2-3/8" Diameter x 28" High Rockwell Table Leg Set, Aluminum Silver, 4/Set
Description
Rockwell Table Legs 60mm Silver For Work Surfaces
Rockwell table legs 60mm silver from Peter Meier, Inc. provide a 2-3/8 inch diameter support solution for work surfaces and tables, so you can design sturdy tops with a compact round footprint. The 28 inch high leg height creates a standard table-height work surface, which helps maintain a consistent run across multiple tables on the same project. The aluminum silver finish delivers a clean, neutral look that blends with common laminate and wood tones, supporting use in shops, offices, or residential spaces focused on function. Each Rockwell leg has a 1-1/8 inch adjustable foot, which allows fine tuning of height on uneven floors so the work surface sits level and does not rock during use. The leg design is described as stylish and affordable, which helps align the look of functional furniture while staying within project budgets.
Key Rockwell Leg Details That Support Projects
- The 2-3/8 inch diameter leg body concentrates strength into a compact circle, which leaves more clearance under the work surface for storage or seating while still providing solid vertical support.
- The 28 inch high leg size establishes a standard table-height structure, which lets installers match existing desk or table heights across a room without reworking surrounding cabinetry.
- The aluminum silver finish offers a neutral metallic appearance, which coordinates with typical hardware and edge treatments to keep the overall installation visually consistent.
- The Rockwell leg design is described as stylish and affordable, which allows use across multi-station projects where consistent appearance and cost control both matter.
- The configuration as a table leg set from Peter Meier, Inc. means all legs share the same height and finish, reducing layout time when aligning multiple corners or supports on a single top.
Table Leg Mounting And Height Adjustment Details
This Rockwell table leg set uses a mounting plate with an M10 threaded bolt, which gives the leg a defined mechanical connection point to the work surface for predictable load transfer. The 1-1/8 inch adjustable foot range allows vertical fine tuning at the floor, so installers can compensate for slab or subfloor variations while keeping the mounting plate fixed to the top. With a 220 lb weight capacity per leg, the system supports substantial loads when legs are placed at corners or along spans, helping tables resist deflection in daily use. The 60mm, or 2-3/8 inch, diameter works with the M10 connection and adjustable foot to keep loads centered along the leg axis, which helps stability when users apply force near the edges of the work surface.
Using Rockwell Table Legs In Real Projects
Where These Peter Meier Rockwell Legs Fit Best
The 2-3/8 inch diameter x 28 inch high Rockwell table leg set fits projects that call for standard-height tables, shop benches, and work surfaces where users sit or stand at conventional furniture height. The 60mm diameter gives enough bearing area at the floor while staying compact, so these legs work well at corners of rectangular tops, peninsula-style workstations, or freestanding utility tables. The aluminum silver finish suits environments that use metal-framed shelving, office furniture, or contemporary cabinet pulls, helping the legs visually blend into the hardware scheme. With a 220 lb weight capacity per leg, these Rockwell table legs support heavy work surfaces when arranged to carry loads at corners and along edges, making them appropriate for dense tops and equipment-bearing stations.
How Rockwell Details Support Repeatable Results
The M10 threaded bolt in the mounting plate provides a standardized connection for each Rockwell table leg, which promotes consistent leg alignment and simplifies repeating the same setup across multiple tops. The 28 inch high dimension, combined with the 1-1/8 inch adjustable foot, lets installers dial in a precise finished height while keeping an overall table-height target, so adjoining surfaces meet cleanly. The 220 lb capacity per leg offers a predictable load rating for layout calculations, allowing planners to locate legs at specific points under the work surface when distributing heavier equipment or dense materials. The 2-3/8 inch diameter profile pairs with the adjustable foot to keep the leg centered under the plate and steady at the floor, which supports long-term stability when tables are moved or repositioned inside a workspace.
Common Questions About Rockwell Table Leg Set 960-28-71
What are the key dimensions of this Rockwell table leg set?
The Rockwell table leg set has a 2-3/8 inch (60mm) diameter and a 28 inch high leg, which establishes a compact but stable footprint and a standard table-height work surface.
How does the adjustable Rockwell table leg foot help installation?
The Rockwell table leg set uses a 1-1/8 inch adjustable foot, allowing height fine tuning on uneven floors so the work surface can sit level and resist rocking during use.
What load can each Peter Meier Rockwell table leg support?
Each Rockwell table leg has a 220 lb weight capacity per leg, allowing planners to support substantial tops and equipment by positioning multiple legs under the work surface.
How do these 2-3/8 inch Rockwell legs attach to the work surface?
The Rockwell table leg set uses a mounting plate with an M10 threaded bolt, creating a defined mechanical connection between the leg and the work surface for stable support.
What finish is provided on the Rockwell 60mm table legs?
The Rockwell table leg set has an aluminum silver finish, giving a neutral metallic look that coordinates with many laminate, wood, and hardware colors in workspaces.
Which part number identifies this Rockwell table leg set?
This Rockwell table leg set is identified by manufacturer part number 960-28-71, which ties directly to the 2-3/8 inch diameter, 28 inch high, aluminum silver legs.
Select Rockwell Table Legs For Stable Work Surfaces
The 2-3/8 inch diameter x 28 inch high Rockwell table leg set from Peter Meier, Inc. combines a 60mm round profile, aluminum silver finish, and 1-1/8 inch adjustable foot to support stable, level work surfaces. With an M10 threaded mounting plate and 220 lb capacity per leg, this Rockwell table leg set suits projects needing repeatable dimensions and solid vertical support. Use the manufacturer part number 960-28-71 to align this leg set with work surface layouts that call for standard-height tables and a consistent metallic appearance.
