Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Rev-A-Shelf sink tip out tray gives you a practical way to use the false-front space at a sink cabinet. This stainless steel sink tip out tray is part of the Rev-A-Shelf 6541 Series and is made for buyers who want a slim tray with self-close function. The verified product size is 14-1/4 inches long, 1-11/16 inches deep, and 3 inches high. RS6541-14-4 includes one tray and two hinges, which helps buyers sourcing a complete tipout tray set instead of separate parts. The tray is stainless steel with a stainless steel finish, and the product is identified as a no tab stop design. For installers, that means checking cabinet false-front dimensions and hinge placement before ordering so the self-close sink tip out tray fits the opening correctly.
Key specs to confirm: This sink tip out tray is a Rev-A-Shelf 6541 Series stainless steel model with a verified size of 14-1/4 inches long, 1-11/16 inches deep, and 3 inches high. Before purchase, confirm the false-front opening width, the available interior clearance behind the sink front, and whether plumbing, sink bowls, clips, or cabinet rails will interfere with the tray or sink tip out tray hinges. Because this product is listed as self-close and no tab stop, buyers should also confirm that the hinge style and tray motion match the cabinet front and installation method. Safety, compliance, and any unlisted technical details should be confirmed with the manufacturer or technical documentation.
What's included: One stainless steel sink tip out tray and two hinges are verified as included with RS6541-14-4.
What to verify before ordering: Check cabinet false-front size, inside clearance, sink and plumbing obstructions, required hinge placement, and whether a no tab stop tray is appropriate for your application. If you are matching an existing rev a shelf or revashelf part, confirm the exact part number before ordering.
A sink tip out tray is commonly used in the false-front panel below a sink, where there is often wasted space that cannot hold a full drawer. Buyers usually choose this product type when they want quick access to small sink-area items without changing the cabinet box. In that setting, the Rev-A-Shelf sink tip out tray gives a verified shallow profile of 1-11/16 inches deep, which is useful when space behind the false front is limited by sink bowls or plumbing.
This RS6541-14-4 model is suited to installers and serious DIY buyers who already know they need a 14-1/4 inch tray and want the included sink tip out tray hinges in the same set. That can simplify sourcing because the verified package includes one tray and two hinges. The stainless steel sink tip out tray format also matters in sink cabinets, where buyers often prefer a metal tray for a wet zone instead of another material. The 3 inch tray height is another confirmed dimension that should be checked against the available interior space and the size of the items you plan to store.
For replacement work, the 6541 series sink tip out tray is useful when you are matching an existing Rev-A-Shelf setup or standardizing several sink cabinets around the same tray family. For new work, this self-close sink tip out tray can fit projects where the cabinet front is designed to tilt out for access to sponges, scrubbers, or other compact items. Because the product is listed as a no tab stop design, buyers should confirm how that detail fits their preferred installation method and expected tray travel. If your cabinet has unusual framing, heavy false fronts, or tight sink hardware clearances, those conditions should be checked before ordering rather than assumed from the tray dimensions alone.
When buyers compare sink tip out tray products, the most useful differences are usually material, tray depth, included hardware, and whether the set is sold with hinges. This rev a shelf model gives clear verified information in those areas. It is stainless steel, it has a stainless steel finish, it is part of the 6541 Series, and it includes one tray with two hinges. That makes it easier to compare against other generic tray listings that may not clearly state what is in the package.
Another practical comparison point is dimensional clarity. This sink tip out tray has verified dimensions of 14-1/4 inches long, 1-11/16 inches deep, and 3 inches high. Buyers can use those numbers to check fit instead of relying on broad category descriptions. The self-close function is also a useful selector for buyers who want a tray that returns closed after use, but the exact hinge behavior and mounting details should still be confirmed against the manufacturer guidance for the cabinet front you are using.
Brand consistency can matter when a shop or installer wants repeatable parts sourcing. Rev-A-Shelf is the verified brand for this product, and the 6541 Series identification helps buyers keep part families organized across multiple jobs. If you are comparing a tipout tray for a repair, replacement, or cabinet build, the safest path is to match the product type, material, dimensions, included hardware, and no tab stop detail to your cabinet conditions before purchase.
This sink tip out tray fits only where the false-front opening and interior clearances match the verified tray size and hinge setup. Follow manufacturer installation guidance and local building requirements where applicable.
RS6541-14-4 is a Rev-A-Shelf sink tip out tray that measures 14-1/4 inches long, 1-11/16 inches deep, and 3 inches high.
This Rev-A-Shelf sink tip out tray includes one tray and two hinges as verified in the product data.
This sink tip out tray is made of stainless steel and has a stainless steel finish.
This tipout tray is identified as a no tab stop design. Buyers should confirm with manufacturer documentation how that detail affects installation and tray travel.
This 6541 series sink tip out tray may work as a replacement if the tray dimensions, included hinge setup, and no tab stop style match your existing application.
This self-close sink tip out tray has a verified depth of 1-11/16 inches, so buyers can evaluate it for shallow sink-front spaces.
Sink tip out tray installations require checking false-front width, inside clearance, sink and plumbing obstructions, and hinge mounting space. Follow manufacturer installation guidance and local building requirements where applicable.
This Rev-A-Shelf product is sold as each and includes one tray with two hinges.
RS6541-14-4 is a practical choice when you need a verified Rev-A-Shelf sink tip out tray with stainless steel construction, self-close function, and included hinges. Before purchase, confirm the 14-1/4 inch length, 1-11/16 inch depth, and 3 inch height against your cabinet false front and interior clearances. Also verify that the no tab stop design and included two-hinge setup match your installation plan. Careful fit checks help you avoid ordering the wrong sink tip out tray for the cabinet opening.
Sold In: 1 Each
