
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
12 inch undermount drawer slides from Knape and Vogt give a full extension undermount solution, so the drawer opens its full travel and the hardware stays hidden under the box, which helps keep cabinet interiors clean and unobstructed during use. The soft close system with adapting damping slows the drawer at the end of travel, so the drawer closes gently, which helps control impact on the drawer box over time. Full extension with synchronization travel keeps both slides moving together, so the drawer tracks straight in and out under load. This undermount drawer slide is part of the KVSUMB 901 12 series, so it fits projects calling for that specific manufacturer part number. The slide is classified as an undermount drawer slide, so it mounts underneath the drawer rather than on the side, which helps maximize usable drawer width in cabinets.
This Knape and Vogt soft close undermount drawer slide uses a 2D (4-way) micro roller adjustable system for height and horizontal movement, so the drawer height and side-to-side position can be fine-tuned after mounting. Height adjustment up and down helps align the drawer front vertically with adjacent fronts, which supports consistent reveals across a cabinet run. Horizontal side-to-side adjustment lets the installer nudge the box laterally, which helps square face gaps and reduce rubbing. Depth adjustment is achieved by elongated holes in the slide, so the drawer position front-to-back can be set by shifting within those slots, which supports aligning drawer fronts flush with the cabinet face. Smart Lock front locking devices are sold separately, so this slide pairs with that front locking approach when that component is used on a job.
These Knape and Vogt undermount drawer slides are designed as soft close full extension hardware for drawer boxes built with 5/8 inch (16 mm) material, so they suit projects built around that side thickness. The minimum inside drawer width of 8-5/32 inch (207 mm) sets a practical lower limit on drawer interior size, so they align with cabinet openings that support that width or larger. A dynamic load capacity of 66 lb (30 kg) defines the moving load range, so they are suited to drawers expected to carry contents within that rating. The classification as undermount drawer slides positions them beneath the drawer box, so they are appropriate where an unobstructed drawer side and a cleaner interior appearance are priorities.
The 2D (4-way) micro roller adjustable feature allows height and horizontal adjustments, so installers can dial in reveals around the drawer front without rebuilding the box. Height (up and down) adjustment helps line up multiple drawer fronts in a stack, which supports a uniform look across a cabinet bank. Horizontal (side-to-side) adjustment helps correct minor box or opening variation, which reduces binding and helps drawers run freely. Depth adjustment through elongated holes in the slide lets the drawer be shifted front-to-back during installation, which helps achieve even front projection across different cabinet runs using the same slide model. The soft close system with adapting damping works at the end of travel, so even after alignment changes the closing motion remains controlled, which supports repeatable operation as drawers are opened and closed many times.
The KVSUMB 901 12 is a Knape and Vogt Samet soft close full extension undermount drawer slide, so it mounts under the drawer and provides concealed, controlled movement.
These undermount drawer slides have a 66 lb (30 kg) dynamic load capacity, so they are rated for drawers that will be moved regularly with contents within that weight range.
These slides are designed for a maximum drawer box material thickness of 5/8 inch (16 mm), so drawer sides need to be built to that thickness or less for proper fit.
This Knape and Vogt model specifies a minimum inside drawer width of 8-5/32 inch (207 mm), so drawer interiors narrower than that fall outside the stated design range.
These slides use 2D (4-way) micro roller adjustment for height and horizontal positioning, and depth adjustment is achieved by elongated holes, so installers can fine-tune drawer alignment.
These undermount drawer slides exceed ANSI/BHMA A156.9-2010 technical specifications, so their performance relates directly to that established drawer slide standard.
Full extension with synchronization travel and a soft close system makes these Knape and Vogt 12 inch undermount drawer slides a fit for drawers that need full access and controlled closing. The 2D (4-way) micro roller adjustable design, combined with depth adjustment through elongated holes, supports on-the-job alignment of height, side-to-side, and front-to-back position. A maximum drawer box material thickness of 5/8 inch (16 mm) and a minimum inside drawer width of 8-5/32 inch (207 mm) define the drawer construction these slides are designed to support. For projects matching these dimensions and load expectations, this KVSUMB 901 12 model provides a defined undermount soft close solution.
Sold In: 6 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KVSUMB-RB Mfr# KVSUMB B 102 | Samet Smart Slide Rear Mounting Bracket |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KVSUMB-2DR Mfr# KVSUMB LR 105 | Samet Smart Slide 2D Smart Locking Device Mechanism, Right Hand | ||||
Sold in: 1 Each | KVSUMB-2DL Mfr# KVSUMB LL 106 | Samet Smart Slide 2D Smart Locking Device Mechanism, Left Hand |