Screw-On Concealed Hinge For Flush Inset Doors

This Grass Tiomos concealed hinge is built for inset doors that sit flush inside the cabinet opening, with integrated soft-close and a screw-on mount for both face-frame and frameless cabinets.

Key Features

• Integrated soft-close damps the door through the final closing arc so it settles without slamming.
• Inset geometry with full crank arm positions the door flush inside the opening with a consistent reveal on all sides.
• 110 degree opening angle delivers standard everyday swing on a precision-fitted inset door.
• Screw-on mount fastens the hinge directly to the cabinet without a clip or tool-free adapter.
• Three-way adjustment, plus or minus 3mm in height, depth, and side, for dialing in even reveals after installation.
• Works on face-frame and frameless cabinets when paired with the matching Grass base plate, sold separately.

Holding a Tight Inset Fit

Inset doors are fitted to a reveal, not an overlap, so every hinge choice matters more than it does on an overlay door. This Tiomos hinge carries the inset geometry that lets the door swing free inside the opening without binding, while the soft-close damper protects that fit by taking the impact out of daily closing. The 35mm cup bores into the door back, and the arm mounts to a Grass base plate on the cabinet, ordered separately. Because plates are series-specific, pair this hinge with a Grass Tiomos plate; plates from other brands will not connect to the Tiomos arm.

Steel Construction, Nickel Finish, and Precise Adjustment

The hinge body is steel in a nickel finish. For inset work, the three-way adjustment range matters as much as the material: the plus or minus 3mm in height, side, and depth gives enough latitude to true up doors that settle slightly after install, keeping reveals even across a run of cabinets without re-boring. Maximum door thickness for this hinge is 24mm, covering standard doors with room to spare for slightly thicker inset panels.

Where This Hinge Belongs

Reach for this hinge when the design calls for the flush, furniture-quality look of inset doors on either a face-frame or frameless box. It suits cabinet shops and finish carpenters who need a repeatable inset result and want the Tiomos build quality behind it. The screw-on mount is a straight mechanical connection: no clip mechanism to wear, no system holes required in the cabinet. If a project mixes this hinge with other Tiomos variants, note that the 45mm bore pattern is sourced from the product attributes and should be confirmed against the existing boring in replacement applications.

Common Questions

An Inset Result That Stays True

When the job calls for flush inset doors that close quietly and hold their reveals over time, this Grass Tiomos hinge gives you the geometry, the damping, and the adjustment range to get there on either cabinet type.