Rev-A-Shelf 6541 Series Stainless Steel 19"L x 1-11/16"D x 3"H x Sink Tip Out Tray, No Tab Stop - 6541-19-5

Choose a Rev-A-Shelf sink tip out tray

Rev-A-Shelf sink tip out tray gives you a slim storage tray for the false front area at a sink cabinet. This stainless steel sink tip out tray is the Rev-A-Shelf 6541 Series model 6541-19-5, made in a 19 inch length with a 1-11/16 inch depth and 3 inch height. The product data identifies this unit as a sink tip out tray with no tab stop and a stainless steel finish. For buyers replacing a worn tip out tray or adding a sink front tray to a cabinet project, this format helps use narrow space that is often left empty. Rev-A-Shelf offers the 6541 series in slim depths and multiple lengths, which helps buyers match tray size to the sink front opening before installation.

Use this sink tip out tray for access

• Rev-A-Shelf 6541 Series sink tip out tray - helps organize the sink front area with a tray format made for this cabinet application.
• Stainless steel construction - gives the sink tip out tray a metal build suited to a damp sink area.
• Stainless steel finish - provides a consistent look for buyers who want a metal tray in the sink cabinet.
• 19 inch length - helps buyers match the tray to a sink front opening where a longer narrow tray is needed.
• 1-11/16 inch depth - supports use in slim spaces behind a sink false front where deeper trays may not fit.
• 3 inch height - gives the tray sidewalls enough height to hold small sink-area items while staying within the tip-out format.
• No tab stop design - helps buyers choose the exact tray style specified for their cabinet hardware setup.
• Single tray package - makes it clear this listing is for one sink tip-out tray sold each.

Confirm sink tip out tray fit and contents

Key specs to confirm: This sink tip out tray is a Rev-A-Shelf 6541 Series stainless steel tray measuring 19 inches long, 1-11/16 inches deep, and 3 inches high. Buyers should confirm the false front opening width, the available depth behind the sink front, and the interior clearance around the sink bowl, faucet hardware, and plumbing. This product is identified as a no tab stop tray, so buyers should confirm that this tray style matches the hardware arrangement they plan to use. Hinge inclusion is not verified for this specific part, even though the series is available with and without hinges, so included hardware should be confirmed before purchase. Any compliance or installation details not shown here should be confirmed with the manufacturer or technical documentation.

What's included: One Rev-A-Shelf 6541-19-5 stainless steel sink tip out tray. The verified data states this item is packed and sold each. Hinge inclusion should be confirmed before ordering.

What to verify before ordering: Confirm your sink front opening can accept a 19 inch tray, verify that 1-11/16 inch depth clears the sink and plumbing, check whether your project requires a tray with or without hinges, and make sure a no tab stop tray matches your intended installation method.

Compare stainless steel sink tip out tray details

Use a sink front tray near sinks

A sink tip out tray is typically used in the false drawer front space below a sink. That area is often too shallow for a standard drawer, but it can still hold small items when fitted with the right tray and hinge arrangement. The Rev-A-Shelf 6541 series sink tip out tray is built for that kind of narrow storage zone. In this case, the verified dimensions are 19 inches long, 1-11/16 inches deep, and 3 inches high, which makes this tray relevant for buyers looking for a slim sink front tray rather than a deeper organizer.

Professional installers may use a sink tip out tray when building out a kitchen or bath cabinet where the false front would otherwise remain unused. Serious DIY buyers may look for the same product when replacing an older tray that has cracked, stained, or no longer fits the cabinet front correctly. Because this unit is stainless steel, it suits a location near water where buyers often prefer a metal tray. The stainless steel finish also gives the tray a clear visual match to the material listed in the product data.

For replacement work, RS6541-19-5 is useful as a direct search term when the old tray or project paperwork already references that part number. For new installations, the main issue is fit. Buyers should measure the inside width available behind the false front, then verify that the 19 inch tray length works within that opening. The 1-11/16 inch depth matters because sink bowls, clips, and plumbing can reduce usable space quickly. The 3 inch height should also be checked against the cabinet front and hardware movement. If your project requires hinges, confirm whether they are included with this exact item, since the verified series description says sink tip-out trays are available with and without hinges but does not verify hinge inclusion for this specific model.

Compare stainless steel tip out tray options

When buyers compare one tip out tray to another, the most useful differences are usually material, dimensions, and hardware style. This Rev-A-Shelf sink tip out tray is clearly identified as stainless steel, and the product data gives exact size information. That makes it easier to compare against another tray already in the cabinet or against the measured sink front opening. A tray with the wrong length may not center well behind the panel, and a tray with too much depth may interfere with the sink or plumbing.

The no tab stop detail is another point to compare before ordering. Buyers who are matching an existing setup should confirm whether their current tray uses this style. If they are starting from scratch, they should review the installation method required for the cabinet front hardware they plan to use. Since this listing is for one tray sold each, project planners should also confirm quantity if they are ordering for multiple sink bases.

Rev-A-Shelf is a recognized cabinet accessory brand in the verified product data, and the 6541 series gives buyers a defined tray family with slim depths and several available lengths. That series consistency can help when a project needs a similar tray style across more than one cabinet size. Rather than choosing by appearance alone, buyers should compare by exact measurements, tray material, and whether hinges or other mounting parts are included with the specific part they are buying.

Check sink tip out tray ordering questions

Order the right Rev-A-Shelf sink tip out tray

RS6541-19-5 is a practical way to specify this exact Rev-A-Shelf sink tip out tray when you need a 19 inch stainless steel tray for a sink front application. Before purchase, confirm the opening size, the shallow 1-11/16 inch depth clearance, and whether your project needs hinges included or supplied separately. This listing verifies one stainless steel tray with a 3 inch height and no tab stop design, so checking those details first helps avoid fit issues and repeat orders.