Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand front locking device for the Samet Smart Slide undermount drawer system, locking the drawer box onto its slides with 2D adjustment for precise front alignment in height and side position.
Front locking devices seat under the drawer box front and lock the drawer onto the undermount slides — this is the connection point that holds the box in place and lets you fine-tune the drawer front's position. The 2D adjustment on this device covers the two most common alignment corrections after hang: height and side. Height adjustment reaches up to 2 mm to bring the front level with neighboring drawers; side adjustment spans +/- 1.5 mm to close or open the reveal on either edge. Both adjustments are made after the drawer is fully installed, which means you can match a front to the surrounding cabinet without pulling the drawer box back out.
The gray plastic finish sits between the black and white ends of the color palette. In cabinets with gray or natural interior panels, it blends into the hardware rather than drawing the eye. Because the locking device is beneath the drawer box and out of the finished interior's sightline, color choice here is mostly about matching your shop's standard or your cabinet line's interior palette. Gray works well where white reads too stark against a natural panel and black reads too heavy against a lighter box bottom.
Cabinet shops building on the Samet Smart Slide undermount platform will order this device to complete or replace the front attachment hardware on a left-hand drawer position. It is also the right part for a service call where only one side's locking device needs replacement — ordered as a single left-hand piece rather than a full set. Designers specifying the Samet Smart Slide system should confirm the orientation required at each drawer position: this device covers the left side only, and the right-hand version is a separate SKU.
No. Locking devices are engineered to their specific slide system. This device is for the Samet Smart Slide undermount platform only and will not seat correctly on Blum, Grass, Hettich, or other undermount slides.
Yes, if you are completing a drawer. This is the left-hand member; a working installation requires one left-hand and one right-hand front locking device. Order the matching right-hand SKU separately.
Yes. The 2D adjustment is designed for post-installation correction — height and side position are both adjustable without removing the drawer box from the cabinet.
The mounting method is not specified in the source data for this SKU. Refer to the Samet Smart Slide installation guide for the correct fixing method before drilling or driving hardware.
One left-hand locking device, gray, sized and engineered for the Samet Smart Slide system — the detail that holds the drawer in place and lets you nail the front alignment on the first hang.
Sold In: 1 Each
