Rev-A-Shelf 6541 Series Stainless Steel 22"L x 1-11/16"D x 3"H x Sink Tip Out Tray, No Tab Stop - 6541-22-5

Choose a Rev-A-Shelf sink tip-out tray

Rev-A-Shelf sink tip-out tray is a stainless steel sink tip-out tray made for sink front access where a slim tray is needed. This Rev-A-Shelf 6541 series sink tip-out tray measures 22 inches long, 1-11/16 inches deep, and 3 inches high. The tray is made of stainless steel with a stainless steel finish, which makes it a practical rev a shelf tipout tray for kitchens and baths that use a false drawer front. Buyers looking for a sink tip-out tray replacement often start with sink tip-out tray dimensions, and this model is built around a narrow depth profile. The verified product data identifies this unit as one tray with no tab stop, sold individually.

Use stainless steel sink tip-out tray advantages

• Rev-A-Shelf 6541 series design - Gives buyers a clear product family reference when matching a replacement tray to an existing sink front setup.
• Stainless steel construction - Supports use in sink areas where moisture exposure is common and buyers want a metal sink tip-out tray.
• Stainless steel finish - Provides a consistent material and finish choice for visible cabinet accessory applications.
• 22 inch length - Helps buyers match the tray to a sink front opening that can accept this verified tray length.
• 1-11/16 inch depth - Fits applications that need a slim profile behind a false drawer front near plumbing or sink clearance points.
• 3 inch height - Gives a defined tray wall height for holding small sink-area items once installed.
• No tab stop configuration - Helps buyers order the correct tray style when replacing an existing no tab stop sink tip-out tray.
• One tray per package - Makes ordering straightforward for single-cabinet projects or one-for-one sink tip-out tray replacement work.

Confirm sink tip-out tray fit details

Key specs to confirm: This sink tip-out tray is a Rev-A-Shelf stainless steel tray with verified dimensions of 22 inches long, 1-11/16 inches deep, and 3 inches high. For this product type, buyers should confirm the false drawer front width, available depth behind the panel, and clearance around the sink basin and plumbing. If you are replacing an older unit, compare your current sink tip-out tray dimensions and mounting style carefully. The product data confirms a no tab stop tray, but hinge details are not verified for this specific item, so hinge compatibility and mounting requirements should be checked before purchase. Any safety, load, compliance, or installation details not listed here should be confirmed with the manufacturer or technical documentation.

What's included: Verified data confirms one Rev-A-Shelf 6541 series stainless steel sink tip-out tray, sold individually. Included hardware and hinges should be confirmed before ordering.

What to verify before ordering: Confirm your sink front opening can accept a 22 inch tray, verify that 1-11/16 inch depth clears plumbing and sink structure, check whether your project requires a no tab stop tray, and confirm whether hinges or other mounting parts are needed for your installation.

Compare sink tip-out tray buying factors

Match sink tip-out tray use to cabinets

A sink tip-out tray is commonly used behind a false drawer front at the sink to create shallow storage for small items. For a kitchen or bath cabinet, that can mean keeping sponges, scrubbers, sink plugs, or other compact accessories within reach without taking up room below the sink. A buyer searching for a sink tip-out tray replacement usually needs to match three things first: tray length, tray depth, and the style of the existing setup.

This Rev-A-Shelf 6541 series sink tip-out tray is built for applications where a narrow tray is needed. The verified 1-11/16 inch depth matters because sink areas often have limited clearance behind the front panel. If plumbing, sink bowls, or support members reduce available space, a slim tray can be the deciding factor. The 22 inch length also gives buyers a specific fit point when replacing an existing tray or planning a new false front accessory.

For installers and serious DIY buyers, the practical question is not just whether a tray looks right, but whether it physically fits and matches the mounting style already in use. The verified product data identifies this model as a no tab stop tray, so that detail should be checked against the cabinet front and any existing hardware. If your current setup uses different stops or a different hinge arrangement, confirm compatibility before ordering. Buyers using search terms like revashelf sink tip-out tray or sink tip-out tray dimensions are usually trying to avoid a return caused by a small fit mismatch, and that is especially important in sink cabinets where clearance can be tight.

Because the tray is stainless steel with a stainless steel finish, it is suited to the sink area product category without adding extra material assumptions. If your project calls for one tray only, the verified packaging is straightforward: this item is sold as each.

Compare stainless steel sink tip-out tray options

When buyers compare sink tip-out tray options, the first distinction is usually material, then size, then included parts. This product gives a clear material callout because it is a stainless steel sink tip-out tray from Rev-A-Shelf. That makes comparison easier for buyers who want a metal tray rather than another material type.

Another useful comparison point is profile. Some sink front spaces can accept a deeper tray, while others need a narrow format to clear sink components. This model is verified at 1-11/16 inches deep, which makes it a focused choice for slim applications. In generic comparison terms, a tray with a known narrow depth can reduce guesswork when working near tight sink clearances, but the buyer still needs to measure the cabinet and false front carefully.

The no tab stop detail also matters in comparison shopping. Buyers replacing an existing tray often need that exact style rather than a similar-looking alternative. If a product listing does not clearly state stop style, included hardware, or exact dimensions, it can be harder to confirm fit. Here, the verified dimensions and tray style give a solid starting point. What remains to verify is whether hinges are included and whether the mounting method matches your cabinet front. That is the practical difference between choosing a tray that may fit and choosing one with enough verified information to support a more confident order.

For trade buyers, consistency in product identification also helps. The brand, series, and manufacturer part are all clearly tied to this tray, which supports cleaner reorder and replacement workflows when matching cabinet accessories across projects.

Check sink tip-out tray order questions

Order the right sink tip-out tray

RS6541-22-5 is a product-specific way to order this Rev-A-Shelf sink tip-out tray when you need a 22 inch stainless steel tray with a 1-11/16 inch depth and 3 inch height. Verified data confirms one tray and a no tab stop configuration, but buyers should still confirm hinge inclusion, mounting compatibility, and sink front clearance before purchase. For replacement work, compare your current tray dimensions and style closely so the new sink tip-out tray matches the cabinet opening and available space.