Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
stainless steel sink tip out tray gives you a slim storage area behind a false sink front in a sink base cabinet. The Rev-A-Shelf sink tip out tray in the 6541 Series is made of stainless steel with a stainless steel finish and is sized at 11-1/4 inches long, 1-11/16 inches deep, and 3 inches high. This sink tip out tray set includes one tray, two sink tip out tray hinges, and mounting hardware. It is designed for a tip out tray for sink cabinet use where the sink base cabinet opening width is 13-1/2 inches or larger. Rev-A-Shelf states this stainless steel tip out tray requires at least 1-3/4 inches of clearance between the backside of the door and the front of the sink.
Key specs to confirm: This sink tip out tray measures 11-1/4 inches long, 1-11/16 inches deep, and 3 inches high. Rev-A-Shelf lists it for a sink base cabinet opening width of 13-1/2 inches or larger. The product also requires at least 1-3/4 inches of clearance between the backside of the door and the front of the sink. Before purchase, confirm your false front size, available interior clearance, and whether your cabinet layout leaves room for the tray and hinges. Safety, load, compliance, and any unlisted installation limits are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One stainless steel tray, two hinges, and mounting hardware.
What to verify before ordering: Check cabinet opening width, false front dimensions, sink-to-door clearance, and whether the no tab stop tray style matches your replacement or new install needs. Confirm that plumbing, sink clips, and nearby hardware will not interfere with tray movement.
A sink base cabinet tip out tray is commonly used when the false drawer front in front of a sink would otherwise go unused. In many kitchen and bath cabinets, that narrow space is one of the few practical places to keep small items close to the sink. A Rev-A-Shelf sink tip out tray helps turn that area into accessible storage without requiring a full drawer box.
This product is a practical fit for installers, cabinet shops, and serious DIY buyers who need a stainless steel sink tip out tray for a sink base cabinet opening width of 13-1/2 inches or larger. It is also useful as a replacement sink tip out tray when an older plastic or metal tray is worn, stained, or no longer matches the cabinet setup. Because the tray is made of stainless steel and has a stainless steel finish, it suits sink areas where moisture resistance and easy wipe-down matter.
The compact dimensions are important in real jobs. At 11-1/4 inches long and 1-11/16 inches deep, this tip out tray for sink cabinet applications is intended for shallow spaces behind a false front. The 3 inch height gives you a contained tray area for small sink-side items. Buyers should still confirm how the sink bowl, faucet hardware, clips, and plumbing affect usable space inside the cabinet. A tray that fits on paper can still run into interference if the sink or hardware projects farther back than expected.
Installation planning matters as much as tray size. Rev-A-Shelf specifies at least 1-3/4 inches of clearance between the backside of the door and the front of the sink. That measurement is critical because the tray and sink tip out tray hinges need room to move. If you are replacing an existing unit, verify that the no tab stop design matches the style already installed or the function you want. If you are installing in a new cabinet, confirm the false front construction and hinge mounting area before drilling.
This sink tip out tray set includes one tray, two hinges, and mounting hardware, which helps simplify ordering for a basic install. For trade buyers handling multiple cabinet accessories, that included hardware can reduce the chance of missing parts at install time. For a homeowner, it means the main components arrive together, but fit should still be checked against the cabinet and sink layout first.
When comparing a stainless steel tip out tray to other sink front storage products, buyers usually focus on material, dimensions, included hardware, and clearance requirements. This Rev-A-Shelf sink tip out tray gives clear, verified sizing and a stated clearance requirement, which makes planning easier than choosing a tray with limited fit information.
Material matters in a sink base cabinet accessory because the area is exposed to moisture, cleaning products, and frequent handling. Stainless steel is often selected when buyers want a tray material that suits wet cabinet zones and is easy to clean. The included hinges and mounting hardware also matter because they define what arrives in the package for a standard installation setup.
Another point of comparison is application fit. This tray is designed for a sink base cabinet opening width of 13-1/2 inches or larger, so it is best matched to cabinets that meet that requirement. Buyers comparing generic tray options should pay close attention to opening width, tray length, and the required clearance between the false front and sink. Those details usually determine whether a tray installs cleanly or creates rework.
Brand consistency can also support ordering confidence. Rev-A-Shelf is a known cabinet accessory manufacturer, and this product is clearly identified as a 6541 Series stainless steel sink tip out tray. For buyers managing replacements across several cabinets, that product identity helps when matching an existing tray type or standardizing hardware across a project. If any mounting pattern, stop style, or application detail is critical to your job, confirm it before ordering rather than assuming interchangeability across tray styles.
This sink tip out tray is designed for a sink base cabinet opening width of 13-1/2 inches or larger, but buyers must also confirm false front size and interior clearance.
The Rev-A-Shelf sink tip out tray requires at least 1-3/4 inches of clearance between the backside of the door and the front of the sink.
The stainless steel sink tip out tray measures 11-1/4 inches long, 1-11/16 inches deep, and 3 inches high.
This sink tip out tray set includes one stainless steel tray, two hinges, and mounting hardware.
This replacement sink tip out tray can work where the cabinet opening, tray size, clearance, and no tab stop style match the existing application.
This Rev-A-Shelf tray is specified as a no tab stop model, so buyers should confirm that style matches their intended function or existing hardware setup.
This sink tip out tray is listed in kitchen and bath cabinet accessories, so it can be used in either setting when the cabinet and sink clearances match.
This tip out tray for sink cabinet installation should be checked for opening width, sink clearance, false front dimensions, and interference from plumbing or sink clips. Follow manufacturer installation guidance and local building requirements where applicable.
The stainless steel tip out tray gives buyers a metal tray surface that can be wiped clean in normal sink base cabinet use.
sink tip out tray selection comes down to fit, clearance, and included hardware. This Rev-A-Shelf sink tip out tray set includes one stainless steel tray, two hinges, and mounting hardware, with verified dimensions of 11-1/4 inches by 1-11/16 inches by 3 inches. Before purchase, confirm that your sink base cabinet opening width is 13-1/2 inches or larger and that you have at least 1-3/4 inches of clearance between the backside of the door and the front of the sink. Also verify that the no tab stop design matches your installation or replacement needs.
Sold In: 1 Set