1/4" Male Coupler with 1/4" Female Plug Assembly

1/4 Inch Male Coupler For Controlled Airflow

1/4 inch male coupler with 1/4 inch female plug assembly from Dynabrade provides fingertip flow control on an air line, giving installers a quick way to regulate air to Extreme Dynorbital Sanders during sanding work. The Dynabrade air line fittings design matches the needs of users running X51, X61 and X62 Extreme Dynorbital Sanders, so the connector plays a specific role in that tool setup. The fingertip flow control air line connector allows the user to adjust air delivery directly at the connection point, which helps tailor tool performance to the sanding task. The coupler thread size of 1/4 inch male NPT and plug thread size of 1/4 inch female NPT establish a predictable interface for routing air lines in a shop. The 95851 air line coupler part number identifies this specific Dynabrade assembly for repeat ordering and standardization across workstations.

Key Air Line Connector Details For Daily Use

• The fingertip flow control air line connector design lets the user regulate air supply at the connector, helping match Extreme Dynorbital Sander response to different sanding materials and pressures without changing upstream settings.
• The coupler thread size of 1/4 inch male NPT fits air line layouts built around that thread standard, supporting straightforward integration into existing manifolds or drop lines where 1/4 inch male NPT is already used.
• The plug thread size of 1/4 inch female NPT accepts 1/4 inch male NPT mating parts, so installers can connect this assembly where a female NPT interface is required at the plug end in the air circuit.
• Up to 74 SCFM air flow capacity allows the air line connector to pass substantial air volume, which supports the demands of Extreme Dynorbital Sanders X51, X61 and X62 during sustained sanding tasks.
• The chrome plated brass construction provides a metal body for the connector, giving the fitting a solid feel and a surface suited to regular coupling and uncoupling in a busy sanding or finishing area.

Threaded Air Line Connection And Assembly Fit

The 1/4 inch male NPT coupler thread on this Dynabrade air line fitting ties into systems that already use 1/4 inch NPT threads, which simplifies planning air drops and connections around Extreme Dynorbital Sanders. The 1/4 inch female NPT plug thread receives a matching 1/4 inch male NPT fitting, helping keep the direction of flow and connection sequence consistent at the sander side. As a fingertip flow control air line connector, this assembly positions the adjustment right at the coupler and plug, so the operator can change airflow while holding the hose rather than walking back to a regulator. The defined thread sizes and flow control function work together to support a repeatable layout when multiple Dynabrade sanders share the same air header.

Using This Connector With Dynorbital Sanders

Air Line Connector Role With Extreme Dynorbital Sanders

This fingertip flow control air line connector is described for use with Extreme Dynorbital Sanders X51, X61 and X62, so it serves as the link between the air line and these sanding tools. By using a coupler thread size of 1/4 inch male NPT, the fitting seats into air circuits designed around that thread, which is often used on drops feeding handheld pneumatic tools. The plug thread size of 1/4 inch female NPT then accepts a 1/4 inch male NPT fitting that can be positioned toward the sander, aligning the connector with common hose-end configurations. The stated air flow of up to 74 SCFM provides capacity for these Extreme Dynorbital Sanders to run under load, helping the tools maintain their sanding performance as air demand increases during continuous operation.

Details That Support Repeatable Airflow And Setup

The 1/4 inch male coupler with 1/4 inch female plug assembly format gives installers a consistent pattern to follow when standardizing air connections at multiple sanding stations, which can simplify setup changes when tools are moved. Because the Dynabrade air line fittings are specified as a fingertip flow control air line connector, the adjustment point becomes predictable along the hose, helping operators quickly find and set airflow when switching between fine finishing and more aggressive sanding passes. The chrome plated brass body offers a defined material choice, supporting repeated connection cycles under normal shop handling. With a single manufacturer part number, 95851, the assembly can be referenced whenever the same airflow characteristics and thread interfaces are needed on additional Extreme Dynorbital X51, X61 or X62 setups.

Common Questions About This Dynabrade Air Connector

Selecting This Coupler Assembly For Dynabrade Use

The 1/4 inch male coupler with 1/4 inch female plug assembly from Dynabrade combines fingertip flow control, 1/4 inch male NPT and 1/4 inch female NPT threads, and up to 74 SCFM air flow in one defined part. For shops running Extreme Dynorbital Sanders X51, X61 and X62, those details align this connector with the airflow and interface needs of the tools. When a consistent Dynabrade air line fittings arrangement is required across stations, using the 95851 assembly helps keep thread sizes, flow capacity and control points aligned to the same standard.