness for downstream finishing stages.
The sanding sheet works on hard and soft woods, plastics, fiberglass, composites, fabricated metals, aluminum, solid surface materials, and primed or painted surfaces, so one abrasive handles many common shop materials.
The P grade aluminum oxide grain is sharp and free cutting on a broad range of materials, helping remove material efficiently while producing a consistent scratch pattern across different substrates.
The C weight paper backing resists tearing yet remains moderately flexible, allowing firm pressure on flat work and controlled sanding on edges and gentle contours.
The non-loading coating resists clogging when sanding soft materials and coatings, which keeps the abrasive cutting effectively and supports a longer working life for each strip.
The 120 grit rating provides medium cutting action, bridging between coarser shaping grits and finer finishing grits, so surfaces are leveled while remaining ready for further refinement.
The 3/4 x 2 inch strip format focuses the abrasive on small areas, enabling precise work on edges, narrow parts, and tight spots where larger sheets would be harder to control.
The Dynabrade DynaCut 120 grit no hole PSA aluminum oxide sanding sheet in a 3/4 x 2 inch format brings P grade aluminum oxide, C weight paper backing, and a non loading coating together for controlled material removal. This combination supports work on hard and soft woods, plastics, fiberglass, composites, fabricated metals, aluminum, solid surface materials, and primed or painted surfaces, so a single abrasive style can handle varied shop jobs. Selecting this strip helps maintain a consistent scratch pattern, efficient cut, and manageable workflow when sanding edges, narrow faces, or small components.
Sold In: 1 Package