
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rockwell table legs from Peter Meier, Inc. provide a 2-3/8 inch diameter x 28 inch high support leg in brushed steel, giving work surfaces and tables a clean, uniform look while matching common counter and desk heights in shop or office layouts. The Rockwell leg design is described as stylish and affordable, which keeps projects looking consistent across multiple stations while helping control overall job cost when specifying multiple legs. The brushed steel finish visually separates the leg from lighter tops and darker floors, helping installers orient layout lines and edge reveals more accurately during setup. Each leg is part of a system that is easy to install, which reduces layout time when you are drilling, positioning, and locking legs in place on repetitive builds or on-site adjustments. This specific configuration is identified by manufacturer part number 960-28-ST, tying it directly to the Rockwell family of 60mm table legs.
The Rockwell leg design is identified as easy to install, which supports straightforward mounting on work surfaces and tables when you are standardizing your fastening pattern. Each leg uses a 1-1/8 inch adjustable foot, which allows you to fine-tune final height and compensate for minor floor irregularities so the table stands solidly without rocking. The 220 lb weight capacity per leg defines the vertical load it can support, which helps you calculate total table capacity by multiplying per-leg rating by the number of legs used under a given top. Brushed steel construction integrates cleanly with metal mounting components, so leg alignment remains visually consistent when viewed from seated or standing positions around the table perimeter.
The 2-3/8 inch diameter x 28 inch high Rockwell leg format works wherever a standard-height table or work surface is needed, because the height pairs well with typical top thickness for seated or light standing tasks. Brushed steel finish lets the legs sit visually between light tops and darker floors, which is useful in offices, shops, or mixed-use spaces where hardware should be visible but not dominant. The Rockwell family is categorized under work surface and table legs, which places this model squarely in applications ranging from individual desks to multi-leg benches. The part number 960-28-ST maps directly to 60mm Rockwell table legs, which is important when matching additional legs to existing runs or designing modular layouts that may expand later.
The 1-1/8 inch adjustable foot built into each Rockwell leg provides a significant adjustment range, which helps you dial in level across uneven floors or between adjoining tops so edges line up cleanly. When multiple tables stand side by side, that adjustment range allows you to match height even if the subfloor varies slightly from one end of the room to the other. The 220 lb weight capacity per leg gives a predictable load rating, which simplifies planning for equipment placement because you can relate total supported weight to the number of legs under the top. The easy-to-install description means the interface between leg, top, and mounting components is straightforward, which supports consistent alignment when repeating the same pattern across a series of identical tables or production workstations.
The Rockwell table legs provide a 2-3/8 inch diameter x 28 inch high support with a 220 lb capacity per leg, which suits standard-height work surfaces that need predictable vertical load handling.
The 1-1/8 inch adjustable foot allows each Rockwell leg to be raised or lowered, which helps achieve a level top on floors that vary in height so the table sits stable.
The 220 lb weight capacity per leg defines the vertical load each Rockwell leg can carry, so total table capacity can be related to the number of legs supporting the top.
The 2-3/8 inch diameter (60mm) creates a robust support column, which spreads load over a wider area at the foot and gives the table a substantial visual profile.
The brushed steel finish gives the Rockwell table legs a neutral metallic look, which coordinates with many top materials and helps designs stay consistent across multiple tables.
The manufacturer part number 960-28-ST identifies this specific 60mm, 28 inch high Rockwell table leg configuration, which helps align new installations with existing Rockwell-based layouts.
The 2-3/8 inch diameter x 28 inch high Rockwell table legs in brushed steel combine a 1-1/8 inch adjustable foot with a 220 lb capacity per leg, giving work surfaces a defined load rating and on-site height adjustment. The easy-to-install Rockwell design helps standardize mounting across projects, which streamlines layout when repeating similar table sizes in multiple rooms or across large floor plans. With a clear product identity under part number 960-28-ST, these legs provide a direct way to specify or extend a consistent support system for desks, benches, or general work surfaces that match this format.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | CM960-28-71 Mfr# 960-28-71 | 2-3/8" Diameter x 28" High Rockwell Table Leg Set, Aluminum Silver, 4/Set | ||||
Sold in: 1 Set | CM960-28-02 Mfr# 960-28-02 | 2-3/8" Diameter x 28" High Rockwell Table Leg Set, Black Matte, 4/Set | ||||
Sold in: 1 Set | CM950-28-71 Mfr# 950-28-71 | 2" Diameter x 28" High Rockwell Table Leg Set, Aluminum Silver, 4/Set | ||||
Sold in: 1 Set | CM950-28-02 Mfr# 950-28-02 | 2" Diameter x 28" High Rockwell Table Leg Set, Black Matte, 4/Set | ||||
Sold in: 1 Set | CM950-28-ST Mfr# 950-28-ST | 2" Diameter x 28" High Rockwell Table Leg Set, Brushed Steel, 4/Set |