Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #7 x 1-inch modified pan head screw is purpose-built for pocket-hole joinery and face frame assembly in softwood and sheet goods. The 1-inch length is sized for thin-stock applications, including 1/2-inch material and shallow pocket joints where a longer screw would over-penetrate or blow through the back face.
The 1-inch length is the right choice when stock thickness or joint depth limits how much screw can be used. Common applications include attaching a face frame to a cabinet box where the combined material is thin, joining 1/2-inch plywood components at an edge or corner pocket, and assembling light-duty drawer boxes from sheet goods. It also works for pocket joints in narrow face-frame members where a 1-1/4-inch screw would reach the far face. For 3/4-inch hardwood face frames, step up to a longer length with fine thread; this screw is at home in softwood pine, poplar, MDF, and melamine-faced panels.
The lubricated coating on this screw reduces friction between the threads and the wood fiber as the screw is driven, which matters most in repetitive production work where a dry screw would build heat, increase torque demand, and wear driver bits faster. Paired with the coarse thread, which grips the open fiber matrix of softwood and engineered panels more aggressively than a fine thread would, this combination is optimized for the materials most cabinet shops use on box construction and face frame attachment. The modified pan head adds a low, flat profile that sits cleanly against the pocket wall without rocking or tilting the joint.
Cabinet shops running softwood and sheet-good face frames will get the most from this screw. It is a natural fit for production lines assembling painted or primed poplar and pine frames, RTA cabinet boxes in MDF or particleboard, and laminate casework where a coarse-thread, lubricated screw can be driven fast without stopping to adjust torque settings. The 10,000-piece box supports continuous production without the cost and handling of smaller quantities. Contractors and finish carpenters installing pre-built cabinet boxes in the field will also find the 1-inch length useful for thin-stock pocket connections that come up on a typical install day.
For 3/4-inch hardwood face frames joined with pocket holes, the standard length is 1-1/4 inches. The 1-inch screw is better suited to thinner stock, 1/2-inch panels, or shallow pockets where a longer screw would over-penetrate. It also works for attaching a face frame to a cabinet box when the combined depth is limited.
Coarse thread is the right choice for softwood, MDF, plywood, melamine, and particleboard. The wider thread spacing grips the open fiber structure of these materials more effectively than fine thread, which is reserved for dense hardwoods like maple, oak, and cherry.
The lubricant coating reduces friction as the screw drives, lowering the torque required to fully seat it. In a production shop driving hundreds of screws per shift, that translates to less heat buildup, less driver wear, and fewer stripped heads compared to uncoated screws in the same material.
Yes. The coarse thread and Type 17 auger point are both well suited to MDF and melamine-faced panels. The auger point reduces splitting at the entry face, and the coarse thread provides solid grip in the lower-density panel core.
No. This modified pan head screw does not have nibs. The pan head is designed to bear flat against the pocket wall rather than countersink into the surface, so nibs are not part of the design.
Matched to thin stock and softwood production, the Würth #7 x 1-inch face frame and pocket-hole screw delivers consistent, fast seating across the materials and joint depths where it belongs — so assembly stays on pace and joints close cleanly, box after box.
Sold In: 10000 Each