Salice Soft-Close Glass Door Hinge, 110° Screw-On - CBG2AE9

Salice Soft-Close Glass Door Hinge For Cabinet Use

Salice soft-close glass door hinge is a hinge for glass doors that uses a soft-close function, so the door slows at the end of travel and reduces impact on the cabinet. The hinge offers a 110 degree opening, giving wide access to the interior for loading, unloading, and hinge adjustment. No drilling of the glass is required, so the glass panel stays intact during fabrication and avoids extra machining steps. The hinge is compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates, tying into existing Salice hinge layouts. Possible fixing inset distance on the door (K) runs from 0 to 22 mm, so the same hinge can serve different overlays and door positions on the frame. Height adjustment plus or minus 2 mm, depth adjustment ranges, and compensated side adjustment help dial in reveals after the doors are hung.

Key Glass Door Hinge Details For Jobs

• The hinge is designed as a hinge for glass doors, so it suits glass cabinet fronts where a glass-specific hinge interface is needed on furniture or casework.
• No drilling of the glass is required, which keeps the glass unperforated and supports workflows that rely on cut-to-size glass without hinge hole boring.
• The 110 degree opening lets doors swing wide, which helps during installation, shelf adjustment, and everyday cabinet access in tight shop or site conditions.
• Compatibility with all traditional Series 200 mounting plates connects this hinge to common Salice plate footprints already used in many cabinet lines.
• Compatibility with all Domi snap-on mounting plates supports snap-on mounting workflows where doors are attached or removed from the cabinet without tools at the plate interface.
• Compensated side adjustment from -1.5 mm to +4.5 mm supports fine-tuning of door gaps, helping align multiple doors in a run without rehanging them.

Mounting And Adjustment Details For Installers

The hinge uses a screw-on design, so the body is attached with screws during installation for a secure mechanical connection to the mounting plate and cabinet. The possible fixing inset distance on the door (K) from 0 to 22 mm lets installers position the hinge on different door setbacks and maintain consistent overlays across a project. Height adjustment of plus or minus 2 mm gives vertical tuning without moving the mounting plates, which matters when doors must align to adjacent fronts and cabinet tops. With Series 200 mounting plates, depth adjustment of plus 2.8 mm helps bring the door closer to the cabinet, while Domi snap-on mounting plates provide depth adjustment from -0.5 mm to +2.8 mm for more flexible front-to-back positioning.

Using This CBG2AE9 Hinge In Real Projects

Where This Salice Glass Door Hinge Fits Best

This hinge for glass doors matches cabinet and furniture applications that use glass panels where a soft-close action is desired. Because no drilling of the glass is required, it works in situations where the glass supplier delivers simple rectangular panes without hinge cup holes. The 110 degree opening supports upper and lower cabinet doors that need generous swing to clear face frames or adjacent doors. Compatibility with all traditional Series 200 mounting plates means it integrates into existing Salice layouts in shops that already standardize on Series 200 geometry. Compatibility with all Domi snap-on mounting plates suits projects where quick door removal is useful during finishing, transport, or service.

Why The Adjustment Range Supports Clean Lines

The possible fixing inset distance on the door (K) from 0 to 22 mm helps tailor how far the glass sits from the cabinet edge, which is useful when matching overlays across mixed wood and glass fronts. Compensated side adjustment from -1.5 mm to +4.5 mm lets installers shift the door sideways, so they can close up gaps or open them slightly to clear hand-pulled doors next to each other. Height adjustment of plus or minus 2 mm means vertical reveals can be corrected at the hinge instead of altering the cabinet. With Series 200 mounting plates, depth adjustment of +2.8 mm lets the door move toward the cabinet interior, helping refine how tightly the door closes against seals or frames. With Domi snap-on mounting plates, depth adjustment from -0.5 mm to +2.8 mm gives both in-and-out movement, which helps when cabinets are slightly out of plane and the door must sit flush. An anti-sliding safety stop br feature helps keep the door from shifting unexpectedly at the hinge point, supporting consistent alignment over repeated openings.

Common Questions About The Salice CBG2AE9 Hinge

Choose This Hinge For Adjustable Glass Doors

The Salice soft-close glass door hinge CBG2AE9 combines a hinge for glass doors design with no drilling of the glass, so glass panels stay simple and usable across different projects. The 110 degree opening, Series 200 compatibility, and Domi snap-on mounting plate compatibility give flexibility whether the work relies on traditional screw-on plates or snap-on workflows. The K distance range from 0 to 22 mm, side adjustment from -1.5 mm to +4.5 mm, height adjustment plus or minus 2 mm, and depth ranges help deliver clean reveals with repeatable setups. Select this hinge when a soft-close glass door solution with multiple mounting plate options is needed.