2-3/8" Diameter x 28" High Rockwell Table Leg Set, Stainless Steel, 4/Set

Rockwell Table Leg Set For Stable Work Surfaces

Rockwell table leg set describes a 4-leg kit designed to support work surfaces and tables using a consistent, matched geometry. The 2-3/8 inch diameter round leg profile distributes load over a broader footprint, which helps the installer create stable support on typical furniture-grade surfaces. The 28 inch high leg length positions a work surface at a traditional table height when combined with standard top thickness, which suits common residential and light commercial layouts. The stainless steel construction resists typical shop and residential moisture exposure, helping the legs maintain appearance and function over time. A 4-9/16 inch (116mm) square mounting plate provides a defined interface at each corner, which simplifies layout when fastening to the underside of a top. The 1-1/8 inch adjustable foot on each leg offers fine-tuning at floor level, allowing the installer to correct for minor floor irregularities.

Key Rockwell Leg Details That Support Builds

• The 2-3/8 inch diameter leg design presents a sturdy round profile that spreads vertical loads more evenly into the floor contact point, which supports a solid feel under normal table use.
• The 28 inch high leg length sets the structure close to standard table height once a typical top is mounted, which streamlines design decisions for work surfaces, desks, and tables using standard chair heights.
• The 1-1/8 inch adjustable foot at the bottom of each leg allows height micro-adjustment, which helps the installer level the work surface across uneven flooring or compensate for minor layout variances.
• The 4-9/16 inch (116mm) square mounting plate at the top of each leg establishes a clear fastening footprint, which aids repeatable positioning and improves alignment at each corner of the table or work surface.
• The stainless steel material provides a hard, corrosion-resistant exterior, which supports use in typical kitchen, office, or shop environments where occasional moisture or cleaning is expected.

Installation Details For Rockwell Leg Mounting

The 4-9/16 inch square mounting plate defines a stable attachment zone at each leg, which helps distribute loads into the table underside rather than concentrating stress at a single point. The plate size and square geometry make it easier to orient legs consistently when laying out multiple corners, which supports clean alignment during installation. The 1-1/8 inch adjustable foot operates as a built-in leveling feature, which reduces time spent chasing floor variance through shimming. By combining the 28 inch leg height with the adjustment range at the foot, the installer can fine-tune final work surface elevation within a narrow band, which is useful when matching adjacent surfaces at similar heights.

Using Rockwell 28 Inch Legs In Real Projects

Where These Stainless Rockwell Legs Perform Best

The 28 inch high Rockwell table legs in stainless steel fit projects that call for a standard table-height work surface, such as general work tables, utility benches, or desk-style layouts within the work surface and tables category. The 2-3/8 inch diameter supports these uses by providing a visually substantial column that handles typical loads associated with daily activity on a table or work surface. The stainless steel construction aligns well with settings where metal legs are exposed, because it presents a clean metallic appearance that coordinates with many laminate and surfacing materials. The 4-9/16 inch square mounting plate interfaces reliably with common substrate materials used in tabletops, so the same leg set can serve across multiple build types where that footprint is available.

Details That Keep Height And Alignment Consistent

The adjustable table leg set design built into this Rockwell product uses a 1-1/8 inch adjustable foot, which gives each leg its own fine-tuning mechanism at floor level. That adjustment range lets the installer dial in level across four corners even when the subfloor has minor high or low spots, which reduces rocking at the finished table. Because the manufactured leg height is 28 inches before adjustment, the change introduced at each foot remains relatively small, which helps the legs stay visually consistent while accommodating real-world floor variance. The square mounting plate further supports alignment by creating straight reference edges during layout, which helps keep legs parallel to table edges for a clean finished look. Together, the defined leg height, adjustable foot, and square plate geometry support repeatable installations from one project to the next.

Common Questions About Rockwell 28 Inch Leg Sets

Select Rockwell Table Leg Set For Your Build

The Rockwell table leg set from Peter Meier, Inc. combines 28 inch height, 2-3/8 inch diameter legs, stainless steel construction, a 4-9/16 inch square mounting plate, and a 1-1/8 inch adjustable foot, which together support stable, level work surfaces for table and workbench projects.