
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Standoff kit 1 inch diameter x 1-1/2 long in black anodized gives sign and display projects a consistent look from cap face to wall. The Pro Value Series 1 inch diameter caps match the 1 inch diameter barrels, so the installed standoffs read as a clean, uniform cylinder on the wall. The 1-1/2 inch long barrels establish a fixed stand-off distance, helping displays sit off the mounting surface at a predictable depth. Black anodized finish colors every exposed metal surface, which helps signs and graphics read clearly against lighter backgrounds. The SZG4020 part number identifies this complete standoff kit as a single solution for standard display layouts. Each standoff point uses a standard cap, barrel, stud, combination screw, and multi-purpose nylon anchor to create a solid connection between sign material and mounting surface.
This Pro Value Series standoff kit uses barrels to bridge from wall to sign, with combination screws and multi-purpose nylon anchors handling the wall connection. Studs thread into the barrels on the sign side and engage sign material up to 1/2 inch thick, so the clamping stack is defined by barrel length and material thickness. Standard 1 inch diameter caps then tighten over the studs, locking the sign panel against the barrel faces. The 1-1/2 inch long barrels fix the stand-off depth, which simplifies drilling and layout because every mounting point shares the same projection. Black anodized finish carries across caps and barrels, supporting a uniform appearance once everything is fastened.
This SZG4020 Pro Value Series standoff kit is built around a 1 inch diameter format, so it suits sign and display panels where a medium visual footprint is desired at each mounting point. The 1 inch diameter standard caps spread clamping force across a wider area on the panel face than smaller caps, which helps when working with common rigid materials up to 1/2 inch thick. The 1 inch x 1-1/2 inch barrels match the cap diameter, so side views show a straight, continuous cylinder from wall to cap front. That profile keeps multi-point installations looking aligned when signs run in rows or grids. Black anodized finish lets the standoffs visually recede against darker backgrounds or contrast against lighter walls, supporting a consistent appearance across different mounting surfaces.
The defined 1-1/2 inch barrel length sets a fixed stand-off distance, so layouts can be repeated across multiple signs without recalculating projection depth. Because the studs are specified for material up to 1/2 inch thick, installers know the cap-to-barrel engagement will accommodate typical rigid substrates within that range. Combination screws working with multi-purpose nylon anchors give a straightforward wall fastening method, which helps keep hole sizes and drilling steps predictable from job to job. Matching 1 inch diameters on caps and barrels reduce alignment distractions, so when a sign is leveled, the hardware lines visually with the panel edges. The black anodized finish on the standoffs helps finished projects read as intentional hardware choices rather than improvised fasteners. The SZG4020 designation ties these details into a single, repeatable kit for sign and display mounting.
The 1 inch diameter x 1-1/2 inch long standoff kit accepts material up to 1/2 inch thick, so panels in that range can be clamped between barrel face and cap.
The standoff kit uses 1-1/2 inch long barrels, so the sign face stands off the wall by that fixed distance where the barrels are mounted.
The Pro Value Series kit uses 1 inch diameter standard caps, so each mounting point shows a 1 inch round face on the sign surface.
The SZG4020 standoff kit uses combination screws with multi-purpose nylon anchors, providing a wall-side connection for the barrels.
The studs thread into the barrels and pass through the sign material up to 1/2 inch thick, letting the 1 inch caps tighten and secure the panel.
The 1 inch diameter x 1-1/2 inch long standoff kit is black anodized, giving the visible metal parts a dark, uniform appearance.
The Pro Value Series 1 inch diameter x 1-1/2 inch long black anodized standoff kit brings caps, barrels, studs, combination screws, and multi-purpose nylon anchors together for sign and display mounting. With hardware sized for material up to 1/2 inch thick, this SZG4020 assembly supports typical rigid panel jobs needing a fixed 1-1/2 inch stand-off distance. For projects calling for black anodized 1 inch diameter standoffs from a single source, this kit from Wurth Baer Supply aligns well with repeatable sign layouts.