CompX National Disc Tumbler Cam Lock, 1-3/4" Cylinder with 90 and 180 Degree CW and CCW Rotation, Flat Black C8060-C413A-Y21
Description
CompX National Disc Tumbler Cam Lock For Casework
CompX National disc tumbler cam lock is a flat black cam lock with a 1-3/4 inch cylinder that secures drawers and right-hand or left-hand doors, so you can use one lock family across multiple cabinet layouts in the same project. The lock uses a disc tumbler mechanism, which provides keyed control in typical woodworking and casework applications where a compact lock is needed. The cylinder length is designed so the combined thickness of the front and frame cannot exceed the cylinder length, which helps keep the cam positioned correctly on the back of the panel for positive latch action. Stock keying is available keyed alike to a specified key number (KA) or keyed different (KD), which lets you select a keying scheme that matches job security and key-control requirements.
Cam Lock Details That Support Real Install Jobs
- The 1-3/4 inch cylinder length provides reach through typical cabinet fronts and frames, so the cam engages behind the strike area without crowding other hardware in the cavity.
- The flat black finish gives a low-visibility appearance on dark casework, helping the lock blend into modern cabinet fascias in commercial or residential projects.
- The disc tumbler design provides keyed operation suited to everyday cabinet and drawer security, giving users controlled access without bulky hardware.
- The manufacturer part number C8060-C413A-Y21 identifies this exact configuration, helping you match replacements or extend a keyed system on repeat jobs or expansions.
- Stock keying options designated KA or KD let you align groups of locks to a shared key or separate them by location, simplifying key management on multi-cabinet installations.
Installation Rotation And Cam Options For Fit
This cam lock uses stop washers that allow the cam to turn either 90 degrees or 180 degrees clockwise or counterclockwise, so you can set the rotation that best matches the door or drawer swing and strike location. The cam options support both lipped or overlay construction with a straight cam with 1-1/2 inch extension and flush construction with a formed cam with 1-1/8 inch extension and 11/32 inch offset, giving flexibility across different cabinet build-ups. For overlay applications, the combined thickness of the front and frame cannot exceed the cylinder length, which keeps the threaded body engaged and the cam seated firmly behind the material stack. Key removal in both locked and unlocked positions lets users remove the key after locking or unlocking, which is useful where the same operator moves between multiple cabinets during daily work.
Using This Cam Lock In Cabinet And Drawer Work
Where This Cam Lock Fits In Cabinet Construction
This CompX National cam lock is described for drawers and for right-hand or left-hand doors, so it can be used across a run of casework with mixed openings. The 1-3/4 inch cylinder allows installation through fronts and frames whose combined thickness stays within that length, aligning the cam behind the interior surface for reliable engagement. Cams are described for lipped or overlay construction using a straight cam with 1-1/2 inch extension, which positions the cam reach behind an overlay front. Cams are also described for flush construction using a formed cam with 1-1/8 inch extension and 11/32 inch offset, positioning the cam to catch the frame or strike surface behind a flush door or drawer front. For an overlay construction using a 3/4 inch front and 3/4 inch frame, the data specifies ordering the NLC8073 lock and the NLC7014-2C cam, which indicates this particular configuration is intended for different material build-ups.
Why Rotation, Keying, And Core Options Matter On Site
The stop washers provided for both 90 degree or 180 degree cam turns let you match the throw length and travel to the door or drawer design, which helps prevent over-travel that could stress the panel or under-travel that would not secure the opening. The ability to rotate clockwise or counterclockwise supports both right-hand and left-hand doors, so the same lock model can be oriented to suit the swing without altering the casework. Key removable in both locked and unlocked positions allows users to leave the lock open or secured while still removing the key, which is practical where keys are managed centrally. Stock keying called out as KA, meaning all keyed alike to a specified key number that does not accept a master key, is useful when a group of cabinets is intended to share a single key pattern. Stock keying called out as KD, meaning all keyed different with various lock numbers, is useful when each opening must remain on its own key code for separate access. Unassembled REMOVACORE versions of this lock are described as available, indicating there are variants designed around a removable core concept for projects that require that service approach.
Common Questions On This CompX Cam Lock Setup
What type of cylinder does the C8060-C413A-Y21 cam lock use?
The C8060-C413A-Y21 cam lock uses a 1-3/4 inch disc tumbler cylinder, which reaches through typical cabinet fronts and frames so the cam can engage behind the interior surface.
How can this cam lock be used on drawers and doors?
The cam lock is described for drawers and for right-hand or left-hand doors, so it can be installed on different opening types across the same run of casework.
What cam options are described for different cabinet constructions?
The product description notes a straight cam with 1-1/2 inch extension for lipped or overlay construction and a formed cam with 1-1/8 inch extension and 11/32 inch offset for flush construction.
How does the 90 or 180 degree cam rotation help installation?
The stop washers allow either 90 degree or 180 degree cam turns clockwise or counterclockwise, so you can set the throw length that matches the door or drawer design.
What do KA and KD keying options mean for this lock?
Stock keying KA means all locks are keyed alike to a specified key number that does not use a master key, while KD means all locks are keyed different with various lock numbers.
Is key removal possible when the cam lock is unlocked?
The lock is described as key removable in both locked and unlocked positions, which allows the operator to remove the key after securing or releasing the cabinet.
Select This Cam Lock For Your Next Cabinet Run
The CompX National disc tumbler cam lock in flat black with a 1-3/4 inch cylinder, stop washers for 90 or 180 degree rotation, and cam options for lipped or flush construction gives installers a defined solution for drawers and right-hand or left-hand doors. With specified KA or KD stock keying and the C8060-C413A-Y21 part number, it fits projects that need consistent key control and repeatable hardware selection across multiple cabinets. Use this lock when you need a compact casework solution that aligns rotation, reach, and keying details directly to the cabinet construction described.