Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1 inch diameter standoff kit is a complete standoff kit designed to install a sign or display using matched components. The Pro Value Series branding identifies this kit as part of a consistent line of standoffs, which helps keep projects uniform when matching existing installations across a job.
The kit uses a satin clear anodized finish, which creates a neutral metallic look that blends with many sign and display materials while keeping visual focus on the graphics. The 1 inch diameter standard caps present a substantial face on the sign surface, so mounting points look intentional and balanced rather than undersized.
The 1 inch diameter by 1/2 inch long barrels set the sign or display off the mounting surface by 1/2 inch, which creates a defined shadow line without pushing the panel too far out into traffic paths or tight spaces. This proportion works well for typical interior sign and display layouts where projection depth is limited.
The 1 inch diameter standard caps thread onto the studs and barrels, which lets the installer tighten the sign or display securely from the visible face without disturbing the wall fasteners. This approach keeps adjustment focused at the sign surface for quicker alignment.
The 1 inch diameter by 1/2 inch long barrels register against the mounting surface while receiving the combination screws, so the barrels act as both spacers and housings. This creates a stable 1/2 inch offset and helps keep each mounting point square to the wall.
The studs sized for material up to 3/8 inch thick project through the sign or display panel into the barrels, which positions the panel solidly between cap and barrel when tightened. This arrangement holds typical 3/8 inch and thinner materials firmly for everyday traffic conditions.
The complete standoff kit configuration is designed to install a sign or display, so it suits interior sign panels, informational displays, or decorative panels that fit within the 1 inch diameter cap footprint and material up to 3/8 inch thick. The satin clear anodized finish pairs well with typical sign substrates such as acrylic, metal, or composite panels that benefit from a neutral metallic mounting detail.
The 1 inch diameter by 1/2 inch long barrels are suited to applications where a moderate 1/2 inch projection is appropriate, such as corridor markers, directional signs, and small to medium wall graphics that should stand off the wall without becoming obstructions. When several panels are mounted nearby, the fixed 1/2 inch standoff depth and shared Pro Value Series look help maintain a uniform line across multiple locations.
The 1 inch diameter standard caps give the installer a predictable bearing surface at each mounting point, which helps distribute load and reduces the tendency for panels within the specified material thickness to rock at the hardware. Because the studs are designed for material up to 3/8 inch thick, the clamping range is tuned to common sign panel dimensions, which supports repeatable tightening from one sign to the next on the same project.
The combination screws and multi-purpose nylon anchors work together with the barrels to establish a secure connection to typical wall conditions, which lets the visible standoff components focus on alignment and spacing instead of load transfer alone. The satin clear anodized finish across caps and barrels keeps the hardware visually consistent, so replacement or added signs using the same SZG4004 standoff kit line up both mechanically and visually with earlier installations.
The 1 inch diameter standoff kit uses studs for material up to 3/8 inch thick, so sign or display panels within that range seat correctly between the caps and barrels.
The 1 inch diameter by 1/2 inch long barrels set the sign or display panel 1/2 inch off the mounting surface, creating a defined but compact stand-off reveal.
The SZG4004 standoff kit has a satin clear anodized finish, which provides a neutral metallic appearance suited to many sign and display materials.
The 1 inch diameter standard caps thread onto studs passing through the panel into the 1 inch diameter by 1/2 inch long barrels, clamping the material between cap and barrel.
The 1 inch diameter standoff kit uses combination screws and multi-purpose nylon anchors, which let the barrels fasten into various common wall or substrate materials.
The complete standoff kit design, with fixed 1 inch diameter caps and 1/2 inch barrels, standardizes hardware appearance and panel offset, keeping multiple signs visually aligned.
The 1 inch diameter x 1/2 inch long standoff kit in satin clear anodized from the Pro Value Series combines caps, barrels, studs for material up to 3/8 inch thick, and wall-mounting fasteners into one coordinated SZG4004 solution, so sign and display installations stay consistent from layout through final mounting.
