2" Diameter x 28" High Rockwell Table Leg Set, Brushed Steel, 4/Set

Rockwell Table Leg Set For Stable Work Surfaces

Rockwell table leg set from Peter Meier, Inc. is a 2 inch diameter x 28 inch high brushed steel leg system designed for work surfaces and tables. The 2 inch diameter tubular design supports work loads while keeping a slim profile, which helps when space around the perimeter of the table is tight. The 28 inch height targets standard table and work surface projects, so tops land in a familiar working range once fastened to the mounting plates. The brushed steel finish keeps the look consistent across multiple legs, which matters when installing several tables in the same room or matching existing brushed hardware. As a table leg set in the Work Surface & Tables category, it fits straightforward table builds where a clean underside and open access under the top are important on the job.

Key Rockwell Table Leg Details For Projects

• The 2 inch diameter leg body provides a compact footprint that leaves more knee and cart clearance under the table, which helps in tight shop, office, or residential layouts.
• The 28 inch high dimension sets a base height that works for many table and work surface designs, reducing layout time when repeating standard-height installations across multiple rooms.
• The 1-1/8 inch adjustable foot allows height fine-tuning at the floor, which helps compensate for uneven surfaces and aligns adjoining tops so joints stay flush.
• The 220 lb weight capacity per leg supports substantial static loads at each corner, which matters when setting heavy tops or equipment and aiming to limit leg deflection.
• The brushed steel finish coordinates with other brushed metal components, helping create a consistent appearance on visible table bases in offices, retail areas, or workrooms.
• The Rockwell design is described as stylish and affordable, supporting projects where appearance and budget both factor into selecting table legs.

Mounting And Adjustment For Rockwell Table Legs

This Rockwell table leg set uses a mounting plate with an M10 threaded bolt connection to attach each leg to the underside of the work surface. The M10 threaded bolt provides a defined mechanical interface between leg and plate, which helps keep the joint tight during normal use. The 1-1/8 inch adjustable foot at the bottom of each leg extends or retracts to trim finished height, letting installers match a target dimension even when flooring varies across a run of tables. With 28 inch high legs in a matched set, layout is predictable from one table to the next, so repeated installations follow the same drilling and positioning pattern.

Using Rockwell Legs In Work Surface Builds

Where This 2 Inch Rockwell Set Performs Best

This 2 inch diameter x 28 inch high Rockwell table leg set fits projects in the Work Surface & Tables category where open access underneath is a priority. The brushed steel finish suits office, retail, or residential environments where metal legs remain visible and need a consistent look along a row of stations. Because each leg is rated at 220 lb weight capacity, the set supports heavier tops in woodworking, light fabrication, or equipment-support roles within that capacity per leg. The defined 28 inch height streamlines design for standard-height tables, helping fabricators plan edge details, apron depths, and clearance without recalculating base height for each job.

Details That Support Level, Repeatable Installations

The mounting plate with M10 threaded bolt connection anchors each Rockwell leg to the underside of the top, giving a repeatable point layout for multiple tables using the same plate. Once the plate is positioned and fastened, the M10 interface centralizes the leg on the plate, which helps keep legs square to the surface and aligned from unit to unit. The 1-1/8 inch adjustable foot lets installers dial in final height from the floor, which corrects for slab irregularities and keeps banks of tables level with one another. With 220 lb capacity per leg, designers can account for predictable support at each corner when placing equipment or choosing top materials within that loading.

Common Questions About Rockwell Table Leg Set

Selecting This Rockwell Set For Your Next Build

The Rockwell table leg set pairs 2 inch diameter, 28 inch high brushed steel legs with a mounting plate and M10 threaded bolt interface, giving a defined way to support work surfaces. With 1-1/8 inch adjustable feet and 220 lb capacity per leg, it aligns with standard-height table projects where appearance, leveling, and rated support all matter. For work surfaces in shops, offices, or light-duty work areas, this Rockwell table leg set offers a consistent foundation for repeated builds.