CompX National Disc Tumbler Cam Lock, 1-3/4" Cylinder with 90 and 180 Degree CW and CCW Rotation, Flat Black C8060-C346A-Y21
Description
CompX National Disc Tumbler Cam Lock For Cabinets
CompX National disc tumbler cam lock gives you keyed security for drawers and right-hand or left-hand doors using a 1-3/4 inch cylinder, so you can handle common cabinet front and frame thicknesses in one lock body. The flat black finish matches the SAP description CAM LOCK, BLACK, 8060KA-346, so this lock fits projects where a dark, low-visibility appearance is preferred. The manufacturer part C8060-C346A-Y21 identifies this specific combination of cylinder length, finish, and hardware configuration, helping you match it to existing keyed systems or project documentation. As a cam lock in the Locks and Latches category, it provides a rotating cam to secure cabinet components, so you can add point-of-use locking where a full latch set is not required. This configuration works in typical woodworking environments where a simple quarter-turn or half-turn motion is the practical way to secure doors and drawers.
Cam Lock Details That Support Cabinet Projects
- Two stop washers allow cam rotation of either 90 or 180 degrees clockwise or counterclockwise, so you can set the throw length to match how far the cam must travel to engage the cabinet strike or frame.
- The same lock is specified for drawers and for right-hand or left-hand doors, so one part number can be used across multiple cabinet layouts without changing your boring pattern or planning different lock types.
- Cams are provided for lipped or overlay construction with a straight cam having a 1-1/2 inch extension, so you can reach behind an overlay front where the door or drawer face stands proud of the cabinet box.
- A formed cam is specified for flush construction with a 1-1/8 inch extension and 11/32 inch offset, which lets the cam sit in the correct plane relative to a flush front, helping the cam meet the frame surface squarely.
- For overlay applications, the combined thickness of front and frame cannot exceed the listed cylinder length, so the 1-3/4 inch cylinder establishes how thick a sandwich of material you can lock through without losing cam engagement.
- Stock keying defined as KA means all keyed alike to the specified key number and KD means all keyed different, so you can choose between single-key convenience across multiple locks or unique keys for each locking point.
Cam Lock Mounting And Rotation Setup
This 1-3/4 inch cylinder cam lock uses stop washers to control rotation, so you can choose either a 90 degree or 180 degree cam turn to suit your cabinet geometry. The ability to rotate clockwise or counterclockwise lets you orient the cam to swing toward the strike or frame regardless of whether you are working on right-hand or left-hand doors, simplifying layout in mixed-door runs. The spur washer referenced for wood installations bites into the wood surface under the mounting nut, which helps resist lock body rotation when the key is turned. By pairing the cylinder length with the maximum combined front and frame thickness guideline, you can select this C8060-C346A-Y21 version when your overlay or flush construction falls within the 1-3/4 inch reach of the lock barrel, helping the cam land in its working position.
Using This Cam Lock In Woodworking Projects
Where This Flat Black Cam Lock Is Applied
This CompX National cam lock is specified for drawers and both right-hand and left-hand doors, so it fits typical cabinet casework, storage compartments, and similar enclosures in woodworking projects. The lipped or overlay construction support with a straight cam having a 1-1/2 inch extension lets the cam reach around an overhanging front, which is common in face-frame or overlay frameless cabinets. For flush construction, the formed cam with 1-1/8 inch extension and 11/32 inch offset positions the cam so it aligns with a flush face, which is helpful in modern frameless cabinets or built-ins where fronts sit in the same plane as the cabinet sides. The 1-3/4 inch cylinder length defines the envelope of usable material thickness for front plus frame, so this lock works when your combined build-up stays within that limit. As a disc tumbler cam lock, it offers key-controlled rotation of the cam, so drawers and doors can be secured wherever a rotating latch surface can hook or bear against a frame member.
Why These Cam And Keying Details Matter
The stop washers that support both 90 degree and 180 degree cam turns give flexibility in setting how far the cam swings, which can reduce rework when strike location changes or when different cabinet sections need different throw lengths. Clockwise and counterclockwise rotation options let you orient the key and cam relationship to avoid interference with shelves or dividers, while still keeping the locked position where you want it. Key removable in both locked and unlocked positions means the key can be taken out after locking or after opening, which fits workflows where the cabinet stays unlocked during active use and is only locked at certain times. The trim washer and spur washer for wood, paired with the mounting nut, create a clamping stack that stabilizes the cylinder in the panel, helping the cam stay aligned with the strike over repeated locking cycles. Stock keying options KA for all keyed alike to a designated key number and KD for all keyed different allow planning of key control on a project, so you can standardize keys in one area while keeping other areas on separate key runs. The mention of NLC8073 and NLC7014-2C for a 3/4 inch front plus 3/4 inch frame overlay situation shows how cylinder length interacts with construction thickness, highlighting why the 1-3/4 inch cylinder on this C8060-C346A-Y21 matters when selecting for a given cabinet build-up.
Common Questions About This CompX National Cam Lock
What type of lock is the C8060-C346A-Y21?
The C8060-C346A-Y21 is a CompX National disc tumbler cam lock, so it uses a rotating cam driven by a key-controlled cylinder to secure cabinet drawers and doors.
Where can this cam lock be used on cabinets?
This cam lock is specified for drawers and for right-hand or left-hand doors, covering common cabinet storage points that need key control in woodworking installations.
How does the 1-3/4 inch cylinder length affect use?
The 1-3/4 inch cylinder length defines the maximum combined front and frame thickness the cam can span, so it suits cabinet constructions within that material build-up.
How is cam rotation adjusted on this lock?
This cam lock uses two stop washers to set 90 or 180 degree rotation clockwise or counterclockwise, letting you match cam travel and direction to your strike position.
What cabinet constructions do the supplied cams address?
The straight cam with 1-1/2 inch extension works with lipped or overlay construction, while the formed cam with 1-1/8 inch extension and 11/32 inch offset serves flush construction.
What do KA and KD stock keying options mean?
KA means all locks keyed alike to one specified key number, while KD means all locks keyed different with various lock numbers, affecting how keys are managed on a project.
Selecting This Cam Lock For Your Next Build
This CompX National disc tumbler cam lock with 1-3/4 inch cylinder, flat black finish, and selectable 90 or 180 degree rotation is built for drawers and both right-hand and left-hand doors, so it fits a wide range of cabinet layouts. With cams for lipped or overlay and flush construction, plus KA or KD stock keying choices, it lets you align lock function, appearance, and key control with your project requirements. Use this C8060-C346A-Y21 configuration when you need a cam lock that pairs defined cylinder reach with flexible rotation and cam geometry for typical woodworking applications.