Dynabrade DynaCut 240 grit sanding sheet is a 3/4 x 2 inch aluminum oxide abrasive on C-weight paper that levels, smooths, and refines surfaces where a compact, controlled sanding area is needed. The premium P grade aluminum oxide grain is sharp and free cutting on hard and soft woods, plastics, fiberglass, composites, and fabricated metals, so one strip handles mixed-material assemblies without constant changes. The 240 grit cut refines scratches and prepares primed or painted surfaces for subsequent coats, helping create a consistent finish. A pressure sensitive adhesive (PSA) backing secures the sheet firmly to compatible sanding tools or blocks, which keeps the abrasive stable during work and supports precise edge or profile sanding. The no hole design presents a full abrasive face to the workpiece, maximizing contact on narrow parts and tight spots.
This DynaCut 3/4 x 2 PSA sanding strip uses a pressure sensitive adhesive backing that bonds to compatible sanding blocks, tools, or fixtures, keeping the abrasive flat and controlled against the work. The no hole construction leaves the full face covered with aluminum oxide on C-weight paper, so every part of the strip contributes to the cut on narrow workpieces. The durable backing resists tearing as the strip is peeled from a support surface, helping retain a clean edge for repositioning. Because the abrasive is designed for hard and soft woods, plastics, fiberglass, composites, fabricated metals, aluminum, solid surface materials, and primed or painted surfaces, the same strip can be used through different steps on assemblies that combine these materials.
The Dynabrade DynaCut 240 grit no hole PSA aluminum oxide sanding sheet is intended for work on hard and soft woods, plastics, fiberglass, composites, fabricated metals, aluminum, solid surface materials, and primed or painted surfaces, so it suits cabinet, furniture, and general fabrication environments handling these substrates. The 3/4 x 2 inch format focuses cutting into tight areas such as narrow frames, molding details, or localized repair zones, letting users refine surfaces without disturbing surrounding finished areas. Its non-contaminating, non-loading coating resists clogging when sanding soft materials and coatings, which is valuable when working on painted parts or solid surface edges where fine dust can quickly load lesser abrasives. Because the C weight paper backing is both durable and moderately flexible, the sheet can move from flat face work to lightly profiled surfaces without breaking down prematurely.
The premium P grade aluminum oxide grain used on this sheet is sharp and free cutting across wood, plastics, fiberglass, composites, and fabricated metals, which helps maintain a consistent scratch pattern as material changes within a single project. The pressure sensitive adhesive backing holds the 3/4 x 2 inch strip firmly on sanding blocks or tools, supporting accurate control on edges and keeping the abrasive from shifting during passes. The C weight paper backing resists tearing, so the abrasive surface stays intact under hand pressure or repeated strokes, which reduces interruptions from sheet failure. The non-contaminating, non-loading coating keeps the abrasive open longer when sanding soft materials and coatings, allowing more usable life from each strip and promoting uniform finish quality across multiple parts. Together, these details help deliver predictable sanding performance from initial smoothing through preparation of primed or painted surfaces.
The Dynabrade DynaCut 240 grit sanding sheet is designed for hard and soft woods, plastics, fiberglass, composites, fabricated metals, aluminum, solid surface materials, and primed or painted surfaces, so it covers typical shop substrates.
The C weight paper backing on this sheet resists tearing yet stays moderately flexible, so it withstands pressure during sanding while still conforming to gentle curves and edges.
The pressure sensitive adhesive backing lets the sheet bond to compatible sanding blocks or tools, holding the 3/4 x 2 inch abrasive securely so it stays flat and controlled during work.
The 240 grit aluminum oxide cut refines surfaces and scratch patterns on primed or painted parts, preparing them for additional coats while managing material removal.
The non-loading coating resists clogging when sanding soft materials and coatings, so the abrasive surface stays open longer and the disc life increases between changes.
The 3/4 x 2 inch size concentrates the abrasive on a narrow area, allowing precise sanding of edges, profiles, corners, and localized repairs without affecting nearby surfaces.
The Dynabrade DynaCut 240 grit sanding sheet combines premium P grade aluminum oxide, a durable yet flexible C weight paper backing, and a no hole PSA design to support targeted work on wood, metal, aluminum, composites, solid surface, and primed or painted parts. The 3/4 x 2 inch format works well where access is tight or controlled material removal matters. For shops that handle mixed materials and need consistent surface preparation with reduced clogging on softer substrates, this DynaCut strip offers a focused abrasive option for daily sanding tasks.
Sold In: 1 Package