Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1 inch diameter standoff kit provides a matched set of parts to mount a sign or display off the wall, creating a clean, professional stand-off look. The Pro Value Series kit is built around 1 inch diameter standard caps that grip the face of your panel, so the load is spread over a predictable area instead of a small point. Matching 1 inch by 1-1/2 inch barrels hold the panel away from the surface at a fixed distance, which keeps the sign parallel to the mounting surface. The complete standoff kit is intended for sign or display installations using material up to 1/2 inch thick, so installers can select substrates confidently within that thickness range. Satin clear anodized aluminum finish provides a neutral, brushed-metal appearance that suits a wide range of commercial and workspace environments.
The SZG4019 standoff kit is designed so the barrels fasten to the mounting surface using the combination screws and multi-purpose nylon anchors, creating stable anchor points before the sign is positioned. The studs are then used with material up to 1/2 inch thick, passing through panel holes to connect the panel to the barrels in a controlled, repeatable way. The 1 inch diameter standard caps thread or fasten over the studs at the front, securing the sign or display while presenting a finished face. With 1 inch by 1-1/2 inch barrel dimensions, the sign stands out 1-1/2 inches from the surface, which helps installers plan hole locations, edge clearances, and layout lines.
This Pro Value Series standoff kit is intended for mounting signs or displays where a stand-off of 1-1/2 inches is desired, such as office identifiers, directional signage, or information panels in workspaces. The 1 inch diameter standard caps present a substantial face at each mounting point, which suits larger panels that benefit from visibly defined mounting hardware. Because the studs are specified for material up to 1/2 inch thick, the kit is suited to common sign substrates such as many acrylics, lightweight metals, and composite panels that fall within that thickness. The satin clear anodized aluminum finish offers a low-glare metallic appearance that pairs with a range of sign colors and surface finishes in commercial interiors.
The defined 1 inch by 1-1/2 inch barrel size gives installers a fixed projection from the mounting surface, which simplifies repeating hole patterns and aligning multiple signs along a wall. The use of matching standard caps, barrels, studs, combination screws, and multi-purpose nylon anchors in one coordinated standoff kit means each connection point is based on the same geometry, helping maintain uniform spacing and hardware appearance across the installation. Studs rated for material up to 1/2 inch thick keep the working range clear during layout, so panel drilling and edge distances can be planned around that known capacity. The satin clear anodized aluminum finish is applied to the visible metal parts, providing a consistent surface character that supports a professional, finished look on completed sign or display projects.
The standoff kit uses studs for material up to 1/2 inch thick, so sign or display panels within that thickness can be mounted using the supplied hardware geometry.
The 1 inch by 1-1/2 inch barrels position the sign or display 1-1/2 inches from the mounting surface, giving a defined stand-off distance for layout and visual depth.
The kit uses 1 inch diameter standard caps, so each mounting point shows a 1 inch round metal face on the front of the sign or display.
The standoff kit is satin clear anodized aluminum, providing a neutral, brushed-metal appearance suitable for many commercial and workspace sign designs.
The SZG4019 kit is used for mounting signs or displays, where the 1 inch diameter caps and 1-1/2 inch stand-off create a spaced, stand-off installation detail.
The barrels are fastened to the mounting surface using combination screws and multi-purpose nylon anchors, creating the base points that support the sign or display.
The 1 inch diameter x 1-1/2 inch long satin clear anodized standoff kit from the Pro Value Series gives a coordinated set of caps, barrels, studs, combination screws, and multi-purpose nylon anchors sized for material up to 1/2 inch thick. For sign and display work needing a 1-1/2 inch stand-off and a 1 inch round face at each mounting point, this SZG4019 kit provides the defined geometry and finish needed to plan hole locations, panel thickness, and visual layout with confidence.
