Rev-A-Shelf 6541 Series Stainless Steel 16"L x 1-11/16"D x 3"H x Self-close Sink Tip Out Tray, No Tab Stop - 6541-16-4
Description
Choose a Rev-A-Shelf sink tip out tray
Rev-A-Shelf sink tip out tray gives you a slim storage tray for the false front area at a sink cabinet. This Rev-A-Shelf 6541 Series tray is a stainless steel sink tip out tray sized at 16 inches long, 1-11/16 inches deep, and 3 inches high. The product is described as a self-close sink tip out tray and is sold as a set with 1 tray and 2 hinges. Buyers looking for a sink tip out tray with hinges or a tipout tray replacement can use this model when the cabinet front and sink area have enough room for the tray depth and hinge movement. The stainless steel construction and stainless steel finish fit kitchens and baths where moisture resistance and easy cleanup matter.
Use this sink tip out tray well
- Rev-A-Shelf 6541 Series design - helps buyers match an existing series or specify a consistent sink tip out tray for new cabinet work.
- Stainless steel tray construction - gives the sink tip out tray a metal build suited to wet sink cabinet areas.
- Stainless steel finish - supports a clean, uniform look and makes the tray easy to wipe down during routine maintenance.
- 16 inch length - helps buyers plan fit across the sink front opening before drilling or replacing older hardware.
- 1-11/16 inch depth - gives this slim sink front tray a narrow profile for cabinets with limited space behind the false front.
- 3 inch height - provides contained storage space for small sink-side items while keeping the tray profile defined.
- Self-close sink tip out tray format - supports a controlled return of the sink front tray during normal use.
- Set includes 1 tray and 2 hinges - gives the buyer the main tray and hinge components called out in the verified product description.
- No tab stop configuration - helps buyers match a specific tray style when replacing an existing Rev-A-Shelf tip out tray.
Confirm sink tip out tray fit
Key specs to confirm: This sink tip out tray is a Rev-A-Shelf 6541 Series stainless steel model with a 16 inch length, 1-11/16 inch depth, and 3 inch height. Before ordering, confirm the false front width, the available space behind the sink front, and the clearance around plumbing, sink bowls, clips, and mounting rails. Because this is listed as a self-close sink tip out tray with no tab stop, buyers should also confirm that the hinge action and tray style match the cabinet front they are repairing or building. Any load, compliance, or other technical details not shown here should be confirmed with the manufacturer or technical documentation.
What's included: Verified included items are 1 stainless steel sink tip out tray and 2 hinges. Other hardware details should be confirmed before ordering if your install requires specific fasteners or templates.
What to verify before ordering: Check sink base opening width, false front dimensions, interior obstructions, hinge mounting location, and whether your project needs this no tab stop version. Confirm that a 16 inch tray is the correct replacement length for your cabinet.
Plan sink front tray use
Use a sink front tray daily
A sink tip out tray is commonly used in the false drawer front below a kitchen or bath sink. That area is often wasted because plumbing and sink hardware limit full drawer use. A Rev-A-Shelf tip out tray helps turn that narrow space into practical storage for small items that need to stay close to the sink. Installers often use this product type when replacing a worn plastic tray, updating a sink base during a remodel, or adding organized storage to a new cabinet build.
This RS6541-16-4 model is suited to projects that need a slim profile. The verified 1-11/16 inch depth matters when space behind the sink front is tight. In many sink cabinets, faucet hardware, sink clips, bowls, and water lines reduce usable depth. A stainless steel sink tip out tray can be a good fit when the opening is narrow but the buyer still wants a durable tray material. The 16 inch length is also important for matching the false front size. If you are handling a tipout tray replacement, measure the existing tray and compare the hinge spacing and opening width before ordering.
The self-close sink tip out tray format can also matter in daily use. Buyers who want a controlled close on the sink front often look for this style instead of a basic open tray only. Since this set includes 2 hinges, it is aimed at buyers who need the tray and hinge components together rather than the tray alone. If your cabinet already has installed hardware, confirm whether those hinges are compatible or whether the included hinges should be used for the intended fit. For both kitchen and bath applications, follow manufacturer installation guidance and local building requirements where applicable.
Compare stainless steel tip out tray options
When buyers compare sink tip out tray options, the main differences are usually material, size, included hardware, and tray style. This Rev-A-Shelf sink tip out tray is clearly identified as stainless steel, which gives buyers a straightforward material choice for damp sink cabinet conditions. The stainless steel finish also provides a consistent appearance for projects where visible hardware and accessories should stay coordinated.
Another point of comparison is whether the tray is sold alone or as a set. This product is verified as a set with 1 tray and 2 hinges, which can simplify ordering for a new install or a direct replacement where the old hardware is being removed. Buyers should still confirm whether extra screws, templates, or mounting instructions are needed for their specific cabinet construction, because those details are not verified here.
Size is also a major factor in reliability and ease of install. A sink front tray that is too long can interfere with the cabinet opening, while one that is too deep can contact plumbing or the sink bowl. This model gives buyers clear reference points: 16 inches long, 1-11/16 inches deep, and 3 inches high. The no tab stop configuration is another detail worth checking when comparing options, especially if you are matching an existing Rev-A-Shelf 6541 Series tray or replacing a tray in a multi-cabinet project. Choosing by verified dimensions and included components is the safest way to avoid fit problems.
Ask about sink tip out tray fit
What is included with this sink tip out tray set?
This Rev-A-Shelf sink tip out tray set includes 1 stainless steel tray and 2 hinges.
What are the dimensions of this Rev-A-Shelf sink tip out tray?
This Rev-A-Shelf sink tip out tray is 16 inches long, 1-11/16 inches deep, and 3 inches high.
Will this sink front tray fit any sink base cabinet?
This sink front tray fits only where the false front, interior clearance, and hinge movement match the tray size and cabinet layout.
Is this a sink tip out tray with hinges or tray only?
This sink tip out tray with hinges is sold as a set with 1 tray and 2 hinges.
What should I measure before ordering a tipout tray replacement?
A tipout tray replacement should be matched by false front width, interior depth, tray length, and clearance around plumbing and sink hardware.
Is this tray stainless steel?
This Rev-A-Shelf tip out tray is made of stainless steel and has a stainless steel finish.
What does no tab stop mean on this tray?
This Rev-A-Shelf sink tip out tray is listed as a no tab stop model, so buyers should confirm that this configuration matches their cabinet setup.
Can this self-close sink tip out tray be used in a bathroom vanity?
This self-close sink tip out tray can be considered for bath use if the false front size and interior clearance match the verified tray dimensions.
Do I need to check codes for this product?
This sink tip out tray has no verified compliance details listed here. Follow manufacturer installation guidance and local building requirements where applicable.
Order the right Rev-A-Shelf tip out tray
Rev-A-Shelf tip out tray selection is easiest when you match the tray length, depth, and included hardware to the sink front opening you already have. This RS6541-16-4 set includes 1 stainless steel tray and 2 hinges, with verified dimensions of 16 inches long, 1-11/16 inches deep, and 3 inches high. Before purchase, confirm false front size, interior obstructions, and whether you need the no tab stop configuration. Careful measuring helps you avoid returns and choose the correct sink tip out tray for your cabinet build or replacement job.
