2-3/8" Diameter x 28" High Rockwell Table Leg Set, Chrome, 4/Set
Description
Rockwell Table Leg Set For Table Height Jobs
Rockwell table leg set describes a 2-3/8 inch diameter x 28 inch high table leg set in chrome that is built for table-height work surfaces where a consistent finished height is important. The 28 inch high Rockwell table legs from Peter Meier, Inc. establish a standard base height before top thickness, which helps plan finished working height on bench, office, or shop projects. The chrome finish on this Rockwell table leg set creates a smooth metal surface that suits applications where a clean, metal-look support is preferred. The manufacturer part number 960-28-C1 identifies this specific Rockwell leg set, which simplifies reordering when repeating layouts or matching existing installations. Being categorized under Work Surface & Tables as table legs clarifies that this Rockwell table leg set is intended as the primary vertical support under worktops, so layout and fastening can be planned around that role.
Key Rockwell Leg Details That Support Work
- The 2-3/8 inch (2.36 inch) diameter on these Rockwell table legs creates a relatively broad round support, which spreads load over a larger footprint at the floor and can feel more stable under typical table uses.
- The table, counter and bar heights available detail signals that this 28 inch version is the table-height option, which helps align different Rockwell leg heights across a project where multiple surface heights are designed.
- The 1 1/8 inch adjustable foot on each leg provides vertical adjustment at the base, which helps bring a work surface into level when floors vary slightly in height or have minor irregularities.
- The 4 9/16 inch (116 mm) square mounting plate at the top of each leg presents a defined fastening area against the underside of the top, which supports predictable screw pattern layout and load transfer.
- The chrome finish on this Rockwell leg set provides a bright metal appearance, which suits installations where exposed table legs are part of the finished look around work surfaces or tables.
Mounting And Height Setup For Rockwell Legs
The 4 9/16 inch square mounting plate on each Rockwell table leg defines the contact zone with the underside of the work surface, which gives a clear area for positioning each leg near corners or support points. That fixed plate size is useful when repeating hole patterns or positioning across several identical tables. The 1 1/8 inch adjustable foot under each Peter Meier Rockwell leg introduces vertical fine-tuning, which lets installers dial in small height changes relative to the 28 inch leg body. This combination of a fixed-height leg and an adjustable foot helps create a consistent working plane across a row of tables or stations even when floor flatness varies.
Using Rockwell Table Legs In Surface Layouts
Where Rockwell Table Leg Set Works Best
The 2-3/8 inch diameter x 28 inch high Rockwell table leg set is suited to applications where a table-height work surface is supported by four vertical legs, such as freestanding tables or work surfaces. The Work Surface & Tables classification highlights that these Rockwell table legs are intended to carry tops functioning as work areas rather than as decorative supports, so leg placement relates directly to load-bearing zones on the top. The 4 9/16 inch square mounting plate shape works well at corner or inboard support positions, because the square layout can align visually and structurally with rectangular tops. The chrome finish allows the Rockwell leg set to stand in visible locations without needing cladding, which fits projects where the leg is fully exposed under desks, counters, or shop tables.
Details That Help Repeatable Rockwell Installations
The consistent 28 inch leg height of this Peter Meier Rockwell leg set supports repeatable finished heights across multiple units, because each leg begins at the same starting length before applying the 1 1/8 inch adjustable foot. That fixed dimension simplifies cutting no structural members in the field for height, which can streamline layout when building runs of identical tables. The adjustable foot on each Rockwell leg adds controlled vertical travel, allowing installers to fine-tune the final height within the adjustment range rather than altering the leg body, which reduces rework if the floor varies from area to area. The 4 9/16 inch (116 mm) square mounting plate gives a known screw zone, so drilling and fastening patterns can be duplicated accurately on jigs or templates for multiple tops, supporting efficient shop or on-site production. The manufacturer designation 960-28-C1 ties these physical details to a single part number, which helps specifiers and buyers call out the same Rockwell leg set whenever a matched table-height support is needed on future projects.
Common Questions About Rockwell 960-28-C1 Legs
What height do the Rockwell 960-28-C1 table legs provide?
The Rockwell 960-28-C1 table legs are 28 inches high, so they establish a base table height before accounting for worktop thickness and any adjustment from the 1 1/8 inch foot.
How does the adjustable foot on these Rockwell legs help setup?
The Rockwell table legs have a 1 1/8 inch adjustable foot that lets installers fine-tune leg height, which helps level a work surface across areas where floor height varies slightly.
What does the 2-3/8 inch diameter on the legs mean in use?
The 2-3/8 inch diameter indicates a relatively wide round leg, which spreads the support area at the floor and can contribute to stable table performance under typical loads.
How does the 4 9/16 inch mounting plate affect installation?
The 4 9/16 inch square mounting plate provides a defined fastening zone against the tabletop, which simplifies screw placement and promotes consistent support locations on repeated builds.
What role does the chrome finish play on Rockwell table legs?
The chrome finish gives the Rockwell table legs a bright metal look, which suits visible installations where the leg appearance is part of the finished furniture or work area design.
How is this Peter Meier Rockwell leg set identified for reorders?
This Peter Meier, Inc. Rockwell leg set is identified by manufacturer part number 960-28-C1, which lets buyers specify the same 28 inch chrome legs in future projects.
Selecting The Rockwell Leg Set For Table Projects
The 2-3/8 inch diameter x 28 inch high Rockwell table leg set from Peter Meier, Inc. brings together a fixed leg height, a 1 1/8 inch adjustable foot, and a 4 9/16 inch square mounting plate, which together support controlled table-height setups. The chrome finish and Work Surface & Tables classification clarify that these legs are intended to act as visible, structural supports under table-height tops. For projects that call for repeatable table heights using the Rockwell design, this 960-28-C1 leg set offers a defined dimension, adjustment range, and mounting footprint that can be planned directly into worktop and layout drawings.