Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand front locking device for the Samet Smart Slide undermount drawer system, providing the mechanical connection between the drawer box and the slide while allowing two-axis fine-tuning of the installed front. It is a system-specific component — order it as the right-hand piece to complete a pair when replacing or installing in a Samet Smart Slide drawer.
The front locking device is what holds an undermount drawer in place once the box is seated on the slides. On a Samet Smart Slide installation, the locking device clips under the front of the drawer box, locks the box onto the slide, and gives the installer the two adjustment directions needed to align the front panel precisely. It is the piece you reach for when a drawer front sits slightly high, low, or off to one side after the initial hang — the 2D mechanism corrects both problems without pulling the box out.
This component is used in production cabinet shops and on-site installations wherever Samet Smart Slide undermount slides are already specified. It is not compatible with other undermount systems, including TANDEM, MOVENTO, Dynapro, or Actro runners — locking devices are engineered per brand and per series.
The locking device is molded in gray plastic, matching the hardware palette of the Samet Smart Slide system. Gray reads as a neutral inside most cabinet interiors, from painted white boxes to raw or stained hardwood. Because it is concealed under the drawer box front when the drawer is closed, the finish is a practical fit consideration rather than a visible design detail — gray works where white or black clips would stand out against the surrounding material.
Cabinet shops running Samet Smart Slide undermount slides on a production line will keep these on hand as a consumable pairing item — one right-hand and one left-hand device per drawer. Installers who are fitting out face-frame or frameless cabinets with Samet Smart Slide hardware, or who are replacing a damaged clip in an existing installation, should order by handedness and confirm the series matches their existing slides before ordering. This is a right-hand-only piece; the left-hand device is a separate SKU, and two of the same hand will not make a working set.
Two — one right-hand and one left-hand device per drawer. This listing covers the right-hand piece only; order the left-hand device separately to complete the pair.
No. This locking device is engineered specifically for the Samet Smart Slide system. It is not interchangeable with locking devices from other brands or slide series.
After the drawer is hung on the slides, the locking device lets you shift the front up to +2 mm in height and +/- 1.5 mm side-to-side without removing the drawer box — two directions of fine-tuning from a single accessible point under the front.
The device is hidden under the drawer box front when the drawer is closed, so the gray finish is visible only during installation or if the drawer is removed. It will not show through the front panel in normal use.
A drawer front that is off by a millimeter draws the eye every time the cabinet is used. This right-hand Samet Smart Slide locking device gives the installer the adjustment range to get the reveal right the first time and keep it there.
Sold In: 1 Each
