110-Degree Soft-Close Concealed Hinge for Flush Inset Doors

This Grass Tiomos concealed hinge is built specifically for inset doors, where the door panel sits flush inside the cabinet opening rather than over it. Soft-close is integrated, and dowel mounting presses the cup into the door without screws, on both face-frame and frameless cabinets.

Key Features

• Integrated soft-close damps the door through the final degrees of travel so it settles without slamming.
• Inset geometry with full crank arm positions the door flush inside the opening with an even reveal on all sides.
• 110-degree opening angle provides standard everyday access on a flush-fitted door.
• Dowel mount presses the 35mm cup into pre-bored dowel holes, eliminating cup screws for a clean, production-ready install.
• Three-way adjustment at plus or minus 3mm height, side, and depth dials every door to an even reveal after hanging.
• Face-frame and frameless compatibility makes this hinge at home in both traditional and European-style cabinet boxes.

The Right Hinge for a Flush Inset Install

An inset door sits inside the cabinet opening with a small, even gap on every edge. That gap is the design, and keeping it consistent is what the install is about. This hinge carries the inset crank geometry that clears the door through its full swing without binding the reveal, and the three-way adjustment brings every door into alignment after the cabinet is set. The 35mm cup bores into the door back, and the hinge arm connects to a Grass base plate mounted to the cabinet, which is a separate purchase matched to your cabinet construction and door position. Dowel mounting means the cup presses into pre-bored dowel holes in the door, so there are no cup screws to drive in a production run.

Steel Build in a Nickel Finish

The hinge body is steel in a nickel finish, consistent with the Tiomos platform's construction. Integrated soft-close is built into the hinge rather than added on, so the damping is part of the mechanism and not a clip-on accessory to source separately. For inset work, where the door lives in tight clearance, a built-in damper protects both the door edge and the reveal from the wear that a slamming close would cause over time. The 45mm boring pattern aligns with standard CNC programming, and the 35mm cup with 12.6mm cup depth suits doors in the standard thickness range, up to 24mm maximum.

Where This Hinge Belongs

This hinge is the right choice for cabinet shops and installers fitting inset doors on frameless Euro boxes or face-frame cabinets where the design calls for a flush, furniture-quality face. It suits production environments that bore on a CNC, since the dowel cup presses in without screws and keeps the line moving. Designers specifying premium kitchens or built-in furniture will find the Tiomos soft-close damping and three-way adjustment worth the investment when the reveal has to be perfect. For overlay applications, this inset hinge is not the right geometry: choose the Tiomos full or half overlay version instead.

Common Questions

Precise Reveals, Quiet Closes, Production-Ready Boring

Specify this Tiomos hinge when the job calls for flush inset doors that hang square, adjust cleanly, and close without a sound.