CompX National Disc Tumbler Cam Lock, 1-3/4" Cylinder with 90 and 180 Degree CW and CCW Rotation, Flat Black C8060-C642A-Y21
Description
CompX National Disc Tumbler Cam Lock Function
CompX National disc tumbler cam lock gives you a keyed cylinder and cam action to secure drawers and right-hand or left-hand doors in cabinet and casework jobs. The 1-3/4 inch cylinder length provides a long body that suits thicker front and frame combinations where shorter cylinders would not reach through, supporting lock placement in deeper cabinet constructions. Flat black finish delivers a neutral, low-profile look that blends into darker fixtures, helping hardware visually disappear in many commercial and residential layouts. The C8060-C642A-Y21 model uses a disc tumbler mechanism that provides precise keying control, useful where you need keyed alike or keyed different setups as specified in stock keying tables. Key removable in both locked and unlocked positions lets installers remove the key after setting either state, which simplifies key handling when servicing multiple cabinets in a run.
Cam Lock Details That Support Cabinet Work
- 1-3/4 inch cylinder length gives extra reach through thicker cabinet fronts and frames, so the lock seats properly in deeper materials without modifying standard casework thicknesses.
- Flat black finish keeps the cam lock visually subdued on dark-colored drawers and doors, which helps hardware disappear in reception desks, fixtures, and furniture lines.
- Disc tumbler cam lock design provides mechanical key control for drawers and doors, supporting keyed arrangements defined by KA or KD patterns in stock keying tables.
- Key removable in both locked and unlocked positions allows the operator to remove the key after setting the desired state, which speeds up servicing rows of cabinets or lockers.
- For drawers and right-hand or left-hand doors, the lock works across common cabinet orientations, reducing the need to source different models for each swing direction.
Cam Rotation And Construction Setup In Use
Each lock uses stop washers that allow the cam to turn either 90 or 180 degrees clockwise or counterclockwise, so you can match the throw to the specific drawer or door travel. This rotation flexibility lets the same C8060-C642A-Y21 lock serve multiple cabinet layouts, from short-throw desk drawers to wider door engagements. Cams are configured for lipped or overlay construction with a straight cam and 1-1/2 inch extension, or for flush construction with a formed cam, 1-1/8 inch extension, and 11/32 inch offset, which tailors the cam reach to different front-to-frame relationships. For overlay applications, the combined thickness of front and frame cannot exceed the cylinder length, keeping the locking bar within working range of the strike surface so the cam fully engages without binding.
Using This Cam Lock In Cabinet And Casework Builds
Where This C8060-C642A-Y21 Cam Lock Fits Best
This CompX National disc tumbler cam lock is specified for drawers and right-hand or left-hand doors, so it fits typical cabinet boxes, storage units, and furniture casework that require key control on swing or slide fronts. The ability to use straight or formed cams supports both lipped or overlay construction and flush construction, which covers common face-frame and frameless cabinet styles in shops serving mixed project types. The straight cam with 1-1/2 inch extension provides a longer reach suited to overlay fronts where the door or drawer front stands proud of the frame, allowing the cam to catch behind a strike surface. The formed cam with 1-1/8 inch extension and 11/32 inch offset positions the contact surface closer for flush fronts, helping the cam land squarely behind the panel edge without overtravel. When an overlay construction uses a 3/4 inch front and a 3/4 inch frame, the documentation specifies ordering the NLC8073 lock and the NLC7014-2C cam, which directs you to a configuration designed for that total thickness. The CAM LOCK BLACK 8060KA-642 description ties this model to the keyed arrangement and finish family, useful where matching black hardware and a defined 8060KA-642 keying setup are required across several cabinets.
Rotation Options And Keying Patterns For Repeatable Results
Stop washers provided for both 90 or 180 cam turns control how far the cam travels in either direction, supporting consistent latch engagement and helping prevent over-rotation that could misalign the cam with the strike. The ability to set clockwise or counterclockwise rotation gives flexibility to align the lock operation with the door swing or drawer geometry, which can simplify user interaction when multiple units are installed in the same area. Stock keying is defined as KA for all keyed alike to the specified key number, where a master key will not work on these locks, giving a uniform key across many locks without master access. KD stock keying is defined as all keyed different, with various lock numbers, which is useful when each cabinet or drawer must remain on a unique key for separation of access. REMOVACORE versions of this lock are available, providing a removable core approach under the same lock family, which supports re-keying workflows that swap cores instead of replacing the entire cam lock body. Together, these rotation, keying, and core options allow the 1-3/4 inch cylinder cam lock to be deployed consistently across projects while matching access control requirements.
Common Cam Lock Questions For Cabinet Projects
What applications is this CompX National cam lock designed for?
The CompX National disc tumbler cam lock is intended for drawers and right-hand or left-hand doors, so it suits typical cabinet, casework, and furniture fronts needing keyed security.
How does the 1-3/4 inch cylinder length affect fit?
The 1-3/4 inch cylinder length allows the lock body to pass through thicker combined front and frame materials, so the cam reaches the strike point in deeper cabinet constructions.
What cam options are provided for different cabinet constructions?
The lock uses a straight cam with 1-1/2 inch extension for lipped or overlay construction and a formed cam with 1-1/8 inch extension and 11/32 inch offset for flush construction.
How do the 90 and 180 degree rotation settings help?
Stop washers allow 90 or 180 degree clockwise or counterclockwise rotation, so the cam throw can be matched to the drawer or door travel needed for positive engagement.
What is the benefit of key removable locked or unlocked?
Key removable in both locked and unlocked positions lets users withdraw the key after setting either state, which streamlines operation across multiple cabinets.
When is the NLC8073 lock and NLC7014-2C cam recommended?
For overlay setups using a 3/4 inch front and 3/4 inch frame, the documentation specifies ordering the NLC8073 lock and the NLC7014-2C cam to match that construction.
Selecting This Cam Lock For Your Next Build
The CompX National disc tumbler cam lock C8060-C642A-Y21 combines a 1-3/4 inch cylinder, flat black finish, and selectable 90 or 180 degree rotation to cover a wide range of drawer and door layouts. Straight and formed cam options support both lipped or overlay construction and flush construction, helping one lock family serve varied cabinet programs. Defined KA and KD keying descriptions, along with REMOVACORE versions in the same line, provide controlled access setups for projects from single cabinets to larger runs. For cabinet and woodworking shops sourcing through Wurth Baer Supply, this cam lock offers a consistent way to add keyed control where drawers and doors require dependable mechanical locking.