Description
Salice Self-Close Glass Door Hinge For Clean Installs
Salice self-close glass door hinge gives a 110 degree opening angle, providing wide access to cabinet interiors while keeping the door movement controlled for everyday use. This hinge is designed specifically for glass doors, so it addresses the needs of cabinets where drilling the glass is not desired. No drilling of the glass is required, which preserves glass strength and keeps shop workflow focused on the cabinet instead of glass prep. The screw-on design fits standard hardware practices on the cabinet side, helping installers keep to familiar tools and steps. As a hinge for glass doors, it supports projects that range from display cabinets to glass-front kitchen units. Being a Salice America part with manufacturer number CBG2AC9, it aligns with a recognized hinge system many shops already use.
Key Glass Hinge Details That Speed Work
- Hinge for glass doors with no drilling of the glass required keeps the glass intact and saves time otherwise spent on glass hole layouts and specialized boring equipment.
- 110 degree opening lets doors swing wide for access, which helps during installation, adjustment, and later when contents need to be reached without fighting limited door travel.
- Possible fixing inset distance on the door (K) from 0 to 22 mm gives flexibility for door overlay and cabinet design, so the same hinge can be used across different glass layouts.
- Compatible with all traditional Series 200 mounting plates and all Domi snap-on mounting plates allows integration into existing Salice programs, simplifying replacement and standardizing parts.
- Self-close function draws the door shut at the end of travel, improving day-to-day use and helping doors rest consistently against the cabinet frame or face.
Screw-On Glass Hinge Setup And Adjustments
The screw-on configuration of this Salice self-close glass door hinge fits typical cabinet-side fastening methods, so installers can attach the hinge body using regular hardware procedures. Compensated side adjustment from -1.5 mm to +4.5 mm provides lateral tuning after mounting, correcting reveals without re-drilling. Height adjustment of plus or minus 2 mm lets the door be shifted up or down on the mounting plates, which is useful for aligning multiple doors on the same run. Depth adjustment with Series 200 mounting plates of +2.8 mm and with Domi snap-on mounting plates from -0.5 mm to +2.8 mm helps set the door-to-cabinet gap, supporting clean alignment on both face-frame and frameless cabinets that use these plate systems.
Using This Salice CBG2AC9 Hinge In Real Projects
Where This 110 Degree Glass Door Hinge Fits
This Salice self-close glass door hinge is described as a hinge for glass doors, so it fits applications where the door material is glass rather than wood or composite. No drilling of the glass is required, which is valuable in display cases, wall cabinets, or commercial fixtures where tempered or finished glass panels are already sized and edged. The possible fixing inset distance on the door (K) from 0 to 22 mm supports varied layouts, from doors that nearly flush-align with the cabinet front to those that sit farther over the opening. Its 110 degree opening suits many cabinet depths by allowing the glass to clear the opening, helping avoid interference when loading items or adjusting interior hardware. Compatibility with all traditional Series 200 mounting plates and all Domi snap-on mounting plates means this hinge fits directly into Salice plate grids already used on wood-door runs, supporting mixed-material installations in the same project.
How Adjustments Support Consistent Glass Door Results
Compensated side adjustment from -1.5 mm to +4.5 mm gives room to correct small drilling or placement variations on the cabinet side while still bringing glass door gaps into line, which reduces rework on already-edged glass. Height adjustment of plus or minus 2 mm lets a run of glass doors be stepped into a uniform top and bottom line even if cabinet construction varies slightly, which is helpful on longer installations. Depth adjustment with Series 200 mounting plates at +2.8 mm and with Domi snap-on mounting plates from -0.5 mm to +2.8 mm lets the installer fine-tune how far the glass sits from the cabinet front, supporting clean reveals against adjacent fronts or moldings. The self-close behavior works together with these adjustments so that, once set, the door returns to the same closed position repeatedly. An anti-sliding safety stop described for this hinge helps the glass door remain controlled in its movement, which is important when aligning delicate glass edges near adjacent doors or side panels.
Common Questions About Salice Glass Door Hinge CBG2AC9
What type of doors is the Salice CBG2AC9 hinge designed for?
The Salice self-close glass door hinge CBG2AC9 is described as a hinge for glass doors, so it is intended specifically for cabinet or casework doors made from glass.
Does this glass hinge require drilling into the glass panel?
The hinge for glass doors requires no drilling of the glass, allowing use with finished glass panels and avoiding glass boring steps during fabrication.
What opening angle does this Salice glass door hinge provide?
The Salice self-close glass door hinge offers a 110 degree opening, giving wide access to the cabinet interior and helping the glass clear adjacent parts.
Which mounting plates work with the Salice CBG2AC9 hinge?
The CBG2AC9 hinge is compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates, integrating with existing Salice systems.
What inset range on the glass door does this hinge support?
This hinge allows a possible fixing inset distance on the door (K) from 0 to 22 mm, giving flexibility for different door positions relative to the cabinet front.
How adjustable is this glass hinge for final alignment?
The hinge offers compensated side adjustment from -1.5 mm to +4.5 mm, height adjustment plus or minus 2 mm, and depth adjustment ranges depending on the mounting plate type.
Select Salice CBG2AC9 For Glass Door Projects
This Salice self-close glass door hinge with 110 degree opening, no drilling of the glass required, and K inset from 0 to 22 mm supports flexible cabinet designs using glass fronts. Compatibility with Series 200 and Domi snap-on mounting plates keeps it aligned with common Salice layouts. Side, height, and depth adjustments translate into efficient on-site tuning. For glass door runs built around Salice systems, this CBG2AC9 hinge offers a coordinated option ready for professional installation workflows.
