Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Grass Tiomos soft-close hinge is built for inset doors, seating the cup in the door and mounting to the cabinet with pre-attached dowels, on both face-frame and frameless boxes.
An inset door sits inside the cabinet opening rather than over it, framed by a narrow, even gap on all four sides. That look depends on precise fitting and a hinge that holds its position. The full crank arm on this Tiomos hinge carries the geometry for an inset door: the 35mm cup seats in a bored hole in the door back, and the arm connects to a Grass Tiomos base plate on the cabinet, which is sold separately. The Grass Tiomos boring pattern is 42mm, so confirm this matches your existing holes before ordering for a replacement job. A mounting plate designed for Grass Tiomos is the correct pairing; plates from other brands will not connect to this arm.
The hinge body is steel finished in nickel, a neutral tone that stays out of sight once the door closes and works without clashing on installations where hinge hardware is occasionally visible. The cup depth is 12.6mm, and the hinge accommodates doors up to 24mm thick, which covers standard cabinetry stock and slightly thicker inset door panels. The three-way adjustment gives 3mm of play in each direction, which is the working range that brings an inset door to a consistent reveal after the box is installed and the house settles.
Reach for this hinge on frameless or face-frame cabinets where the design calls for a flush, traditional inset door face and the work demands a quiet, controlled close. It suits furniture makers and custom cabinet shops building high-end residential pieces where reveal consistency is a deliverable, and contractors installing kitchen or bath cabinetry where the inset look is the spec. The dowel mount speeds door loading in a production workflow: no cup screws to drive, just press and clip. For overlay doors on the same project, a Tiomos overlay hinge keeps the plate system consistent across the job.
Yes. The hinge arm connects to a Grass Tiomos base plate that mounts to the cabinet side or face frame, and that plate is sold separately. Use a plate matched to the Grass Tiomos system and your cabinet construction.
The cup carries pre-attached dowels that press directly into bored dowel holes in the door. There are no cup screws to drive, which speeds up door loading in a production or CNC environment where the holes are already bored to spec.
Yes. Many concealed hinges use a 45mm bore pattern, but Grass Tiomos uses 42mm. For a replacement job, measure your existing hole spacing before ordering to confirm a match.
Yes. This hinge works on both face-frame and frameless cabinets when paired with the appropriate Grass Tiomos plate for your cabinet type.
Specify this hinge when the job calls for inset doors that sit flush, close without noise, and hold their reveal over time on either frameless or face-frame casework.
Sold In: 1 Each
