Salice F70 24" Soft-Close Full Extension Undermount Drawer Slides, Zinc - UBF70FLSC-24

Salice F70 24 Inch Undermount Slides For Drawers

Salice F70 24 inch undermount drawer slides give a 24 inch drawer a full extension travel path, so the drawer clears the front and exposes the full interior for access. These slides are an undermount drawer slide design, which positions the hardware under the drawer box to keep the sides clean and visually open during use. The slides are specified as full extension, so the drawer travels out to the rated stroke rather than stopping short in the cabinet, which is helpful when deep drawers hold tools or hardware bins. The Smove soft-close mechanism is fully integrated into the slide, so the damping is built into the runner rather than added as a separate device in the cabinet.

Key Salice F70 Soft Close Performance Details

• The Smove soft-close mechanism fully integrated into the slide controls closing speed, so drawers engage smoothly at the end of travel and avoid hard slams during everyday use.
• Full extension slide design provides complete access to the drawer interior, which simplifies loading, labeling, and picking items from the back of the drawer in cabinet or shop installations.
• The slides support 150 lbs dynamic load capacity, so they are suited to drawers that move under live loads while opening and closing during normal operation.
• The 170 lbs static load capacity rating describes what the installed slide set holds at rest, which matters when a loaded drawer sits extended for loading or sorting.
• Elongated holes for depth and height adjustment create play for fine tuning in the cabinet, which helps align the drawer front relative to the face and neighboring fronts.
• Adjustable clips allow easy drawer insertion and removal, so installers can hang and pull drawers during fitting without driving fasteners into the drawer box each time.

Adjustment And Installation Function For F70 Slides

These Salice F70 undermount slides work with 1/2 inch, or 12 mm, to 5/8 inch, or 16 mm, drawer thickness, so drawer box construction can stay within that common material range. Integrated tool free height adjustments of plus 2.5 mm are built into the system, so the front reveal can be shifted vertically without loosening mounting screws. Tool free depth adjustments of plus or minus 3 mm allow the drawer front to be brought forward or back relative to the cabinet, which helps align gaps where doors and drawers meet. Tool free side adjustments of plus or minus 1.5 mm refine the lateral position of the drawer front, so small offsets between adjacent fronts can be dialed in quickly. Optional tool free tilt adjustment of plus 3 mm is available, which helps correct top or bottom reveal differences on tall drawer fronts once the slides are installed.

Using Salice F70 Slides In Cabinet Projects

Where Salice F70 Undermount Slides Are Applied

This Salice F70 full extension undermount drawer slide is identified in the SAP description as a 24 F70 frameless soft close slide, so it is suited to frameless cabinet constructions using that slide length. The product class of undermount drawer slides defines the role under the drawer box, which is common in modern kitchen, bath, and shop cabinetry where visible hardware is minimized. These Salice America slides can be used for face frame application with block out, so they also work in face frame cabinets when a block out is installed to create the proper mounting surface. The specified drawer thickness range from 1/2 inch, or 12 mm, to 5/8 inch, or 16 mm, covers many plywood and panel stock options, so builders can keep consistent materials across different drawer sizes within a run of cabinetry.

How Salice F70 Details Support Repeatable Results

The integrated Smove soft-close mechanism in this F70 slide reduces closing impact, so drawer joints, fronts, and mounting points experience less abrupt loading over time. The combination of 150 lbs dynamic and 170 lbs static load capacity gives a clear envelope for planning storage loads, which is important when assigning these runners to wide or deep drawers in a shop or residential layout. Elongated holes for depth and height adjustment, along with the tool free height, depth, and side adjustments, allow installers to rough position the slides, hang the drawer, and then fine tune reveals without removing the drawer box repeatedly. Adjustable clips allow the drawer to be inserted and removed without tools once the slides are mounted, so fitting, finishing, or servicing drawers remains straightforward. Optional tool free tilt adjustment of plus 3 mm offers an additional correction axis, which helps keep large drawer fronts aligned when cabinets are installed against imperfect walls or floors. Being 100 percent made in Italy ties the Salice F70 system to a defined manufacturing origin, which matters for shops that align product sourcing with project specifications or customer preferences.

Common Questions About Salice F70 24 Inch Slides

Choose Salice F70 Slides For Precise Drawer Work

The Salice F70 24 inch soft-close full extension undermount drawer slide, part number UBF70FLSC-24, combines Smove soft-close, robust load ratings, and multiple tool free adjustments to support accurate drawer alignment. When a project calls for frameless or block out-supported face frame cabinets within the 1/2 inch to 5/8 inch drawer thickness range, this F70 slide gives a defined hardware solution. Select this Salice America undermount slide when full extension travel, integrated soft-close action, and fine tuning capability are needed in a 24 inch drawer installation.