1/4" Female Coupler with 1/4" Male Plug Assembly

Dynabrade 1/4 Inch Female Coupler Purpose

Dynabrade 1/4 inch female coupler with 1/4 inch male plug assembly is an air line fitting designed to connect air tools and hoses using a matched coupler and plug combination. The assembly pairs a 1/4 inch female coupler with a 1/4 inch male plug, so installers can transition between components that share this common air line size. This air line fitting sits in the Air Line Components and Air Line Fittings classes, so it is built for compressed air service rather than fluid lines. The parts are supplied as a single Dynabrade 95676 assembly, which keeps the connection style consistent across both sides of the joint. As a Dynabrade product, the assembly aligns with Dynabrade air systems where their couplers and plugs are specified.

Key Air Line Details That Support Daily Use

• The assembly uses a 1/4 inch female coupler mated to a 1/4 inch male plug, creating a matched connection that simplifies selecting air line endpoints for tools or manifolds using the same nominal size.
• An air flow range up to 74 SCFM allows the assembly to handle typical air consumption of many shop tools within that flow rate, helping maintain delivery volume through the connection point.
• A maximum working pressure of 150 PSIG, equivalent to 10 Bar, sets the operating limit for this fitting so it can be matched to shop air systems running within that pressure level.
• A temperature range from -4 F to 212 F, or -20 C to 100 C, defines the environmental window where the coupler and plug are intended to operate, supporting use in both cooler and warmer shop conditions.
• The note to only use Dynabrade couplers with Dynabrade plugs means this assembly is configured for Dynabrade mating geometry, supporting consistent engagement between the female coupler and male plug.

Air Line Fitting Size And Connection Details

The 1/4 inch female coupler provides a standard small-format air line interface, so it can serve as the receiving side for 1/4 inch plug terminations in a compressed air layout. The 1/4 inch male plug portion provides the projecting side of the connection, so it can be engaged into appropriate 1/4 inch female couplers built to Dynabrade geometry. The combined coupler and plug assembly organizes both connection ends around this 1/4 inch sizing, which supports consistent air line routing when multiple drops or tools share that dimension. Because the product is classified as an air line fitting, it is intended to participate directly in the pressurized air circuit.

Where This Dynabrade Air Line Assembly Fits

Using The Coupler And Plug In Air Systems

The Dynabrade 1/4 inch female coupler with 1/4 inch male plug assembly functions as a connection point within an air system built around 1/4 inch lines. The female coupler side is arranged to receive compatible 1/4 inch male plugs, allowing quick connection at that node while maintaining the defined air path. The male plug side is shaped to engage into a Dynabrade 1/4 inch female coupler, completing the connection at another point in the system using matching geometry. With an air flow capacity up to 74 SCFM, this assembly supports air delivery for tools and equipment whose draw falls within that range, so the fitting does not become the limiting restriction in typical shop applications. The 150 PSIG maximum working pressure allows the assembly to sit in lines supplied by compressors regulated within that value, integrating into many general compressed air distributions that operate at or below that pressure limit. The temperature range of -4 F to 212 F supports applications where the air line may be exposed to cooler ambient air or warmer machine-adjacent conditions, maintaining performance within that environmental band.

Why The Verified Ratings Matter For Consistency

The defined 74 SCFM air flow range gives installers a clear sense of how this assembly fits into the overall air system capacity, so the connection can be placed on branches that match its flow capability. The 150 PSIG or 10 Bar maximum working pressure rating provides a hard upper limit for system pressure at this point, helping maintain a uniform pressure standard when pairing this fitting with regulators and other components bearing similar ratings. The broad temperature range from -4 F to 212 F helps the assembly remain suitable for typical indoor shop climates and moderate thermal variation, supporting repeatable sealing performance across regular operating conditions. The instruction to only use Dynabrade couplers with Dynabrade plugs means this coupler and plug assembly is dimensioned as a matching set, which promotes consistent engagement forces and sealing behavior each time the joint is connected. Because both pieces are supplied under the Dynabrade 95676 identifier, technicians can match future connections or replacements by referencing this part number, which streamlines ordering and promotes uniformity across multiple air drops.

Common Questions About Dynabrade 95676 Air Fitting

Selecting This 1/4 Inch Air Coupler Plug Combo

The 1/4 inch air coupler plug combo from Dynabrade, part number 95676, offers a matched 1/4 inch female coupler and 1/4 inch male plug with a defined 74 SCFM air flow capacity, 150 PSIG maximum working pressure, and -4 F to 212 F temperature range. These verified ratings allow installers to place the assembly into air circuits operating within those limits, coordinating with other Dynabrade couplers and plugs where that system standard is in use. For projects calling for a 1/4 inch Dynabrade air line fitting built around these parameters, this assembly provides a straightforward connection point.